Browse > Article
http://dx.doi.org/10.14775/ksmpe.2019.18.7.001

Characteristics of Chatter Stability Lobe in 2-DOF Machining System  

Lee, Hyuk (Graduate school of Mechanical Design Engineering, PUKYONG NATIONAL UNIVERSITY)
Chin, Dohun (Department of Industrial Health, CATHORIC UNIVERSITY OF PUSAN)
Yoon, Moonchul (Department of Mechanical Design Engineering, PUKYONG NATIONAL UNIVERSITY)
Publication Information
Journal of the Korean Society of Manufacturing Process Engineers / v.18, no.7, 2019 , pp. 1-7 More about this Journal
Abstract
A chatter lobe analysis is frequently used to look at the chatter state. Even if there is a lot of research on chatter, chatter lobe characteristics are not well defined. In this study, the chatter lobe behavior according to several variables of vibration mode is verified for further clarity. The dynamic variables of the chatter model are defined and their behaviors on chatter lobe boundary are analyzed in detail. In this sense, the chatter model with 2-DOF (2-DOF) was used to analyze chatter stability characteristics. The discussed results are satisfying and these can be used for the prediction of chatter existence in machining processes of 2-DOF systems in several revolution range. These analyses indicate a better agreement for predicting an appropriate stability lobe over a wide detailed range of critical depths of cut in machining operation. The results allow an excellent prediction of chatter according to various static and dynamic variables in machining states. The behavior of chatter dynamic variables in machining were also discussed in detail. All these results can also be applied to other machining processes by establishing a chatter model in a 2-DOF system.
Keywords
Chatter Lobe; Stability Region; Transfer Function;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Tobias, S. A. and Fishwick, W., "The Chatter of Lathe Tools under Orthogonal Cutting Conditions", Transactions of ASME, Vol. 80, pp. 1079-1088, 1958.
2 Tlusty, J. and Polacek, M., "The stability of machine tools against self-excited vibrations in machining", Proceedings of the International Research in Production Engineering Conference, Pittsburgh, PA, New York, pp. 465-474, 1963.
3 Meritt, H. E., "Theory of self-excited machine tool chatter", Transactions of the ASME, Journal of Engineering for Industry 87, pp. 447-454, 1965.   DOI
4 Altintas, Y., Manufacturing Automation, Cambridge Univ. Press, 2000.
5 Oh, S. L., Chin, D. H., Yoon, M. C., Ryoo, I. I. and Ha, M. K., "Chatter Mode and Stability Boundary Analysis in Turning", Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 14, No.5, 2005.
6 Yoon, M. C., Cho, H. D. and Kim, S. K., "A Study on Diagnostics of Machining System with ARMA Modeling and Spectrum Analysis", Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 8, No. 3, pp. 42-51, 1999.
7 Chin, D. H., Yoon, M. C., Yoon, S. K., and Cho, H. D., "Spectral analysis of malfunction mode in end-milling", J. of Mechanical Science and Technology, Vol. 21, pp. 1637-1643, 2007.   DOI
8 Kim, J. D. and Yoon, M. C. "Parametric modelling of uncoupled system", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 5, No. 3, pp. 36-42, 2006.
9 Kim, J. D. and Yoon, M. C., "Mode analysis of end-milling process by REIVM", KSMTE Autumn Conference, pp. 414-419, 2010.
10 Oh, S. L., Chin, D. H. and Yoon, M. C. "Detection and Analysis of Chatter in End-milling Operation", Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 13, No. 6, pp. 10-16, 2004.