• Archives of Pharmacal Research
• /
• v.26 no.4
• /
• pp.264-269
• /
• 2003

5-Aminosalicylic acid (5-ASA) is an active ingredient of therapeutic agents used for Crohn s disease and ulcerative colitis. Because it is absorbed rapidly and extensively in the upper intestine, delivery of the agent specifically to the colon is necessary. We selected taurine as a colon-specific promoiety and designed 5-aminosalicyltaurine (5-ASA-Tau) as a new colon-specific prodrug of 5-aminosalicylic acid (5-ASA). It was expected that introduction of taurine would restrict the absorption of the prodrug and show additive effect to the anti-inflammatory action of 5-ASA after hydrolysis. 5-ASA-Tau was prepared in good yield by a simple synthetic route. The apparent partition coefficient of 5-ASA-Tau in 1-octanol/pH 6.8 phosphate buffer or $CHCl_3$/pH 6.8 phosphate buffer was 0.10 or 0.18, respectively, at $37^{\circ}C$. To determine the chemical and biochemical stability in the upper intestinal environment, 5-ASA-Tau was incubated in pH 1.2 and 6.8 buffer solutions, and with the homogenates of tissue and contents of stomach or small intestine of rats at $37^{\circ}C$. 5-ASA was not detected from any of the incubation medium with no change in the concentration of 5-ASA-Tau. On incubation of 5-ASA-Tau with the cecal and colonic contents of rats, the fraction of the dose released as 5-ASA was 45% and 20%, respectively, in 8 h. Considering low partition coefficient and stability in the upper intestine, 5-ASA-Tau might be nonabsorbable and stable in the upper intestine. After oral administration, it would be delivered to the colon in intact form and release 5-ASA and taurine. These results suggested 5-ASA-Tau as a promising colon-specific prodrug of 5-ASA.

• Food Science of Animal Resources
• /
• v.34 no.2
• /
• pp.230-237
• /
• 2014

This study was designed to find the most suitable method and wall material for microencapsulation of the Lactobacillus plantarum to maintain cell viability in different environmental conditions. To improve the stability of L. plantarum, we developed an encapsulation system of L. plantarum, using water-in-oil emulsion system. For the encapsulation of L. plantarum, corn starch and glyceryl monostearate were selected to form gel beads. Then 10% (w/v) of starch was gelatinized by autoclaving to transit gel state, and cooled down at $60^{\circ}C$ and mixed with L. plantarum to encapsulate it. The encapsulated L. plantarum was tested for the tolerance of acidic conditions at different temperatures to investigate the encapsulation ability. The study indicated that the survival rate of the microencapsulated cells in starch matrix was significantly higher than that of free cells in low pH conditions with relatively higher temperature. The results showed that corn starch as a wall material and glycerol monostearate as a gelling agent in encapsulation could play a role in the viability of lactic acid bacteria in extreme conditions. Using the current study, it would be possible to formulate a new water-in-oil system as applied in the protection of L. plantarum from the gastric conditions for the encapsulation system used in chicken feed industry.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.18.2-18.2
• /
• 2010

For the past a few years, we have intensively researched the printable inorganic conductors and ZnO-based amorphous oxide semiconductors (AOSs) for thin-film transistors. For printable conductor materials, we have focused on the aqueous Ag and Cu ink which possess a variety of advantages, comparing with the conventional metal inks based on organic solvent system. The aqueous Ag ink was designed to achieve the long-term dispersion stability using a specific polymer which can act as a dispersant and capping agent, and the aqueous Cu ink was carefully formulated to endow the oxidation stability in air and even aqueous solvent system. The both inks were successfully printed onto either polymer or glass substrate, exhibiting the superior conductivity comparable to that of bulk one. For printable ZnO-based AOSs, we have researched the noble way to resolve the critical problem, a high processing-temperature above $400^{\circ}C$, and recently discovered that Ga doping in ZnO-based AOSs promotes the formation of oxide lattice structures with oxygen vacancies at low annealing-temperatures, which is essential for acceptable thin-film transistor performance. The mobility dependence on annealing temperature and AOS composition was analyzed, and the chemical role of Ga are clarified, as are requirements for solution-processed, low-temperature annealed AOSs.

• KSBB Journal
• /
• v.27 no.6
• /
• pp.330-334
• /
• 2012

This study was performed to investigate the inhibitory activity of ethanol extract from Ecklonia cava (EE-EC) against trypsin and the stability of this activity under various heat and pH conditions. As a results, The EE-EC showed trypsin inhibitory activity of 77, 54, and 32% at concentrations of 5, 2.5, and 1 mg/mL and was not affected by the heat treatment conditions used in this study. Whereas trypsin inhibitory activity of EE-EC was stable in the pH range of 2-8, but decreased with pH treatment of pH 10 compared with the control. Therefore, the EE-EC could be useful as a natural and functional agent.

• Journal of Pharmaceutical Investigation
• /
• v.36 no.4
• /
• pp.223-229
• /
• 2006

[ $PGE_1$ ]-ethyl ester intraurethral solutions were prepared in ethanol/propylene glycol mixture with penetration enhancer and viscosity-enhancing agent. The stability of $PGE_1$-ethyl ester in intraurethral solution was investigated at various temperature. Simultaneous determination of $PGE_1$-ethyl ester and $PGE_1$ was performed using a validated HPLC technique. In pentobarbital anesthetized cats, increase in intracavernous pressure(ICP), increase in penile length and duration of erectile response were determined after intraurethral application of $PGE_1$-ethyl ester solutions. $PGE_1$-ethyl ester solutions, when instilled into the eyes of rabbits, produces no noticeable irritation, or slight transient conjunctival irritation. From these results, ocular irritation of this solutions was judged as practically non-irritating. The stability study indicates that the therapeutically effective content in solution is well maintained for 46 weeks or longer when they are stored at $4^{\circ}C$. After intraurethral application of $PGE_1$-ethyl ester, ICP was increased and penile erection was induced. $PGE_1$-ethyl ester intraurethral solutions for erectile dysfunction could be developed and evaluated by employing feline erection model.

• Polymer(Korea)
• /
• v.26 no.4
• /
• pp.501-507
• /
• 2002

In this work, diglycidylether of bisphenol-S (DGEBS) epoxy resin was prepared by alkaline condensation of bisphenol-S (BPS) with epichlorohydrin (ECH) in the presence of NaOH catalyst. The structure of the synthesized DGEBS epoxy resin was confirmed by IR, NMR spectra, and elemental analysis. The curing reaction and glass transition temperature ($T_g$) of DGEBS epoxy resin cured with phthalic anhydride (PA) and tetrahydrophthalic anhydride (THPA) at curing agents were studied by dynamic differential scanning calorimetry (DSC). The thermal stability of the cured specimen was investigated by thermogravimetric analysis (TGA). As a result, the activation energy ($E_a$) of DGEBS/PA system was higher than that of DGEBS/THPA system, whereas $T_g$, initial decomposed temperature (IDT), and decomposition activation energy ($E_t$) of DGEBS/PA were lower than those of DGEBS/THPA. This was probably due to the fact that the crosslinking density of DGEBS/THPA was increased by ring strain of curing agent.

• Polymer(Korea)
• /
• v.35 no.1
• /
• pp.72-76
• /
• 2011

The physical properties of crosslinked poly(vinyl alcohol)(PVA) by natural dyes as crosslinking agents were investigated and a comparison was made with chemically crosslinked PVA by Polycup 172. It was found that natural anthocyanin and crocin made possible to crosslink PVA physically through the hydrogen bonding of OH in both PVA and natural dyes in the present with NaCl as a catalyst. The water swellability dramatically decreased and the physical crosslinking led to decreasing of crystallinity of PVA. The lowering of thermal stability was noticed in the physically crosslinked PVA compared to chemically crosslinked PVA due to its lower crosslink density. However even natural dyes have polysaccharides in their chain, their thermal stability was higher than uncrosslinked PVA.

• Macromolecular Research
• /
• v.17 no.2
• /
• pp.128-132
• /
• 2009

Fucoidan, a sulfated polysaccharide derived from brown seaweed, is an important material valued for its various biological functions, including anti-coagulation, anti-aging, and immune system support. In this study, we examined the potential of fucoidan as a novel emulsifying agent in BSA (bovine serum albumin)-stabilized emulsion at a neutral pH. We measured the dispersed oil-droplet size, surface zeta-potential and creaming formation of 0.5 wt% BSA emulsion (20 wt% oil traction) in the absence and presence of fucoidan. The average particle size and zeta-potential value were 625.4 nm and -30.91 mV in only BSA-stabilized emulsion and 745.2 nm and -44.2 mV in 1.0 wt% fucoidan-added BSA emulsion, respectively. This result suggested that some positive charges of the BSA molecules interacted with the negative charges of fucoidan to inhibit the flocculation among the oil droplets. The creaming rate calculated from the backscattering data measured by Turbiscan dramatically decreased in 1.0 wt% fucoidan-added BSA emulsion during storage. Accordingly, the repulsion forces induced among the oil particles coated with 1.0 wt% fucoidan in emulsion solution resulted in significantly increased emulsion stability. The turbidity of the BSA-stabilized emulsion at 500 nm decreased during five days of storage. However, the fucoidan-added BSA emulsion exhibited a higher value of turbidity than the BSA-stabilized emulsion did. In conclusion, an anionic sulfated fucoidan lowered the surface zeta-potential of BSA-coated oil droplets via the electrostatic interaction, and subsequently inhibited the flocculation among the oil droplets, thereby clearly minimizing the creaming and phase separation of the emulsion.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.2
• /
• pp.153-158
• /
• 2004

In cosmetics, the saturated lecithin, one of the main surfactants to prepare liposome has been used for its stability but it has been substituting with unsaturated lecithin which has excellent skin affinity and penetration property. So we studied to prepare nano-liposome that size of particles were below than 50nm by unsaturated lecithin. It was important that many factors including solvent such as propylene glycol, pH balance, homogenizing pressure, various cosurfactants and stabilizers to make stable nano-liposome. In our experimental conditions, cosurfactants with stearate class as lipophilic part were more suitable than others for our purpose. But in liposome by saturated lecithin, cosurfactants had negative effect and appropriate amount of oil should be used to be stable. These results indicated that unsaturated lecithin were more suitable than saturated lecithin to prepare nano-liposome.

• Journal of Adhesion and Interface
• /
• v.12 no.2
• /
• pp.73-80
• /
• 2011

In order to develop the environmental-friendly new materials based on soybean protein which is plantable macromolecule, thermal characteristics of the soybean protein resin (SPI) modified by plasticizers (1,3-propandiol, glycerol) and cross linking agents (glutaraldehyde, epichlorohydrin, glyoxal, urea) were analyzed by TGA. Mechanical properties of modified SPI were investigated and fracture was observed by SEM. As the result, flexibility of SPI film was increased by adding plasticizers; 1,3-propandiol and glycerol. Plasticization effect of glycerol was relatively greater than that of 1,3-propandiol. With the application of crosslinking agents (glycerol, epichlorohydrin and glyoxal), strength and thermal stability of SPI increased with their content. On the other hand, in case of addition of urea, thermal stability of SPI decreased and its strength was reduced because cross-linking between urea and SPI was somewhat difficult. Fracture surfaces and domain interfaces of the modified SPI resins were observed with SEM.