• Bulletin of the Korean Chemical Society
• /
• v.25 no.8
• /
• pp.1137-1142
• /
• 2004

A spectrophotometric and first derivative spectrophotometric method was developed in aquatic Tween 80 micellar solutions for selective determination of nickel without using any pre-separation step. 1-(2-Pyridylazo)-2-naphthol (PAN), as a sensitive chromogenic complexing agent formed a red-colored Ni(II)-PAN complex in Tween 80 media with satisfactory solubility and stability. Conditions such as pH, PAN concentration, type and concentration of micellizing agent were optimized. Molar absorptivity of Ni-PAN complex was found $4.62\;{\times}\;10^4L\;cm^{?1}\;mol^{?1}$ at 569 nm, under the optimum condition. Calibration graphs were derived by zero, first and second derivative spectrophotometry at maximum wavelengths of 569, 578 and 571 nm with linear ranges of 30-1800, 20-2500 and 30-2000 ng $mL^{?1}$ , respectively. Precision as standard deviation as well as accuracy as recovery percent were in the range of 1-20 ng $mL^{?1}$, and 93.3-103.3%, respectively, for the entire of the linear ranges. Spectrophotometric detection limit was 3 ng $mL^{?1}$ and effects of diverse ions on the first derivative determination of nickel were studied to investigate selectivity of the method. Interferences of cobalt and copper on the nickel determination were prevented using o-phenanthroline as masking agent. The recommended procedures were applied to the various synthetic and stainless steel alloys, tea leaves and human hair, with satisfactory results.

• Textile Coloration and Finishing
• /
• v.17 no.6 s.85
• /
• pp.27-35
• /
• 2005

Conventional pad- dry-cure(thermo-fixation) process usually produces functional performance on both sides of a fabric. UV curing technique was applied to impart water- and oil-repellent finish effective only on the face of a PET knitted fabric. The preferential one-side coating, by virtue of the limited penetration of UV light, was achieved by W curing after padding of a fluorocarbon agent without special coating or printing equipments. The difference in the functional property of face and back sides was examined by measuring water and oil repellency at each side of the treated fabric. The influence of pre/post-irradiation dose and agent concentration on the performance of the finished fabrics were investigated. While increase in both resin concentration and post-irradiation did not have significant effect on the finish, UV pre-irradiation of PET fabrics caused remarkable influence presumably due to appropriate surface modification of PET fabrics required for facile wetting of the resin. The dimensional stability and color change of the UV cured fabrics measured by FAST and reflectance spectrophotometry showed significantly decreased color difference and increased percent extension compared with the samples pre-irradiated without agent application.

• Proceedings of the PSK Conference
• /
• 2002.10a
• /
• pp.252-252
• /
• 2002

Radiation synovectomy is an useful alternative treatment to rheumatoid arthritis and Re$\^$188/ is suggested as an ideal radiopharmaceutical agents because beta ray (2.1 MeV) emitted from Re$\^$188/ is appropriate for synovial cell ablation and gamma ray (155 KeV) is ideal for dosimetry. Its' ideal particle size (2-5 mm) was achieved by conjugation with tin-colloid, In this study, we investigated the toxicity, stability and biodistribution to evaluate the suitability of DA-7911 as a synovectomy agent. (omitted)

• Bulletin of the Korean Chemical Society
• /
• v.31 no.9
• /
• pp.2514-2518
• /
• 2010

A very simple synthetic route of a novel SATE prodrug type of 6'-fluoro-6'-methyl-5'-noradeonosine carbocyclic nucleoside phosphonic acid is described. The key fluorinated alcohol intermediate 7 was prepared from the epoxide intermediate 6a via selective ring-opening of epoxide. Coupling of 7 with $N^6$-bis-Boc-adenine under a Mitsunobu reaction followed by phosphonation and deprotection afforded the carbocyclic phosphonic acid. The chemical stability of the bis(SATE) derivative 13 was measured at neutral (pH 7.2) and slightly acidic (Milli-Q water, pH 5.5) pH. The antiviral activity test of the SATE prodrug 13 and its parent nucleoside phosphonic acid 11 were evaluated against HIV-1.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.11a
• /
• pp.67-70
• /
• 2005

Ultra high strength concrete, nowadays, has been widely applied to construction of high-rise building. To improve ductility and mechanical properties, steel fiber is employed in UHSC. This study investigates practical application of expansive additives(EA) and shrinkage reducing agent(SRA), in order to secure volumetric stability and improved mechanical properties, such as autogenous shrinkage and dry shrinkage of steel-fiber-reinforced-ultra-high-strength-comet-mortar(FHSM). According to the test, individual addition of steel fiber does not affect shrinkage reduction, as expected. However FHSM, with combined addition of 5$\%$ of EA and 1$\%$ of SRA decreased 60$\%$ of autogenous shrinkage. It is considered that Proper combination of EA and SRA can secure the shrinkage resistance of FHSM.

• Macromolecular Research
• /
• v.16 no.7
• /
• pp.596-603
• /
• 2008

To improve the mechanical properties, dimensional stability and blood compatibility, the biomedical material $Pellethene^{(R)}$ was blended with multiblock polyurethane (MPU) containing phospopholipid/long alkyl chain (C-18) at the various MPU contents and crosslinked using dicumyl peroxide as a crosslinking agent. The maximum MPU content for stable $Pellethene^{(R)}$/MPU blended films was approximately 30 wt%. The optimum crosslinking agent content and crosslinking time with respect to the mechanical properties were 4 wt% and 3 h, respectively. The mechanical properties (tensile strength and elongation at break) and water absorption of the crosslinked blend film increased with increasing MPU content. The test of platelet adhesion on the surfaces of the crosslinked blend film showed a decrease in the level of platelet adhesion from 70% to 6% with increasing MPU content from 0 to 30 wt%. These results suggest that the crosslinked $Pellethene^{(R)}$/MPU-30 (MPU content: 30 wt%) sample has strong potential as a novel material for blood compatible material applications.

• Journal of the Korean Society of Safety
• /
• v.18 no.3
• /
• pp.94-100
• /
• 2003

Gel-like compounds containing flammable solvents were prepared to use fur cleaning agents in field of innovative industries and general purposes. And experiments were conducted to improve the defects of liquified flammable solvents from the view point of safety and health hazards. Flammable solvents used in this study were several single component flammable solvents(turpentine oil, N-methyl-2-pyrrolidone(NMP), d-limonene) and multi component flammable solvent(gasoline and ethanol). For gelation of flammable solvents, commercially Known as Aerosil(equation omitted) 200 fumed silica and triethanolamine(TEA) were used as gelation agent dispersant. The analyses on properties of gel-like compounds was studied by gelation and viscosity test pH test, volatility test and differential scanning calorimetry(DSC) measurement. The experimental results indicate that gel-like compounds containing flammable solvents have pH stability, high viscosity, volatile organic compounds(VOC) control by the decrease of volatility and odor component generation, fluidity control etc. From the experimental values, it can be predicted that the safety in the working place is improved by manufacturing flammable solvents into gel-like compounds.

• International Journal of Internet, Broadcasting and Communication
• /
• v.16 no.2
• /
• pp.161-168
• /
• 2024

As the size of big data models grows, distributed training is emerging as an essential element for large-scale machine learning tasks. In this paper, we propose ParamHub for distributed data training. During the training process, this agent utilizes the provided data to adjust various conditions of the model's parameters, such as the model structure, learning algorithm, hyperparameters, and bias, aiming to minimize the error between the model's predictions and the actual values. Furthermore, it operates autonomously, collecting and updating data in a distributed environment, thereby reducing the burden of load balancing that occurs in a centralized system. And Through communication between agents, resource management and learning processes can be coordinated, enabling efficient management of distributed data and resources. This approach enhances the scalability and stability of distributed machine learning systems while providing flexibility to be applied in various learning environments.

• Biomolecules & Therapeutics
• /
• v.22 no.4
• /
• pp.321-327
• /
• 2014

Collagen pentapeptide (Lys-Thr-Thr-Lys-Ser, KTTKS) and its palmitoylated derivative (pal-KTTKS) have received a great deal of attention as cosmeceutical ingredients for their anti-wrinkle effects. The objective of this study was to evaluate stability and permeability of KTTKS and pal-KTTKS in hairless mouse skin. In this study, a liquid chromatography-tandem mass spectrometric method was developed for the quantification of pal-KTTKS, and used for stability and permeability studies. Stability studies were performed using skin extracts and homogenates. Both KTTKS and pal-KTTKS were rapidly degraded, but pal-KTTKS was more stable than KTTKS. When protease inhibitors were added, the stability of both compounds (KTTKS and pal-KTTKS) improved significantly. In the skin permeation study, neither KTTKS nor pal-KTTKS was detected in the receptor solution, which indicates that neither compound could permeate through the full-thickness hairless mouse skin in the experimental conditions of this study. While KTTKS was not detected in any of the skin layers (the stratum corneum, epidermis, and dermis), pal-KTTKS was observed in all skin layers: $4.2{\pm}0.7{\mu}g/cm^2$ in the stratum corneum, $2.8{\pm}0.5{\mu}g/cm^2$ in the epidermis, and $0.3{\pm}0.1{\mu}g/cm^2$ in the dermis. In conclusion, this study indicated that pal-KTTKS had greater stability and permeability than that of un-modified KTTKS, and may be a useful anti-wrinkle and anti-aging cosmeceutical agent.

• Journal of Pharmaceutical Investigation
• /
• v.32 no.1
• /
• pp.13-19
• /
• 2002

Water-lipid soluble multivitamin formulations were widely used to reduce the disease and stress of animals as husbandry has made a remarkable progress in recent. But the efficiency of these formulations is far from satisfactory. So, this study was attempted to develop the physically and chemically stable and useful multivitamin o/w emulsion. Multivitamin o/w emulsion composed of water, soybean oil (10%, v/v), vitamin A, D, E, K, $B_2,\;B_6,\;B_{12}$ and panthenol. To make a stable o/w emulsion, the egg lecithin (2%, w/v) and glycerin (2.5%, w/v) were used for emulsifier and thickening agent, respectively. The oil in water emulsion system was manufactured by microfluidizer and the physicochemical stability of this emulsion was evaluated. The average particle size and interfacial tension were measured. From the result of interfacial tension tested, critical micelle concentration of the egg lecithin was 0.5% (w/v) and optimal concentration for the preparation of emulsion was 2% (w/v). The mean particle size was about $0.6\;{\mu}m$ which was suitable for injections. Short-term accelerated stability as physical stability study was tested by centrifuging and freeze-thawing the emulsion samples. The additions of vitamins resulted in the increment of particle size and reduction of physical stability of emulsion. But it is not an enormous problem for the stability of emulsion. Also, we have performed the long-period preservation stability test for the vitamins. All vitamins were analysed by HPLC. The result of storage under $4^{\circ}C$ and dark conditions demonstrated that all vitamins were maintained stable at least 16 weeks, except for vitamin $B_{12}$.