• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.5
• /
• pp.552-558
• /
• 2016

A control rod drive mechanism(CRDM) is a reactor regulating system, which inserts, withdraws or maintains a control rod within a reactor core to control the reactivity of the core. The CRDM for Jordan Research and Training Reactor with 5MW power has been designed and fabricated based on the HANARO’s experience through KAERI and DAEWOO consortium. This paper describes the seismic test results to demonstrate the operability, the drop performance and the structural integrity of CRDM during or after seismic excitations. The seismic tests are carried out under 5 OBE and 1 SSE loads at three Test Rigs simulating the reactor structure and the pool top. From the tests, the CRDM is smoothly driven without a malfunction of stepping motor under OBE load. The pure drop time under OBE and SSE loads is measured as 1.169s and 1.855s to meet the design requirement. Also, it is found that the CRDM maintains the structural integrity without a change of the function and natural frequency before and after seismic loads.

• Earthquakes and Structures
• /
• v.8 no.3
• /
• pp.779-799
• /
• 2015

The slosh height and the possibility of water spill from rectangular Spent Fuel Storage Bays (SFSB) and Tray Loading Bays (TLB) of Nuclear power plant (NPP) are studied during 0.2 g, Safe Shutdown Earthquake (SSE) level of earthquake. The slosh height obtained through Computational Fluid dynamics (CFD) is compared the values given by TID-7024 (Housner 1963) and American concrete institute (ACI) seismic codes. An equivalent amplitude method is used to compute the slosh height through CFD. Numerically computed slosh height for first mode of vibration is found to be in agreement the codal values. The combined effect in longitudinal and lateral directions are studied separately, and found that the slosh height is increased by 24.3% and 38.9% along length and width directions respectively. There is no liquid spillage under SSE level of earthquake data in SFSB and TLB at convective level and at free surface acceleration data. Since seismic design codes do not have guidelines for combined excitations and effect of higher modes for irregular geometries, this CFD procedure can be opted for any geometries to study effect of higher modes and combined three directional excitations.

• Journal of Construction Engineering and Project Management
• /
• v.2 no.3
• /
• pp.17-29
• /
• 2012

Delays are one of the biggest problems facing by the construction industry and they have significant financial and social impact in construction projects. The paper presents a framework of Delay Analysis System (DAS) with the aim of analysing the impact of delay factors in Libyan construction projects. The system has designed by integrating the possible delay factors, critical activities of a project using@risk simulator. A case study of building project was demonstrated to identify the impact of delays and the sensitivity of delay factor. The case study result showed that the project might be delayed by 97 to 103 days in comparison to the planned duration. The developed DAS is a tool for analysing and identify the impacts of delay factors and assist to construction manager to take necessary measure in reducing the delay impact. The paper provides a methodology for analysing the possible delay impact in a construction project and informing to construction manager in advance of the possible delay factors.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.6
• /
• pp.982-989
• /
• 2010

This paper shows accuracy comparison results of reliability estimation methods for one-shot systems such as ammunitions. Quantal-response data, following a binomial distribution at each sampling time, characterizes lifetimes of one-shot systems. Various quantal-response data of different sample sizes are simulated using lifetime data randomly sampled from assumed weibull distributions with different shape parameters but the identical scale parameter in this paper. Then, reliability estimation methods in open literature are applied to the simulated quantal-response data to estimate true reliability over time. Rankings in estimation accuracy for different sample sizes are determined using t-test of SSE. Furthermore, MSE at each time, including both bias and variance of estimated reliability metrics for each method are analyzed to investigate how much both bias and variance contribute the SSE. From the MSE analysis, MSE provides reliability estimation trend for each method. Parametric estimation method provides more accurate reliability estimation results than the other methods for most of sample sizes.

• Korean Journal of Occupational Health Nursing
• /
• v.7 no.1
• /
• pp.83-96
• /
• 1998

The study was conducted to analyze employees' and employers' awareness of occupational health programs for the purpose of evaluating the effectiveness of the program employed in small-scale enterprises (SSE). The 400 SSE that have under 50 employees and have been supported by the Government were selected for mail survey, and 120 employers and 318 employees of 183 factories returned the questionnaires. The results are as follows; 1) 33.8% of employees were not aware of the fact that their factories have been supported by Government, and 69.1% of employees did not know who was the monitor of that program. Only 147% of employees and 35.5% of employers agreed that the supported program reflected their opinions well. 2) 45.1% of employees participated in health education classes more than once. But only 15.6% of them considered the classes as very helpful. 21.1% of employers were much aware of health education schedule, and 44.2% reported that it was helpful for the prevention of occupational diseases. 3) 68.8% of employers were aware of the possibility of occupational diseases that could occur in their factories. And 36.5% of employers reported that some criteria were used for job reallocation to their employees. But only 9.7% of employees were assigned new job based on the result of health status examination. 4) 65.6% of employees were aware of the periodic evaluation for work environment, and 43.3% knew the evaluation results. Among participated SSE, 5.9% have a planning department for improving work environment, and 46.2% actually carried out the program for improving work environment. The findings showed that the employers and employees of SSE had insufficient knowledge of the occupational health program that have been employed in their workplace. It is essential to lead more active participation of employers and employees in their occupational health programs so as that the programs are to improve their health status as well as work environment more effectively.

• The Korean Journal of Emergency Medical Services
• /
• v.18 no.2
• /
• pp.7-20
• /
• 2014

Purpose: This study aims to assess the reliability and validity of a Korean version of the satisfaction with simulation experience (SSE) scale for low-, medium-, and high-fidelity simulations among paramedic students. Methods: Exploratory factor analysis with varimax rotation was used to determine construct validity. Cronbach's alpha was calculated to assess internal consistency reliability. Results: Cronbach's alpha for the overall scale was .841. Exploratory factor analysis yielded a three-factor structure composed of clinical learning, clinical reasoning and debriefing and reflection. Each of the subscales had high internal consistency, with Cronbach's alphas of .852, .790 and .913, respectively. With respect to year, freshmen scored the highest on the SSE scale. With respect to type of simulation, the medium-fidelity group reported the highest satisfaction. Generally, the students were satisfied with debriefing and reflection. Conclusion: The Korean version of the SSE scale was shown to be a reliable and valid instrument for assessing satisfaction with simulation learning in paramedic students.

• Journal of the Korean Chemical Society
• /
• v.62 no.3
• /
• pp.191-202
• /
• 2018

The aim of this work is to study Monte Carlo simulation of ethylene (co)polymerization over Ziegler-Natta catalyst as investigated by Chen et al. The results revealed that the Monte Carlo simulation was similar to sum square error (SSE) model to prediction of stage II and III of polymerization. In the case of activation stage (stage I) both model had slightly deviation from experimental results. The modeling results demonstrated that in homopolymerization, SSE was superior to predict polymerization rate in current stage while for copolymerization, Monte Carlo had preferable prediction. The Monte Carlo simulation approved the SSE results to determine role of each site in total polymerization rate and revealed that homopolymerization rate changed from site to site and order of center was different compared to copolymerization. The polymer yield was reduced by addition of hydrogen amount however there was no specific effect on uptake curve which was predicted by Monte Carlo simulation with good accuracy. In the case of copolymerization it was evolved that monomer chain length and monomer concentration influenced the rate of polymerization as rate of polymerization reduced from 1-hexene to 1-octene and increased when monomer concentration proliferate.

• Korean Journal of Food Science and Technology
• /
• v.43 no.6
• /
• pp.723-728
• /
• 2011

This study was performed to test the effect of Sargassum sagamianum extract (SSE) on shelf-life and improved quality in bread with 0.25, 0.5 and 0.75% added SSE. Bread with added SSE had reduced total microbial counts by 2 log cycles and mold cell counts by 3 log cycles. No changes in moisture content or pH occurred from days 3 to 9. In addition, bread with SSE had a lower yield of malonaldehyde than that of the control as shown by the TBARS assay. Yellowness increased in bread with added SSE, whereas lightness and redness decreased. In the sensory evaluation, taste, total preference, inner shape, and color of the bread containing 0.25 and 0.5% SSE were preferred. These results suggest that the adding 0.25 and 0.5% SSE to bread improved shelf-life and quality.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.10a
• /
• pp.294-295
• /
• 2005

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.111-112
• /
• 2007

본 논문에서는 멀티프로세서 기반의 고속 영상처리 알고리즘 개발방법에 대해 소개한다. 영상획득 방식의 발전과 더불어 고해상도 영상의 획득이 가능해지고 영상이 컬러화가 되면서 많은 영상처리 응용분야에서 알고리즘 고속화를 필요로 하고 있다. 이러한 수요를 만족시키기 위해서는 최근에 출시되고 있는 멀티프로세서를 최대한 활용할 수 있는 알고리즘 개발이 최우선이다. 본 논문에서는 OpenMP, MIL(Matrox Image Library), OpenCV, IPP(Integrated Performance Primitives), SSE (Streaming SIMD (Single Instruction Multiple Data) Extensions)등 병렬처리와 고속 영상처리 라이브러리를 이용한 알고리즘 개발방법에 대해 소개하고, 각 개발방법에 따른 알고리즘 성능을 분석 및 평가하였다. 실험결과로부터 SSE와 IPP, MIL(Thread)을 이용하여 Mean, Dilation, Erosion, Open, Closing, Sobel등 알고리즘을 구현하여 $4057{\times}4048$크기의 영상에 적용하였을 때 $7{\sim}35msec$의 좋은 성능을 나타내어 기타 방식보다 우수함을 알 수 있었다.