• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.248-251
• /
• 1999

The microwave dielectric properties of The Dielectric Properties of $Ba_{1-x}$A$_{x}$(Mg$_{1}$3/Nb$_{2}$3/)O$_3$ (A = Sr, Ca, x = 0, 0.2 ,0.4 ,0.6, 0.8, 1.0) were investigated. In composition of $Ba_{1-x}$A$_{x}$(Mg$_{1}$3/Nb$_{2}$3/)O, densities are decreased with increasing x values. Grain sizes are decreased with Sr content and Increased with Ca content. The hexagonally ordered superstructure was observed in $Ba_{1-x}$Sr$_{x}$(Mg$_{1}$3/Nb$_{2}$3/)O$_3$(BSMN) systems, the intensity of superlattice increased with x value. In $Ba_{1-x}$Cr$_{x}$(Mg$_{1}$3/Nb$_{2}$3/)O$_3$(BSMN) systems, the additional diffraction patterns were shown. The highest value of $\varepsilon$$_{r}$ was shown in x=0.2 of BCMN systems and the value was 41.9. The highest Q$\times$f was shown in x=0.2 of BSMN systems and the value was 68,000. $\tau$$_{f}$ were shown 0 ppm/$^{\circ}C$ near x=0.8.TEX> near x=0.8.0.8.

• Journal of the Korean Ceramic Society
• /
• v.25 no.6
• /
• pp.639-644
• /
• 1988

The physical and dielectric properties of complex perovskite compound Sr(Mg1/3Nb1/3)O3-Ba(Mg1/3Nb2/3)O3-Ba(Mg1/3Ta2/3)O3(BMT) system were investigated as a function of composition. As the mole ratio of BMN was increased, lattice parameter ratio c/a was slightly increased, and density was increased in SMN-BMN system. However, in BMN-BMT system, lattice parameter ratio c/a and density were decreased with increasing the mole ratio of BMN. Dielectric constant, dielectric loss at $25^{\circ}C$ and 100kHz, and temperature coefficient of resonant frequency, the dependence of temperature in capacitance were increased with increasing the mole ratio of BMN in SMN-BMN-BMT system. These result can be explained according to the degree of order=disorder and dielectric constant.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1988.10a
• /
• pp.105-107
• /
• 1988

The dielectric properties of complex perovskite compound Sr$(Mg_{1/3}Mb_{2/3})$$O_3$-Ba$(Mg_{{1/3}Nb_{2/3})$$O_3$(BMN) system were investigated as a function of composition and sintering time. In the case of the specimens sintered at $1650^{\circ}C$ for same time, dielectric constant and dielectric loss were increased with increasing the mole ratio of BMN. The maximum temperature coefficient of resonant frequency was found in composition Ba$(Mg_{{1/3}Nb_{2/3})$$O_3$. In the case of the specimens with same composition, dielectric constant and dielectric loss were slightly increased with increasing the sintering time. As the sintering time was increased, the temperature coefficient of resonant frequency for SMN was slightly increased, however, that of BMN and ($Sr_{1/2}Ba_{1/2}$) ($Mg_{1/3}Ta_{2/3}$)$O_3$ was largely depended on sintering time.

• Journal of the Korean Ceramic Society
• /
• v.36 no.3
• /
• pp.325-331
• /
• 1999

SrWO4가 첨가된 (Sr1-xBax)(Mg1/3Nb2/3)O3의 마이크로파 유전특성에 관하여 조사하였다. 관찰된 조성영역에서 Sr(Mg1/3Nb2/3)O3과 Ba(Mg1/3Nb2/3)O3은 (Sr1-xBax)(Mg1/3Nb2/3)O3고용체를 형성하고 SrWO4의 첨가는 고용체의 소결성을 향상시켜 소결온도 155$0^{\circ}C$에서 상대밀도 97% 이상을 얻었다. 소결한 시편의 EDS분석결과, SrWO4의 첨가량이 많은 시편에서 2차상이 존재하는 것을 알수 있었다. 순수한 Sr(Mg1/3Nb2/3)O3에 SrWO4를 0.01 mole첨가하여 1550~1$600^{\circ}C$에서 소결한 시편의 유전특성은 $\varepsilon$r 30, Q$\times$fo$\geq$55000,$ au$f -23 ppm/$^{\circ}C$이었다. 0.01 mole SrWO4가 첨가된 (Sr1-xBax)(Mg1/3Nb2/3)O3 고용체의 유전율과 온도계숙가 x에 따라 점차적으로 계속 증가하였고 Q$\times$fo는 x$\leq$0.25에서 x에 따라 감소하고 x$\geq$0.3에서 다시 증가하였다. (Sr0.65Ba0.35)(Mg1/3Nb2/3)O3+0.01SrWO4의 조성을 갖는 시편에서 $\varepsilon$r 34.4, Q$\times$fo$\geq$55000,$\tau$f 0 ppm/$^{\circ}C$이었다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.6
• /
• pp.478-484
• /
• 2000

The structural changes and the microwave dielectric properties of $Ba_{1-x}$/A$_{x}$/(Mg$_{1}$3//Nb$_{2}$3/)O$_3$(A=Sr, Ca=x0, 0.2, 0.4, 0.6, 0.8, 1.0) were investigated. The densities of samples are gradually decreased with increasing x(BMN=6.1, SMN=5.22 and CMN=4.26 g/m$^3$)The crystal structure of BMN was untilting of oxygen octahedral. The structural changes of BSMN showed the antiphase tilting at x>0.4, and those of BCMN showed the antiphase tilting at 0.20.8. The variation of dielectric constant with Sr was small(BMN=32, SMN=30) However the variation with Ca was large the highest value was 42 at Ca=0.2(CMN=25) The maximum quality factor was 68,000 GHz at Sr=0.2 and the minimum quality factor was 3,000 GHz at Ca=0.2 (BMN=35,000, SMN=20,000 and CMN=23,000 GHz) The temperature coefficients of resonant frequency of BSMN were about 2 times larger than those of BCMN in all composition.ion.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.325-328
• /
• 1999

The physical and electrical properties of $\textrm{Ba}_1$ $_{x}\textrm{Sr}_{x}$($\textrm{Mg_{1/3}Nb_{2/3}}$)$\textrm{O}_3$ (x =0, 0.2, 0.4, 0.6, 0.8, 1.0) ceramics were investigated. The Bal $_{x}\textrm{Sr}_{x}$($\textrm{Mg_{1/3}Nb_{2/3}}$)$\textrm{O}_3$ systems were shown that the hexagonally ordered superlattices were increased with increasing x values. The relative densities of all samples were over 97% theoretical densities. The dc resistivities of samples were $10^{13}$ - $10^{14}$$\Omega\textrm{cm}$at room temperature, these values were nearly constant at 130(x=0)-$230^{\circ}C$ (x=l). However, the resistivities of samples decreased rapidly above those temperature and their activation energies were from 1.0 to 1.52 eV. The relative dielectric constant was 33(BMN) and 30.6(SMN) respectively. And the highest value was shown at x=0.4 and the value was 34.3. The temperature coefficient of dielectric constant was -61 ppm/$^{\circ}C$(BMN) and 79 ppm/$^{\circ}C$ (SMN) respectively.

• Journal of the Korean Ceramic Society
• /
• v.33 no.10
• /
• pp.1131-1137
• /
• 1996

The dielectric properties and phase stabilities of Pb(Zn0.6Mg0.4)1/3Nb2/3O3 [PZMN]system were investigated into substitution of A-site with Ba, Sr and Ca ions. The A-site substitutions led to the complexity of components of perovskite phase and then DPT coefficient increased. The A-site substitutions of Ba or Sr ion perovskite single phase could be easily formed by columbite process due to increase of perovskite phase stability. The variation of lattice parameters in specimen obeyed Vegard's law and curie temperature and dielectric constant of specimen decreased linearly. But Ca substitution led to perovskite phae instability. The lattice parameter dielectric constant and curie temperature of specimens drasticaly decreased with formation of pyrochlore phase.

• Journal of the Korean Ceramic Society
• /
• v.36 no.7
• /
• pp.762-766
• /
• 1999

The crystal structure of A2+(Mg1/3Nb2/3)O3,(A2+=Sr2+ and Ca2+)ceramics was studied usig X-ray diffraction (XRD) and high resolution transmission electrion microscopy(HRTEM). Ba(Mg1/3Nb2/3)O3 (SMN) has the 1:2 ordered monoclinic structure which has the anti-phase tilt of octahedra. The type of tilting in SMN was considered to be a$^{\circ}$a$^{\circ}$c- or a­a­c$^{\circ}$ Ca(Mg1/3Nb2/3)O3 (CMN) also has the 1:2 ordered monoclinic structure which was distorted by the anti-phase tilt or in-phsae tilt of octahedra. A unit cell containing both the in-phase tilt axis and anti-phase tilt axis was not observed in the CMN. Therefore CMN has the mixed phase consisting of the 1:2 ordered monoclinic phase with anti-phase tilt of octahedra and the one with in -phase tilt of ocatahedra,. The anti-parallel shift of cation was also observed in the CMN.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.251-254
• /
• 1998

The ($0.8BaTiO_3-0.1SrTiO_3-0.1MgTiO_3$)+$0.006Nb_2O_5$ ceramics were fabricated by conventional ceramic process. The dielectric property of specimen was investigated that the specimen was sintering temperature at 1,300C for 3hours and then annealed at $1,100^{\circ}C$ for 3hours in a atmosphere (air) to be painted on the surface with CuO paste. The results of the temperature and frequency are varied, the dielectric constant and loss tangent are unsuitable for BL capacitor. The dielectric constants were varied to be negative temperature coefficient(2.000-3,000) in the temperature range between -10 and $140^{\circ}C$, the dissipation factors (tan $\delta$) were some high(0.1-0.3). It was not grain insulation, in cause of the some difficult to be annealed temperature with CuO paste and fired atmosphere. But, we have some different annealing temperature and fired atmosphere, it will be suitable BL(Boundary Layer)capacitor.

• Journal of the Korean earth science society
• /
• v.27 no.1
• /
• pp.49-60
• /
• 2006

The purpose of this study is to investigate geochemical characteristics for stream sediments in the Naju area. We collected 139 stream sediments samples from primary channels. Samples were dried slowly in the laboratory and chemical analysis was carried out using XRF. ICP-AES and NAA. In order to investigate geochemical characteristics, the geological groups categorized into granitic gneiss area, schist area, granite area, arenaceous rock area, tuff area, andesite area, and rhyolite area. Average contents of major elements for geological groups are $SiO_2\;58.37{\sim}66.06wt.%,\;Al_2O_3\;13.98{\sim}18.41wt.%,\;Fe_2O_3\;4.09{\sim}6.10wt.%,\;CaO\;0.54{\sim}1.33wt.%,\;MgO\;0.86{\sim}1.34wt.%,\;K_2O\;2.38{\sim}4.01wt.%,\;Na_2O\;0.90{\sim}1.32wt.%,\;TiO_2\;0.82{\sim}1.03wt.%,\;MnO\;0.09{\sim}0.15wt.%,\;P_2O_5\;0.11{\sim}0.18wt.%$. According to the comparison of average contents of major elements, $Al_2O_3\;and\;K_2O$ are higher in granitic gneiss area, $Fe_2O_3,\;CaO,\;P_2O_5$ are higher in tuff area, MgO and $TiO_2$ are higher in andesite area, $Na_2O_$ is higher in rhyolite area, $SiO_2$, and MnO are higher in arenaceous rock area. Average contents of minor and rare earth elements for geological groups are $Ba\;1278{\sim}1469ppm,\;Be\;1.1{\sim}1.5ppm,\;Cu\;18{\sim}25ppm,\;Nb\;25{\sim}37ppm,\;Ni\;16{\sim}25ppm,\;Pb\;21{\sim}28ppm,\;Sr\;83{\sim}155ppm,\;V\;64{\sim}98ppm,\;Zr\;83{\sim}146ppm,\;Li\;32{\sim}45ppm,\;Co\;7.2{\sim}12.7ppm,\;Cr\;37{\sim}76ppm,\;Cs\;4.8{\sim}9.1ppm,\;Hf\;7.5{\sim}25ppm,\;Rb\;88{\sim}178ppm,\;Sc\;7.7{\sim}12.6ppm,\;Zn\;83{\sim}143ppm,\;Pa\;11.3{\sim}37ppm,\;Ce\;69{\sim}206ppm,\;Eu\;1.1{\sim}1.5ppm,\;Yb\;1.8{\sim}4.4ppm$. According to the comparison of average contents of minor and rare earth elements for geological groups, Pb, Li, Cs, Hf, Rb, Sb, Pa, Ce, Eu, and Yb are higher in granitic gneiss area; Ba, Co, and Cr in schist area; Nb, Ni, and Zr in arenaceous rock area; Sr in tuff area: and Be, Cu, V, Sc, and Zn are such in andesite area.