• Journal of Korea Multimedia Society
• /
• v.6 no.3
• /
• pp.462-468
• /
• 2003

In a speech coding system using excitation source of voiced and unvoiced, it would be involved a distortion of speech quality in case coexist with a voiced and an unvoiced consonants in a frame. So, I propose TSIUVC(Transition Segment Including Unvoiced Consonant) searching and extraction method in order to uncoexistent with a voiced and unvoiced consonants in a frame. This paper present a new method of TSIUVC approximate-synthesis by using Least Mean Square and frequency band division. As a result, this method obtain a high quality approximation-synthesis waveforms within TSIUVC by using frequency information of 0.547KHz below and 2.813KHz above. The important thing is that the maximum error signal can be made with low distortion approximation-synthesis waveform within TSIUVC. This method has the capability of being applied to a new speech coding of Voiced/Silence/TSIUVC, speech analysis and speech synthesis.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.2
• /
• pp.182-188
• /
• 2014

Source localization is an important problem in the field of sonar and radar, etc. For the purpose of source localization, two or more spatially separated sensors are often used to measure the time difference of arrivals of a radiating source whose transmitted signal waveform is unknown. The NLS(Nonlinear Least Square) cost function with curve fitting method was proposed recently, which provide robust source localization performance by reducing estimation ambiguity. However, even this algorithm shows degraded performance in a multipath environment. To estimates source localization correctly, source localization algorithm that eliminate the effect of multipath signals is required. In this paper, PMP(Power Matching Procedure) is added to the algorithm, which provides improved source localization performance by properly cutting out the effect of multipath signals. Through simulation the performance of the proposed source localization algorithm is verified.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.686_687
• /
• 2009

The traceability maintenance system for the AC voltage and current has been developed at the frequency range of 20 Hz to 100 Hz without using any compensation technique which is used at thermal converter (TC) ac-dc transfer system at low frequencies. The system uses a digital voltmeter (DVM) as a data acquisition system of the input waveform and stored data in memory. The developed algorithm acquires and processes the sampling data to calculate the root mean square (rms) value of the input voltage of DVM which operates at DC 10 V range for better accuracy. The best uncertainty of the AC voltage measurements is $3 {\mu}V/V$ within the frequency range. The best uncertainty of the AC current measurements is better than the $5 {\mu}A/A$ and mainly depend on the current to voltage converter, ac-dc current shunt or Current Transformer (CT), used for the measurement

• Journal of Biomedical Engineering Research
• /
• v.26 no.2
• /
• pp.87-93
• /
• 2005

A new method for real-time estimating left ventricular relaxation time constant (T) from the left ventricular (LV) pressure waveform, based on the isovolumic relaxation model, is proposed. The presented method uses a recursive least squares (RLS) algorithm to accomplish real-time estimation. A new criterion to detect the end-point of the isovolumic relaxation period (IRP) for the estimation of T is also introduced, which is based on the pattern analysis of mean square errors between the original and reconstructed pressure waveforms. We have verified the performance of the new method in over 4,600 beats obtained from 70 patients. The results demonstrate that the proposed method provides more stable and reliable estimation of τ than the conventional 'off-line' methods.

• Proceedings of the KOSOMBE Conference
• /
• v.1995 no.11
• /
• pp.265-268
• /
• 1995

Signal averaging technique to improve signal-to-noise ratio has widely been used in various fields, especially in electrophysiology. Estimation of the EP(evoked potential) signal using the conventional averaging method fails to correctly reconstruct the original signal under EEG(electroencephalogram) noise especial]y when the latency times of the evoked potential are not identical. Therefore, a technique based on the bispectrum averaging was proposed for recovering signal waveform from a set o noisy signals with variable signal dalay. In this paper an improved bispectrum estimation technique of the RP signal is proposed using a confidence thresholding of the EP signal in frequency domain in which energy distribution of the EP signal is usually not uniform. The suggested technique is coupled with the conventional bispectrum estimation technique such as least square method and recursive method. Some results with simulated data and real EP signal are shown.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.3
• /
• pp.95-100
• /
• 2006

The pulse compression technique using Linear FM signal is commonly used for improving the performance of both the detection range and range resolution in radar system. In general, the compressed LFM waveform has relatively large sidelobe level which may prevent a target from being detected when strong jammer or clutter signal is near the target signal. In this paper, we propose a new weighting method which uses the square-root weight to suppress the sidelobe level. Typical applications are missile seekers and tracking radar systems where target tracking range is available prior to the signal processing. By computer simulation, we show that the performance of the proposed method is better than that of the conventional weighting methods in terms of sidelobe suppression.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.16 no.6
• /
• pp.31-39
• /
• 1979

This paper dealt with a general the Qrem of frequency doubler. By summarizing the frequency doubler theorems, a new frequency doubter theorem can be derived. "In time invarient system, if the input waveform shows the half-wave symmetric characteristic and if the even function is the mapping from input into output, then the frequency of output is at least 2-times of input frequency." By the theorem, this paper propose a new wide band square wave frequency doublerusing negative resistance circuit.e circuit.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.133-136
• /
• 2002

EEG(Electroencephalography) is generated by electrical activity between neurons in cortical. Waveform of EEG is changed according to body and mental states. Therefore EEG is used to diagnosis of encephalophyma and epilepsy, etc. Also EEG is used to HCI(Human-Computer Interface). This paper describes estimation of orientation and location of dipole sources. The forward model is three-layer spherical head model and current dipole model. Using analytical solution, EEG is generated. Using MNLS(Minimum-Norm Least-Square) method, orientation and location of dipole moment is estimated.

• Journal of Magnetics
• /
• v.21 no.1
• /
• pp.78-82
• /
• 2016

Cogging torque will affect the performance of a permanent magnet Brushless DC Motor (BLDCM), thus the reduction of cogging torque is key for BLDCM optimization. In this paper, the phase shifting of cogging torque for a fractional-slot concentrated winding BLDCM is analyzed using the Maxwell tensor method. Moreover, a 9-slot 10-pole concentrated winding BLDCM driven by ideal square waveform is studied with the finite element method (FEM). An effective method to reduce the cogging torque is obtained by adjusting the slot opening. In addition, the influences of different slot openings on back electromotive force (back-EMF), air gap flux density and flux linkage are investigated and experimentally validated using the prototype BLDCM.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.1
• /
• pp.111-118
• /
• 2013

This paper presents implementation of Air protocol analyzer and physical layer design algorithm. The analyzer is a measurement system providing real-time analysis of wireless signals between User Equipment (UE) and Node-B. The implemented system proposed in this paper consists of Digital Signal Processors (DSPs) and Field Programmable Gate Arrays (FPGAs). The waveform of Wideband Code Division Multiple Access (WCDMA) has been selected for verification of the proposed system. We designed the analyzer using equalizer algorithm and rake-receiver algorithm. Among various algorithms of designing the equalizer, we have chosen Linear Minimum Mean Square Error (LMMSE) equalizer that uses the inverse of channel matrix. Since the LMMSE equalizer uses the inverse channel matrix, it suffers from a large amount of computational load, while it outperforms most conventional equalizers. In this paper, we introduce an efficient procedure of reducing the computational load required by LMMSE equalizer-based receiver.