• 한국음향학회지
• /
• 제21권2호
• /
• pp.150-159
• /
• 2002

광대역 소음저감을 위한 압전지능패널에 대한 실험적 연구를 수행하였다. 압전지능패널은 기본적으로 압전재료를 부착한 평판구조물에 션트회로를 연결하고 흡음재들을 부가한 구조물이다. 압전감쇠와 수동적 특성을 혼용하여 중 주파수영역에서 흡음재의 수동적 특성을 이용하고 저주파수 영역의 공진주파수에서는 압전감쇠를 적용하여 소음저감시키는 개념이다. 저주파수 공진에서의 소음저감을 위하여 측정한 전기적 임피던스 모델을 이용하는 압전감쇠를 적용하였다. 압전감쇠를 위한 공진 션트회로는 직렬로 연결된 저항과 인덕터로 구성되었으며, 저항과 인덕터는 회로에서 소산되는 에너지가 최대가 될 수 있는 값으로 최적설계하였다. 압전지능패널의 전달소음저감 성능은 음향터널을 사용하여 실험을 수행하였다. 음향터널은 사각단면 형태이며 소음원으로 터널의 한 쪽 끝에 스피커가 설치되었다. 패널들을 터널의 중앙에 설치하여 투과 음압을 측정하였다. 흡음재와 공기층을 갖는 압전이중지능패널은 수동적 특성에 의해 저주파수 영역의 공진주파수를 제외한 중주파수 영역에서 뚜렷한 소음저감 효과를 나타내었다. 압전감쇠를 통하여, 공진주파수에서의 좋은 소음저감을 얻었다. 압전감쇠와 수동적 방법을 혼용하는 압전지능 패널은 넓은 주파수 영역에서의 소음저감을 위한 유망한 기술이다.

• 멤브레인
• /
• 제6권2호
• /
• pp.86-95
• /
• 1996

본 연구에서는1축 회전판형 한외여과막 모듈의 순수 투과율 예측모델과 기름 에멀션의 분리 특성 및 투과율 예측모델을 유도하였다. 1축 RDM은 한외여과막(UOP사, 직경 0.22m)으로 제작된 회전판막을 장착하여 $25^{\circ}C$에서 압력, 각속도($\omega$), 농도 변화에 따라 분리특성을 조사하였다. 회전판막의 각속도가 0에서 52.36rad/s로 증가할수록 회전판내 유체가 받는 원심력에 의한 압력 강하와 분리막 표면의 미끄럼 흐름에 의한 압력 강하로 순수 투과율은 최대 각속도에서 3.9% 감소하였다. 원심력과 미끄럼 흐름에 의한 압력 강하는 선속도(${\omega}r$)의 자승에 비례하였다. 회전판의 각속도가 52.36에서 2.62rad/s로 감소할 때 5% 절삭유의 투과율은 30.16% 감소하였고 농도가 낮을수록 막회전과 투과율에 미치는 영향은 적었다. 절삭유의 투과율(J; $kg/m^{2} \cdot s$)은 회전에 의한 압력 강하를 고려한 유효압력차($\Delta P_{T}$ ; Pa), 벌크농도($C_{B}$; %), 선속도($\omega$r; m/s) 등에 영향을 받으며 실험 결과에 저항 모델을 적용하여 다음과 같은 식을 유도하였다.

• 한국지반공학회논문집
• /
• 제32권12호
• /
• pp.23-32
• /
• 2016

본 연구에서는 각종 구조물 철거 시 발생하는 폐콘크리트를 파쇄 처리하여 발생한 순환골재를 각종 토공 및 보조기 층용에 재활용 시 발생할 수 있는 하중-변위 및 파쇄 특성을 분석하기 위해 단입자 파쇄실험을 실시하였다. 수화물과 골재로 구성된 75mm 이하의 순환골재를 40mm 크기(75-40mm 사이)와 20mm 크기(40-20mm 사이)의 골재로 나누어 실험하였다. 순환골재에 하중이 증가할 경우 단입자의 파쇄 거동은 불규칙한 표면이 가압판에 밀착되면서 초기에 표면이 파쇄되는 '표면파쇄(Surface crushing)', 표면파쇄 이후 골재와 수화물이 분리되는 소규모 부분적 파쇄와 균열이 반복적으로 발생하는 '수화물파쇄(Hydrate crushing)', 수화물파쇄가 단계적으로 반복되다가 최대하중에서 골재가 파쇄되면서 하중이 급격히 감소되는 취성파괴인 '골재파쇄(Aggregate crushing)'의 순서로 파쇄 사이클(crushing cycle)이 진행되었다. 한편, 하중이 지속적으로 증가함에 따라 이러한 파쇄 사이클은 수 차례 반복되는 경향을 보였다. 순환골재의 형상은 둥글거나 사각형에 가깝거나, 삼각형 또는 길쭉한 형태로 표면상태나 형상에 따라 파쇄 형상이 다르게 나타났다. 골재파쇄(최대 파쇄)에서 취성파괴로 하중이 감소되는 비율인 파쇄하중 감소율은 50% 이상인 경우는 63% 정도이며, 90% 이상인 경우도 15% 정도로 나타났다. 40mm 단입자는 최대하중 3.05~4.38kN 정도에서 대부분 파쇄되어 작은 입자로 분리되며, 세립화된 단입자 개수를 기준으로 20mm 이하의 분포비율은 약 70% 정도였다.

• 대한기계학회논문집A
• /
• 제41권5호
• /
• pp.361-366
• /
• 2017

컴퓨팅 아키텍처와 응용 소프트웨어 기술의 발달로 최근에는 근사가 아닌 실제 물리계 모사라는 컴퓨터 시뮬레이션의 궁극 목표가 현실 이슈로 대두되고 있다. 본 논문에서는 미국 정부 주도 슈퍼컴퓨팅 기반 다물리 시뮬레이션 사업의 결과물로 나온 일리노이 대학의 일리노이 록스타라는 유체-구조-연소 연성 해석툴을 활용하여 충격파관 내의 금속판의 미소 시간 운동을 전산모사하고 기존 실험, 해석들과 비교하는 연구를 수행하였다. 전산유동해석은 정렬격자를 기반으로 하였고 구조해석은 대변형 선형탄성을 가정하였다. 또한 강한 연계 시간적분법이 적용된 알고리즘의 고도화로 인해 충격파 내 금속패널에 관한 높은 수준의 실험-계산 상관성을 보였다. 본 연구의 제한적인 검증연구를 확장하여 해석환경 내 추가 모듈들의 검증작업들과 코드개선을 통해 오픈소스 기반 연구개발 도구로서 활용할 예정이다.

• Archives of Plastic Surgery
• /
• 제33권2호
• /
• pp.219-224
• /
• 2006

Augmentation rhinoplasty is one of the most popular aesthetic procedure in Asians. Numerous alloplastic implants have been used until now, but no accurate comparative analysis about the implant materials has been reported yet. This study in animal model was designed to determine the safety and effectiveness of various implant materials in augmentation rhinoplasty. The $15{\times}15{\times}2mm$ sized square shaped plate of $Gore-Tex^{(R)}$, silicone rubber, and $15{\times}15{\times}1.5mm$ sized $Medpor^{(R)}$ were implanted under panniculus carnosus of the abdomen wall of rat. And tissue specimens including the implant and surrounding soft tissue were obtained by en bloc excision in 6 months after implantation. The implants were estimated in weight and volume, and also the specimens were examined grossly and microscopically. The results revealed that increase of average weight 26.9%, decrease of average volume 55.4% in $Gore-Tex^{(R)}$ implant, increase of each average weight and volume 62.6%, 8.7% in $Medpor^{(R)}$ implant and very slight increase of both average weight and volume 4.7%, 1.1% in silicone rubber implant. Grossly, the $Gore-Tex^{(R)}$ was deformed, $Medpor^{(R)}$ was strongly adherent to surrounding soft tissue and the silicone rubber was well encapsulated and easily peeled off. Microscopically, silicone rubber showed foreign body reaction slightly and there were no inflammatory responses in all alloplastic implants. In our study, silicone rubber showed very proper alloplastic features for augmentation rhinoplasty due to causing no inflammatory response, no physical change, and no deformity.

• International Journal of Fluid Machinery and Systems
• /
• 제10권1호
• /
• pp.40-46
• /
• 2017

Small valves including ball valves, gate valves and butterfly valves have been adopted in the fields of steam power generation, petrochemical industry, carriers, and oil tankers. Butterfly valves have normally been applied to fields where in narrow places installing the existing valves such as gate valves and ball valves have proven difficult due to the surrounding area and the heavier of these valves. Butterfly valves are used to control the mass flow of the piping system under low pressure by rotating the circular disk installed inside. The butterfly valve is benefitted by having simpler structure in which the flow is controlled by rotating the disc circular plate along the center axis, whereas the weight of the valve is light compared to the gate valve and ball valve above-mentioned, as there is no additional bracket supporting the valve body. The manufacturing company needs to acquire the performance and life test equipment, in the case of adopting the improving factors to detect leakage and damage on the seat of the valve disc. However, small companies, which are manufacturing the industrial valves, normally sell their products without the life test, which is the reliability test and environment test, because of financial and manpower problems. Furthermore, the failure mode analysis of the products failed in the field is likewise problematic as there is no system collecting the failure data on sites for analyzing the failures of valves. The analyzing and researching process is not arranged systematically because of the financial problem. Therefore this study firstly tried to obtain information about the failure data from the sites, analyzed the failure mode based on the field data collected from the customers, and then obtained field data using measuring equipment. Secondly, we designed and manufactured the performance and life test equipment which also have the real time monitoring system with the naked eye for the butterfly valves. The concept of this equipment can also be adopted by other valves, such as the ball valve, gate valve, and various others. It can be applied to variously sized valves, ranging from 25 mm to large sized valves exceeding 3000 mm. Finally, this study carries out the life test with square wave pressure, using performance and life test equipment. The performance found out that the failures from the real time monitoring system were good. The results of this study can be expanded to the other valves like ball valves, gate valves, and control valves to find out the failure mode using the real time monitoring system for durability and performance tests.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.81.2-81.2
• /
• 2012

To fabricate a metal mold for injection molding, hot-embossing and imprinting process, mechanical machining, electro discharge machining (EDM), electrochemical machining (ECM), laser process and wet etching ($FeCl_3$ process) have been widely used. However it is hard to get precise structure with these processes. Electrochemical etching has been also employed to fabricate a micro structure in metal mold. A through mask electrochemical micro machining (TMEMM) is one of the electrochemical etching processes which can obtain finely precise structure. In this process, many parameters such as current density, process time, temperature of electrolyte and distance between electrodes should be controlled. Therefore, it is difficult to predict the result because it has low reliability and reproducibility. To improve it, we investigated this process numerically and experimentally. To search the relation between processing parameters and the results, we used finite element simulation and the commercial finite element method (FEM) software ANSYS was used to analyze the electric field. In this study, it was supposed that the anodic dissolution process is predicted depending on the current density which is one of major parameters with finite element method. In experiment, we used stainless steel (SS304) substrate with various sized square and circular array patterns as an anode and copper (Cu) plate as a cathode. A mixture of $H_2SO_4$, $H_3PO_4$ and DIW was used as an electrolyte. After electrochemical etching process, we compared the results of experiment and simulation. As a result, we got the current distribution in the electrolyte and line profile of current density of the patterns from simulation. And etching profile and surface morphologies were characterized by 3D-profiler(${\mu}$-surf, Nanofocus, Germany) and FE-SEM(S-4800, Hitachi, Japan) measurement. From comparison of these data, it was confirmed that current distribution and line profile of the patterns from simulation are similar to surface morphology and etching profile of the sample from the process, respectively. Then we concluded that current density is more concentrated at the edge of pattern and the depth of etched area is proportional to current density.

• 한국과학교육학회지
• /
• 제14권1호
• /
• pp.58-69
• /
• 1994

In this study, with the problem of "What is the desirable illustrations?", the problem points of the existing textbooks were analyzed, and the opinions of experts concerning desirable illustrations were examined through questionaire survey, and by developing 'Analysis Framework of Illustrations', and Korean-Japanese 'science' textbooks were analyzed and compared with. The conclusions for the direction of korean 'science' textbooks are summarized as follows : 1) The numbers of korean illustrations should be more about two than one of per one page of the existing textbooks. 2) The korean illustrations for the 6th grade should be more largely inserted. 3) The more econmic space utilizing measure should be groped for looking at from the such side. 4) Though the kinds of Korean illustrations are mostly composed of photographs, pictures, illustrations, cartoons, etc. should be positively utilized. and the shapes of photographs should be diversified by such as square, round shape,omissions of background and others. 5) The distribution of players by sex should be considered envenly for male and female from the ascendency of male (1.5: 1). 6) It was found that it is desirable for the formation of role of illustrations of 20% for motive inducement, 45% for guidance for experimentation, 30% for presentation of data, and 5% for presentation of the results of experimentation. 7) The illustrations for guidance for experimentation should present important stages of experimentation process regardless the number of illustration. 8) It would be advantageous for motive induction to find the subject matters as possible as from the children's close actual life. 9) It is necessary to induce more freely method in utilizing Printing plate for inserting illustrations. 10) It is the result of research that the existing Korean textbooks are not suitable in inducing interest, and the positive strategy to induce interest is demanded. 11) It is required to select their location freely in accordance with the content regardless the. 12) In order to develop such illustrations, it is required to cultivate expert illustrators, and more economic investment is required for development of illustrations. The emphasis matters of revision of the 6th educational process of 'Inducement of study motive and emphasis on interest' is the change of presenting form and method of illustrations, which is expected to be rewarded with much good fruits.

• Current Optics and Photonics
• /
• 제1권2호
• /
• pp.107-112
• /
• 2017

An adaptive optics system can be simulated or analyzed to predict its closed-loop performance. However, this type of prediction based on various assumptions can occasionally produce outcomes which are far from actual experience. Thus, every adaptive optics system is desired to be tested in a closed loop on an optical test bench before its application to a telescope. In the close-loop test bench, we need an atmospheric simulator that simulates atmospheric disturbances, mostly in phase, in terms of spatial and temporal behavior. We report the development of an atmospheric turbulence simulator consisting of two point sources, a commercially available deformable mirror with a $12{\times}12$ actuator array, and two random phase plates. The simulator generates an atmospherically distorted single or binary star with varying stellar magnitudes and angular separations. We conduct a simulation of a binary star by optically combining two point sources mounted on independent precision stages. The light intensity of each source (an LED with a pin hole) is adjustable to the corresponding stellar magnitude, while its angular separation is precisely adjusted by moving the corresponding stage. First, the atmospheric phase disturbance at a single instance, i.e., a phase screen, is generated via a computer simulation based on the thin-layer Kolmogorov atmospheric model and its temporal evolution is predicted based on the frozen flow hypothesis. The deformable mirror is then continuously best-fitted to the time-sequenced phase screens based on the least square method. Similarly, we also implement another simulation by rotating two random phase plates which were manufactured to have atmospheric-disturbance-like residual aberrations. This later method is limited in its ability to simulate atmospheric disturbances, but it is easy and inexpensive to implement. With these two methods, individually or in unison, we can simulate typical atmospheric disturbances observed at the Bohyun Observatory in South Korea, which corresponds to an area from 7 to 15 cm with regard to the Fried parameter at a telescope pupil plane of 500 nm.

• 동아시아식생활학회지
• /
• 제18권6호
• /
• pp.873-883
• /
• 2008

In this study, we assessed consumers' recognition of frozen foods via a survey study, and monitored the contamination levels of total aerobic bacteria and Escherichia coli in imported and domestic frozen seafoods obtained from five whole sale markets in Seoul. A questionnaire used to assess the perception of frozen food safety and the attitude towards frozen food usage was developed and distributed to 350 adults. A total of 324 questionnaires were subjected to frequency analysis and a chi-square test, using SPSS for Windows. The results of our survey study demonstrated that 44.6% of the respondent consumed frozen processed foods two to three times per month, with dumplings being the most frequently purchased. 70.5% of the respondents selected "convenient cooking" as the principal reason for their frozen food purchases. 58% of the respondents believed that frozen processed food is not safe to eat as the result of food additives and changes in quality during the shelf life period. Consumers most profoundly preferred frozen seafood originating from America, and preferred that from China least profoundly (81.2%). Microbiological analyses demonstrated that the aerobic plate counts of frozen seafood, regardless of origin, fulfill the standard requirements except for one frozen clam (6.6 Log CFU/g), which was a heated-frozen domestic product. In addition, E. coli was isolated from frozen cooked mussels, frozen raw clams and squids, thus indicating that more strict hygienic regulation for frozen seafoods will be necessary to protect the consumer in both domestic and foreign markets.