• Proceedings of The Korean Society of Agricultural and Forest Meteorology Conference
• /
• 2019.08a
• /
• pp.192-192
• /
• 2019

• Journal of the Korean Wood Science and Technology
• /
• v.19 no.1
• /
• pp.71-80
• /
• 1991

This study was carried out to investigate replaceable species with the conventional sounding board sitka spruce. by comparing the dynamic properties such as density, dynamic Young's modulus and internal friction Dynamic Young's modulus. internal friction of longitudinal and radial direction measured in free mass-free boundary condition for facile vibration analysis and measured by forced vibration method. Dynamical properties of four species were measured on squared plate specimen that the four edges were hung vertically by threads and driven magnetically through an iron piece glued on the specimen, by the use of condenser microphone as vibration transducer, and analyzed by FFT analyzer. The results obtained were as follows: 1. Chaldni method using aluminum powder was proper to identify the vibration mode in the plate vibration and it was possible to verify the resornance mode. 2. It was considered that it was necessary to investigate the influence of adhesive part on the plate vibration when the sounding board was made by two or three small board adhesion. 3. It was considered that plate vibration method, which was a superior to the vibration test of beam, was suitable for selecting suounding board because dynamic Young's modulus and internal friction show different order according to longitudinal and radial direction. 4. Paulownia tomentosa Thunb.) Steudel has been considered to be replaceable species with sitka spruce because it has high dynamic Young's modulus compared with low density, low internal friction, and K value of Paulownia tomentosa (Thunb.) Steudel is greater than that of sitka spruce.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.1
• /
• pp.20-27
• /
• 2017

The aim of this paper is to present the modulus of elasticity of $E_L$, $E_R$, $E_T$ along three principal axis of softwood dimension lumber by nondestructive method. Ultrasonic measurement was carried out on defect free wood samples taken by the Japanese Larch, SPF (spruce-pine-fir) and Hem-fir $2{\times}4s$. The ultrasound velocities were measured to calculate young's moduli and it was derived elastic constants for each wood samples using the ultrasound velocities and densities of wood. From the test, $E_L$ was much greater than $E_R$ and $E_T$. $E_R/E_T$ ratios were about 1.3. The high density wood had high young's moduli in three principal axis and the difference in young's moduli between species was greater in transverse direction than longitudinal direction. The anisotropy of the lumber was presented through the calculated elastic moduli and compliances matrix in diagonal term were determined by inverting the stiffness matrix.

• Applied Chemistry for Engineering
• /
• v.31 no.3
• /
• pp.277-283
• /
• 2020

The smoke hazard assessment of building materials focusing on smoke performance index-II (SPI-II) and smoke growth index-II (SGI-II) was investigated. The test species used were Japanese cedar, spruce, lauan, and red pine. The smoke characteristics of wood specimen were investigated using a cone calorimeter (ISO 5660-1). SPI-II was measured after the combustion reaction increased by 1.31~2.15 times based on red pine. The fire risk by SPI-II increased in the order of spruce, lauan, Japanese ceda, and red pine. SGI-II increased by 1.18~2.55 times compared to that of Japnese ceda. The fire risk caused by SGI-II increased in the order of Japanese ceda, spruce, lauan, and red pine. CO_mean concentrations were ranged from 58 to 133 ppm, which was higher than permissible exposure limits of the occupational safety and health administration (OSHA), 50 ppm. Therefore, woods such as red pine containing various volatile organic substances, were considered to be highly smoke hazardous due to low SPI-II and high SGI-II.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.1
• /
• pp.18-24
• /
• 2002

Small Sitka spruce specimens of 50×133×10 mm³ were artificially weathered in a chamber equipped with 340 mm xenon arc and water spray as part of the accelerated-weathering cycle. Specimens were exposed to only ultraviolet or ultraviolet with water spray for 10 and 20 hours. Physical properties of the weathered specimens were investigated by colorimetry, sorption and ultrasonic testing methods. The longer exposed to ultraviolet the less bright were the specimens. It was revealed that the water spray treatment accelerated the loss of brightness and increased the wettability. Among the specimens exposed to ultraviolet with water spray the specimens treated for 10 hours showed greater wettability than those for 20 hours, which might lose the wettability due to the excessive degradation on their surfaces. The ultrasonic velocities of the weathered specimens were obviously higher than those of the unweathered. It is considered that the accelerated weathering either increases the modulus of elasticity of wood or decrease the density of wood.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.3
• /
• pp.48-64
• /
• 1988

This study was carried out to investigate the free vibrational properties of traditional and replaceable species for sounding board, using piezoelectrical accelerometer and signal analyzer. In the study, the frequency equations of free-free beam carrying a concentrated mass in the transverse vibration and of free-mass beam in the longitudinal vibration were used. The results obtained were as follows. 1. Average values of dynamic modulus of rigidity of Korean commercial species measured were as follows. Paulownia tomatosa (Thunb.) Steudel: $5.590\times10^9\;dyne/cm^2$ Tilia amurensis Rupr.: $5.414\times10^9\;dyne/cm^2$ Macckia amurensis Rupr.: $10.044\times10^9\;dyne/cm^2$ Fraxinus mandshurica Rupr.: $8.876\times10^9\;dyne/cm^2$ Ulmus davidiana var.japonica Nakai: $8.677\times10^9\;dyne/cm^2$ Pinus rigida Miller: $6.33\times10^9\;dyne/cm^2$ Fraxinus rhynchophylla Hance: $4.666\times10^9\;dyne/cm^2$ 2. The ratio of dynamic transverse Young's modulus to dynamic modulus of rigidity, $E_T/G_{LT}$, was 24.922 for Fraxinus rhynchophylla Hance, which was the highest, 7.317 for Paulownia tomentosa (Thunb.) Steudel, which was the lowest among Korean commercial species measured. 3. The value of longitudinal dynamic Young's modulus was about 3.7% and 19.8%, respectively, higher than those of transverse dynamic and static Young's modulus. The value of transverse dynamic Young's modulus was about 15.5% higher than that of static Young's modulus. 4. Predicted value of MOR in terms of correlation coefficient by transverse dynamic Young's modulus was slightly higher than that of static Young's modulus, but no significance was found out. 5. Transverse dynamic Youne's modulus was $(2.002\pm0.288)\times10^{11}\;dyne/cm^2$ for Fraxinus mandshurlca Rupr., which was the highest, $(0.601\pm0.100)\times10^{11}\;dyne/cm^2$ for Paulownia tomentosa (Thunb.) Steudel, which was the lowest among Korean commercial species measured. The sound velocity of sitka spruce was 5,685 m/sec, which was the highest. 6. Internal friction of Paulownia tomentosa (Thunb.) Steudel was shown the lowest value among Korean commercial species, $(8.795\pm1.795)\times10^{-3}$, but was higher than that of sitka spruce, $(7.331\pm0.991)\times10^{-3}$. Internal friction was shown negative correlation with density and dynamic Young's modulus, respectively. 7. K value was affected largely by internal friction and was the highest, $2.225\times10^8$ for Paulownia tomentosa (Thunb.) Steudel and was the lowest, $0.550\times10^8$ for Fraxinus rhynchophylla Hance. K value of Paulownia tomentosa (Thunb.) Steudel was higher than that of sitka spruce and K values of melapi and cottonwood, which have been considered to be replaceable species with sitka spruce in the piano industry, were lower than those of Paulownia tomentosa (Thunb.) Steudel and mill amurensis Rupr.

• Journal of Korean Society of Forest Science
• /
• v.90 no.3
• /
• pp.338-345
• /
• 2001

This study was conducted to elucidate the relationship between the root structure and the crown structure of Norway spruce(Picea abies [L.] Karst), and thereafter to obtain the regression equation for the estimation of relative root and needle biomass using the tree height and diameter at breast height(DBH) without measurement of root and needle biomass. The study site was Barbis stands of Harz region located in central part of Germany. Five dominant and three co-dominant trees of 30 to 40 year-old Norway spruce were selected and tree height, diameter at breast height, clear bole length, weight of total needle and branch, cross section and sapwood area at breast height for biomass of above ground part and also the length of root, the number of root, the weight of root, the cross section area of root etc. by dividing the horizontal and vertical roots for below ground part of tree were measured. The significantly correlation was shown between the biomass of most of variables of above ground parts and those of below ground parts. For the diameter of breast height to the weight of total root, regression equation was Y = 3.56X - 45.94 and decision coefficient was 0.96 showing highly correlation. The weight of total branches and needles, and the tree height etc. of above ground parts showed highly positive relationship with below ground biomass. The results obtained from this study can be used to the estimating of biomass of below ground using variables of above ground such as DBH in the 30 to 40 year-old Norway spruce stands.

• Fire Science and Engineering
• /
• v.31 no.2
• /
• pp.37-43
• /
• 2017

The combustion characteristics of four kinds of wood specimens, such as Japan cedar, spruce, lauan, and red pine, were tested using the standards of Cone calorimeter (ISO 5660-1, 2) and smoke density tester (ASTM E 662). Japan cedar caught fire the quickest but the mean heat release rate was the lowest, $58.52kW/m^2$. The mean heat release rate of red pine appeared to be the highest, $71.75kW/m^2$. The lauan and Japan cedar generated relatively large amounts of carbon monoxide while the red pine and the spruce generated relatively large amounts of carbon dioxide. The red pine generated large amounts of smoke and the spruce generated the least amounts of smoke than the other samples. The total smoke release rate in the dynamic method was the highest in red pine and the lowest in spruce. The smoke density of red pine in the static method was highest in the non-flaming and flaming methods. In the non-flaming method, the smoke density of lauan was the second highest, whereas the flaming method was the least. In terms of the heat release rate, the fire risk from red pine was highest among the four test specimens. From the viewpoint of smoke generation, red pine was the most dangerous material in both dynamic and static methods.

• Fire Science and Engineering
• /
• v.32 no.5
• /
• pp.6-14
• /
• 2018

This study was carried out with respect to the heat release rate (HRR) properties of building wood. Heat release characteristics were measured using a cone calorimeter (ISO 5660-1) with four kinds of wood. The time to ignition measured after the combustion in $25kW/m^2$ external heat flux was 35 to 55 s. Time to ignition of both lauan and red pine was marked with the most delayed value in each of 54 s, 55 s. The maximum heat release rate ($HRR_{peak}$) was $156.87{\sim}235.1kW/m^2$, and the risk of early fire was highest in spruce. Total heat release of red pine was obtained in the highest value with $114.2MJ/m^2$. The mean effective heat of combustion of Japanese cedar was 19.1 MJ/kg and the highest among the samples. Fire risk of wood by FPI was orderly increased from lauan ($0.2468s{\cdot}m^2/kW$), red pine ($0.2339s{\cdot}m^2/kW$), spruce ($0.2308s{\cdot}m^2/kW$) to Japanese cedar ($0.2231s{\cdot}m^2/kW$). Fire risk of wood by FGI get increased from lauan ($0.5088kW/m^2{\cdot}s$), red pine ($0.5111kW/m^2{\cdot}s$), Japanese cedar ($2.8522kW/m^2{\cdot}s$) to spruce ($3.0662kW/m^2{\cdot}s$). Therefore, the risk of fire on the heat release characteristics of woods were found that spruce and Japanese cedar showed the high value compared with the other specimens.

• Journal of agriculture & life science
• /
• v.46 no.2
• /
• pp.35-42
• /
• 2012

This study was conducted to investigate growth responses at 45 days after cutting in six Sedum cultivars (S. reflexum 'Blue Spruce', S. rupestre 'Angelina', S. sexangulare, S. sexangulare var. elatum, S. spurium 'Atropurpureus', S. takesimense) using vegetation mats (individual coir tape and jute treated with different thicknesses and soil compositions) to broaden usefulness of evergreen Sedum cultivars. All the treatments including both single and interaction between treatments showed significant effects (p<0.001) on the number of branches, plant height, and shoot fresh weight except the number of branches treated with different mat types. No. of branches was showed two times in compost than in sand regardless of cultivars and mat types with the exception of S. takesimense showing no added branches in all treatments. Each plant height of all the cultivars except 'Angelina' showed the highest value under the conditions treated with 5 mm thick coir tape using compost. The fresh weight of 'Blue Spruce' treated with 5 mm thick coir tape using compost was 13.19 g of which value was the highest in all treatments. The better growth response in all Sedum cultivars was shown in the treatment of 5 mm thick coir tape than with jute net treatment.