• Smart Structures and Systems
• /
• 제33권2호
• /
• pp.165-175
• /
• 2024

Rotating beams play a crucial role in representing complex mechanical components that are prevalent in vital sectors like energy and transportation industries. These components are susceptible to the initiation and propagation of cracks, posing a substantial risk to their structural integrity. This study presents a two-stage methodology for detecting the location and estimating the size of an open-edge transverse crack in a rotating Euler-Bernoulli beam with a uniform cross-section. Understanding the dynamic behavior of beams is vital for the effective design and evaluation of their operational performance. In this regard, modal parameters such as natural frequencies and eigenmodes are frequently employed to detect and identify damages in mechanical components. In this instance, the Frobenius method has been employed to determine the first two natural frequencies and corresponding eigenmodes associated with flapwise bending vibration. These calculations have been performed by solving the governing differential equation that describes the motion of the beam. Various parameters have been considered, such as rotational speed, beam slenderness, hub radius, and crack size and location. The effect of the crack has been replaced by a rotational spring whose stiffness represents the increase in local flexibility as a result of the damage presence. In the initial phase of the proposed methodology, a damage index utilizing the slope of the beam's eigenmode has been employed to estimate the location of the crack. After detecting the presence of damage, the size of the crack is determined using a Genetic Algorithm optimization technique. The ultimate goal of the proposed methodology is to enable the development of more suitable and reliable maintenance plans.

• 대한기계학회논문집
• /
• 제16권4호
• /
• pp.737-752
• /
• 1992

본 연구에서는 링크를 여러개의 2절점 6자유도의 보 요소로 이상화하고 링크 의 운동을 평면 운동으로 한정하며 링크의 지지부의 강성은 무한대이고 회전 대우 부 분의 간극은 없는 것으로 가정하여 링크의 탄성 변형에 관한 운동 반정식을 유도하였 다. 즉, 변위법에 기초한 정적 변위 해석에 관한 유한 요소법에서 관성력, 중력 그 리고 외력을 외부 부하로 간주하여 동적인 운동 방정식을 유도하였다. 여기에, 회전 대우의 베어링을 선형 스프링으로 이상화하여 유연성 링크의 일부분으로 고려함으로써 베어링의 탄성 변형이 유연성 링크의 동적 변형에 미치는 영향에 대하여 고찰하였다. 베어링의 탄성 변형이 고려된 유연성 링크에 관한 운동 방정식을 모우드 중첩법에 근 거를 둔 수치해법으로 그 해를 구하였다.

• 대한토목학회논문집
• /
• 제35권5호
• /
• pp.1025-1037
• /
• 2015

지반과 상부 구조물 사이의 경계에서 유연성이 확보된 지진동 격리 받침 시스템을 설치한 후에 전체 구조물의 고유 주기를 연장하고 구조물에 전달되는 지진 가속도를 저감하여 구조물을 보호하는 면진 설계 방식이 최근 건설 현장에서 널리 활용되고 있다. 하지만 도심지의 현대 구조물이 점차 대형화 및 고층화 되면서 기존의 면진 받침을 그대로 사용하기에는 지진 발생시 저항 능력의 부족으로 인한 전단파괴 혹은 잔류변형이 발생하여 구조물의 사용성 향상을 위한 보수 및 붕괴 위험에 따른 철거의 문제점을 발생시킨다. 따라서 본 연구에서는 기존에 주로 사용되는 면진 받침의 저항 강도와 복원성을 향상시키기 위하여 부가적인 개장 시스템을 설치하고 지진 하중에 대한 성능을 평가하고자 한다. 초탄성 형상기억합금 소재의 보강 봉을 납 적층 고무 받침에 설치한 면진 시스템을 설계하고 단자유도 스프링 모델로 모형화하여 지진 데이터를 활용하고 비선형 동적 해석을 실시하였다. 본 연구에서 제안된 면진 시스템이 성능적인 우수성을 입증하기 위하여 기존에 사용된 면진 받침과 여기에 추가로 강재 봉으로 보강된 면진 시스템과의 극한 전단 저항력, 복원성 및 잔류변형 발생 등을 해석을 통하여 비교 평가하였다. 그 결과 초탄성 형상기억합금 소재의 제어 봉으로 보강된 면진 받침이 다른 면진 받침과 비교하여 지진저항 성능에 있어서 우수함을 확인하였다.

• 대한원격탐사학회지
• /
• 제27권3호
• /
• pp.235-258
• /
• 2011

The purpose of this study is to investigate climatological variations from the temporal and spatial surface particulate organic carbon (POC) estimates based on SeaWiFS spectral radiance, and to determine the physical mechanisms that affect the distribution of pac in the Gulf of Mexico. 7-year monthly mean values of surface pac concentration (Sept. 1997 - Dec. 2004) were estimated from Maximum Normalized Difference Carbon Index (MNDCI) algorithm using SeaWiFS data. Synchronous 7-year monthly mean values of remote sensing data (sea surface temperature (SST), sea surface wind (SSW), sea surface height anomaly (SSHA), precipitation rate (PR)) and recorded river discharge data were used to determine physical forcing factors. The spatial pattern of POC was related to one or more factors such as river runoff, wind-derived current, and stratification of the water column, the energetic Loop Current/Eddies, and buoyancy forcing. The observed seasonal change in the POC plume's response to wind speed in the western delta region resulted from seasonal changes in the upper ocean stratification. During late spring and summer, the low-density river water is heated rapidly at the surface by incoming solar radiation. This lowers the density of the fresh-water plume and increases the near-surface stratification of the water column. In the absence of significant wind forcing, the plume undergoes buoyant spreading and the sediment is maintained at the surface by the shallow pycnocline. However, when the wind speed increases substantially, wind-wave action increases vertical motion, reducing stratification, and the sediment were mixed downward rather than spreading laterally. Maximum particle concentrations over the outer shelf and the upper slope during lower runoff seasons were related to the Loop Current/eddies and buoyancy forcing. Inter-annual differences of POC concentration were related to ENSO cycles. During the El Nino events (1997-1998 and 2002-2004), the higher pac concentrations existed and were related to high runoffs in the eastern Gulf of Mexico, but the opposite conditions in the western Gulf of Mexico. During La Nina conditions (1999-2001), low Poe concentration was related to normal or low river discharge, and low PM/nutrient waters in the eastern Gulf of Mexico, but the opposite conditions in the western Gulf of Mexico.

• Child Health Nursing Research
• /
• 제20권2호
• /
• pp.96-104
• /
• 2014

목적 아동을 돌보는 간호사에게 중요한 역량인 아동성장발달에 대한 이해를 위하여 영화를 활용한 영화간호교육 수업설계를 개발하고 간호학생을 대상으로 개발된 수업설계를 적용하고 그 결과를 분석함으로써 보다 효과적인 영화간호교육 전략의 기초자료로 삼고자 하였다. 방법 Kolb의 경험학습모델을 기반으로 영화간호교육의 수업설계를 개발하고 일 대학 간호학과 1학년 대상의 '인간성장발달' 과목에 적용하여 대상자의 학습유형, 영화간호교육의 만족도, 영화간호교육의 장단점 등을 조사하였다. 설문조사에 응한 75명의 자료는 SPSS 통계프로그램을 활용하여 연구목적에 맞게 기술통계와 다변량분산분석, 케이스 백분율 등으로 분석되었다. 결과 아동성장발달 이해를 위한 영화간호교육은 구체적 경험, 반성적 관찰, 추상적 개념화, 그리고 능동적 실험의 4단계로 구성되며 영화감상, 강의, 토론과 작문 등의 수업방법을 포함하였다. 개발된 영화간호교육적용 결과 비교적 높은 만족도를 보였으며 학습유형별, 차시별 학습내용에 대한 영화간호교육 만족도는 통계적으로 유의한 차이가 없었다. 그리고 수업이 재미있고 흥미롭다고 답하거나 영화감상에 시간이 많이 소요된다고 영화간호교육의 장단점을 보고하였다. 결론 경험학습을 도모할 수 있는 영화간호교육의 효과를 극대화하기 위하여 적절한 상업영화의 발굴, 다양한 모듈의 개발, 그리고 영화간호교육의 효과를 명확하게 검증하고 학습성과를 체계적으로 평가할 수 있는 평가방법이 개발되어야 할 것이다.

• 한국정밀공학회지
• /
• 제25권6호
• /
• pp.108-115
• /
• 2008

The wear on engine valve and seat insert is one of the most important factors affecting engine performance. The engine valve and seat insert must be able to withstand the severe environment that is created by: high temperature exhaust gases generated while the engine is running, rapid movement of the valve spring, high pressure generated in the explosive process. In order to study such problems, a simulator has been developed to generate and control high temperatures and various speeds during motion. The wear simulator is considered to be a valid simulation of the engine valve and seat insert wear process with various speeds during engine activity. This work focused on the test of various degrees of wear on four different exhaust valve materials such as HRV40, HRV40-FNV (face nitrided valve), STL #32, STL #6,. Throughout all tests performed in this study, the outer surface temperature of the seat insert was controlled at $350^{\circ}C$, the cycle number was $4.0{\times}10^6$, the test load was 6860 N, the fuel was LPG the test speed was 20 Hz (2400 RPM) and the seat insert material was HVS1-2. The mean (standard deviation) maximum roughness of the exhaust valve and seat insert was $25.44\;(3.16)\;{\mu}m$ and $27.53\;(3.60)\;{\mu}m$ at the HRV40, $21.58\;(2.38)\;{\mu}m$ and $25.94\;(3.07)\;{\mu}m$ at the HRV40-FNV, $36.73\;(8.98)\;{\mu}m$ and $61.38\;(7.84)\;{\mu}m$ at the STL #32, $73.64\;(23.80)\;{\mu}m$ and $60.80\;(13.49)\;{\mu}m$ at the STL #6, respectively. It was discovered that the maximum roughness of exhaust valve was lower as the high temperature hardness of the valve material was higher under the same test conditions such as temperature, test speed, cycle number, test load and seat insert material. The set of the HRV40-FNV exhaust valve and the HVS1-2 seat insert showed the best wear resistance.

• 한국수산과학회지
• /
• 제32권5호
• /
• pp.618-623
• /
• 1999

표층 수온전선과 어장형성과의 관계를 규명하기 위하여 1991년부터 1996년까지 한국선망 41개 선단의 어획자료와 인공위성에 의해 관측된 표층수온자료로부터 구한 표층수온전선과의 관계를 분석 정리한 결과를 요약하면 다음과 같다. 남해 및 동중국해 북부 해역의 선망어장은 주년 전선대 및 그 주변 대마 난류수 연변부에서 좋은 어장이 형성되고 있지만 전선역어장 외에 동계에는 제주도 서쪽 해역의 Water pocket내의 난류역어장, 제주도와 고도열도 사이 등고수온선이 심한 굴곡부내의 대마난류 주류역 어장, 동$\cdot$춘계 대마도 주변의 지형성 와류어장등으로 대별되고 한국 남서부 해역에도 하$\cdot$추계에 연안 전선대 외측과 황해저층냉수 사이의 황해난류역에 좋은 어장이 형성된다.

• 한국보육학회지
• /
• 제18권4호
• /
• pp.65-89
• /
• 2018

본 연구의 목적은 연령별 누리과정 교사용지도서의 과학교육관련 활동에서 제시하고 있는 과학개념 및 교수학습방법을 분석하는 것이다. 연구자료는 교사용지도서의 과학교육관련 활동 772개이며, 과학개념은 물리과학(힘과 운동, 물리적구조, 전기와 자기, 빛과 그림자, 소리의 성질), 화학(물질의 특성, 물질의 반응), 생명과학(조직적 구조, 성장과 변화, 유전과 진화, 동식물과 인간의 관계), 지구과학(지구시스템의 상호작용, 지구시스템의 구조, 우주), 공학(설계된 세상, 공학 설계, 공학 및 기술과 사회), 생태학(환경보존) 영역에서 제시하는 개념을 토대로 분석하였다. 교수학습방법은 대소집단활동 유형, 자유선택활동 유형별로 분석하였다. 과학개념은 3-5세 공통으로 공학, 화학, 생명과학 영역이 주로 제시되고 있었으며, 물리과학은 전 연령에서 낮은 분포로 제시되고 있었다. 과학개념은 주로 '동식물과 자연', '생활도구', '환경과 생활', '봄 여름 가을 겨울'의 생활주제에서 많이 나타났다. 교수학습방법은 3세, 4세는 자유선택활동(과학영역, 실외자유선택활동, 미술영역, 수조작영역 중심), 5세는 대소집단활동(요리, 이야기나누기, 음악활동)이 많이 사용되는 것으로 나타났다.

• 대한족부족관절학회지
• /
• 제26권2호
• /
• pp.88-94
• /
• 2022

Purpose: This study was based on the Korean Foot and Ankle Society (KFAS) member survey and aimed to report the current trends in the epidemiology, diagnosis, and management of acute Achilles tendon rupture (AATR) over the past few decades. Materials and Methods: A web-based questionnaire containing 34 questions was sent to all KFAS members in October 2021. The questions were mainly related to the clinical experience and preferred management of patients with AATR. Answers with a prevalence ≥50% of the respondents were considered a tendency. Results: Seventy-one (12.9%) of the 550 members responded to the survey. The male sex ratio in AATR was answered mean 78%, and the most common age groups were 30~40 years (n=49; 69.0%), and 40~50 years (n=37; 52.1%), in that order. The most common seasons for the occurrence of AATR were spring (37 cases; 52.1%) and autumn (27 cases; 38.0%). Also, sports-related rupture had an average occurrence of 76.2%. The most important clinical factor to determine the type of treatment was the history of previous injuries, and 75.9% of respondents started conservative treatment in the 2010s. The most preferred protocol of conservative treatment was an orthosis capable of ankle range of motion after casting (68.5%), and 53.7% 'satisfied' and 1.9% 'very satisfied' with conservative treatment. The most preferred surgical method was open repair (80.3%), and the Krackow method (60.6%), and 49.3% of treated patients responded 'satisfied' and 45.1% 'very satisfied' with this treatment. Conclusion: This study gives updated information concerning the current trend of epidemiology, diagnosis, and treatment of AATR in Korea. Both consensus and variation in the approach to AATR were identified using this survey study. This study may raise the awareness of various possible approaches toward AATR and should be used to further establish a standard protocol for the management of this injury.

• Journal of Biosystems Engineering
• /
• 제2권1호
• /
• pp.7-24
• /
• 1977

This paper is the forth and fifth one of the study on balanced type oscillating mole drainer. In the light of the results from previous reports about the model tests, some design criteria were established and a prototype machine was set up for experimental purpose. Motion characteristics and functionof the each parts of the machine were checked and analyzed. After that, performance tests of the prototype machine were carried out in thefield. Obtained results are summarized as follows ; 1. Ten centimeter of the bullet diameter was determined so as to be able to attach it to the tractors with capacity of 30 PS to 40 PS. 2. To maintain the balance between the moments of the front shank and rear shank, the oscillating amplitude of the rear bullet was determined to be larger than that of the front bullet. At the same time , the oscillating direction of the rear bullet was designed with the inclines of ten to thirty degrees. 3. An octagonal dynamo transduced was developed for measuring the compressive force of the upper link is measuring the draft force of the machine. Acceptable linear relationship between forces and strain responses from O.D.T. was obtained. 4. Analysing the balancing mechanism of the acting part of the machine , it was found that the total draft force of the machine was equal to the difference between the sum of the draft force produced from the right and left side bending moments of the lower drawber and the compressive force on the upper link. 5. There are acceptable linear relationship between the strain and twisting moment by driving shaft, and between strain and shank moment. Above results enable us to carry out the field experiment with prototype machine. 6. When the test machine was used in the field, it was possible to reduce the oscillating acceleration by forty percent in average as compared it with the single bullet mole drainer. 7. When the test machine was used under the oscillating condition, the dratt torce was reduced by 27 percent to 59 percent as compared it with the test machine under non-oscillating condition, while the draft force was increased by 7 percent to 20 percent as compared it with the mole drainer having oscillating single bullet. The reasoning behind this fact was considered as the resistance force due to the rear shank and bullet. 8. As the amplitude and frequency of the bullet were increased, the torque was increased accordingly. This tendency could be varied with the various characteristics of the given soils. And the larger frequency and amplitute, the more increasing oscil\ulcornerlating power but decreasing draft brce were needed, and draft force was increased as the velocity was increased.9. When the amplitude of the rear bullet was designed to be larger than that of the front bullet, the minimum value of the moment was lowered and oscillating acceleration was reduced. And when the oscillating direction of the rear bullet was declined back\ulcornerwards, oscillating acceleration was increased along with the increasing angle of decli\ulcornernation. When the test machine was operated in high speed, the difference between maximum moments and minimum ones became narrow. This varying magnitude of moments appeared on the moment oscillogram seems to be correlated to the oscillating acceleration and draft force. 10. From the analysis of variance, it was found that those factors such as frequency, amplitude, and operating velocity significantly affected in the oscillating acceleration, the draft resistance, the torque, the moment, and the total power required. And interaction between frequency and amplitude affected in the oscillating acceleration. 11. Within the given situation of this study, the most preferable operating conditions of the test machine were 7 Hz in oscillating frequency, 0.54 m/sec in operating velocity, and 39.1 mm in oscillating amplitude of front and rear bullets. However, it is necessary to select the proper frequency and magnitude of oscillation depending on the soil properties of the field in which the mole drainer is practiced by use of a bal1nced type oscillating mole drainer. 12. It is recommended that a comparative study of the mole drainers would be performed in the near future using two separate balanced oscillating bullet with the one which is operated by oscillating the movable bullet in a single cylinder or other balanced type which may be single oscillating bullet with spring, damper or balancing weight, and that of thing. To expand the applicability of the balanced type oscillating mole drainer in practical use, it is suggested to develop a new mechanism which perform mole drain with vinyl pipe or filling material such as rice hull.