• 제목/요약/키워드: Spring Motion

검색결과 492건 처리시간 0.027초

Dynamic stability of FG-CNT-reinforced viscoelastic micro cylindrical shells resting on nonhomogeneous orthotropic viscoelastic medium subjected to harmonic temperature distribution and 2D magnetic field

  • Tohidi, H.;Hosseini-Hashemi, S.H.;Maghsoudpour, A.;Etemadi, S.
    • Wind and Structures
    • /
    • 제25권2호
    • /
    • pp.131-156
    • /
    • 2017
  • This paper deals with the dynamic stability of embedded functionally graded (FG)-carbon nanotubes (CNTs)-reinforced micro cylindrical shells. The structure is subjected to harmonic non-uniform temperature distribution and 2D magnetic field. The CNT reinforcement is either uniformly distributed or FG along the thickness direction where the effective properties of nano-composite structure are estimated through Mixture low. The viscoelastic properties of structure are captured based on the Kelvin-Voigt theory. The surrounding viscoelastic medium is considered nonhomogeneous with the spring, orthotropic shear and damper constants. The material properties of cylindrical shell and the viscoelastic medium constants are assumed temperature-dependent. The first order shear deformation theory (FSDT) or Mindlin theory in conjunction with Hamilton's principle is utilized for deriving the motion equations where the size effects are considered based on Eringen's nonlocal theory. Based on differential quadrature (DQ) and Bolotin methods, the dynamic instability region (DIR) of structure is obtained for different boundary conditions. The effects of different parameters such as volume percent and distribution type of CNTs, mode number, viscoelastic medium type, temperature, boundary conditions, magnetic field, nonlocal parameter and structural damping constant are shown on the DIR of system. Numerical results indicate that the FGX distribution of CNTs is better than other considered cases. In addition, considering structural damping of system reduces the resonance frequency.

CAD/CAE을 이용한 승용 Jeep의 Key-off시 진동 해석 (The vibration Analysis in Case of Key-off of a Jeep by Using CAD/CAE)

  • 안기원;송상기
    • 한국음향학회지
    • /
    • 제11권4호
    • /
    • pp.5-13
    • /
    • 1992
  • 엔진의 가진력으로 인해 발생되는 차량의 진동은 승차감에 큰 영향을 미치며, 또한 엔진 마운트 계의 동역학적 특성은 차량의 진동 및 소음에 직접적인 영향을 준다. 본 논문에서는 승용 지이프차의 엔진 key-off시 엔진 가진력으로 인한 차체 흔들림(body shake)을 실험을 통하여 측정함과 동시에 매카니즘해석 전용 프로그램인 DADS를 이용한 컴퓨터 시뮬레이션을 통하여 고찰하였다. 컴퓨터 시뮬레이션 모델은 엔진, 후레임이 포함된 차체, 앞 엑슬 그리고 뒤 엑슬로 구성되며, 각 엑슬은 좌우에 타이어를 고려하였다. 실험에서 얻은 차체 흔들림의 실험 결과와 컴퓨터 시뮬레이션한 결과를 비교 검토하였으며, 검증된 컴퓨터 시뮬레이션 모델을 통하여 엔진 마운트 고무의 강성, 엔진마운트의 설치각도 및 마운트 위치를 변경하여 key-off 시 자체 흔들림을 고찰함으로써 엔진 key-off 시의 차체 흔들림의 감소를 확인하였다.

  • PDF

스카이훅 시스템에의 능동 서스펜션 제어 이론 적용에 관한 연구 (A Study on Adopting Active Suspension Control in Sky Hook System)

  • 박중현;장승재
    • 한국정보통신학회논문지
    • /
    • 제10권5호
    • /
    • pp.950-955
    • /
    • 2006
  • 본 논문에서는 스카이훅댐퍼 시스템의 해석 및 설계에 능동 서스펜션 제어 이론을 적용하여 현가장치설계에 응용 할 수 있는 이론 및 실험 적 제어장치 적용에 관한 연구를 수행하였다. 최근의 현가장치설계에서는 강성과 감쇠를 능동적으로 제어하는 기술의 적용이 일반화되고 있으며, 다른 차량안정성 제어장치와의 연계성이 높아짐에 따라, 제어 시스템설계에서 보다 내구성 이 강하고 제어효과의 응답성이 빠르며 정도 또한 높은 제어장치의 필요성이 요구되고 있다. 본 연구는 댐퍼의 위치관계에 따른 스카이훅시스템을 해석하여 위와 같은 빠른 응답성과 높은 정도의 제어가 가능한 제어시스템을 해석, 설계하기 위하여 강인제어시스템의 적용에 관한 고찰을 하였다. 그리고 제어대상시스템에 대한 강인제어시스템을 설계하기 위한 모델링 및 적용방법을 수식적으로 해석하였으며, 스카이훅현가장치의 제어시 스템설계에 중요한 내외란성 향상을 위한 강인제어시스템설계에 적용하는 방법에 관해 고찰하였다.

유연한 지지 구조와 유체 동압 베어링으로 지지되는 HDD의 회전 유연 디스크-스핀들 시스템에 대한 유한 요소 고유 진동 해석 (Finite Element Modal Analysis of a Spinning Flexible Disk-Spindle System Supported by Hydro Dynamic Bearings and Flexible Supporting Structures In a HDD)

  • 한재혁;장건희
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2003년도 추계학술대회논문집
    • /
    • pp.572-578
    • /
    • 2003
  • The free vibration of a spinning flexible disk-spindle system supported by hydro dynamic bearings in a HDD is analyzed by FEM. The spinning flexible disk is described using Kirchhoff plate theory and von Karman non-linear strain, and its rigid body motion is also considered. It is discretized by annular sector element. The rotating spindle which includes the clamp, hub, permanent magnet and yoke, is modeled by Timoshenko beam including the gyroscopic effect. The flexible supporting structure with a complex shape which includes stator core, housing, base plate, sleeve and thrust pad is modeled by using a 4-node tetrahedron element with rotational degrees of freedom to satisfy the geometric compatibility. The dynamic coefficients of HDB are calculated from the HDB analysis program, which solves the perturbed Raynolds equation using FEM. Introducing the virtual nodes and the rigid link constraints defined in the center of HDB, beam elements of the shaft are connected to the solid elements of the sleeve and thrust pad through the spring and damper element. The global matrix equation obtained by assembling the finite element equations of each substructure is transformed to the state-space matrix-vector equation, and the associated eigenvalue problem is solved by using the restarted Arnoldi iteration method. The validity of this research is verified by comparing the numerical results of the natural frequencies with the experimental ones. Also the effect of supporting structures to the natural modes of the total HDD system is rigorously analyzed.

  • PDF

방향제어 조직밸브의 동특성에 관한 연구 (A Study on Dynamic Characteristics of Directional Control Logic Valve)

  • 이일영;오세경
    • 수산해양기술연구
    • /
    • 제24권4호
    • /
    • pp.172-179
    • /
    • 1988
  • A cartridge type hydraulic logic valve consists of simple two port valve whose poppet is closed or opened by means of pressure signal of a pilot line. Accordingly, the logic valve can be used not only for direction, flow and pressure control purpose but also for versatile function valve which enables all above mentioned functions. In addition, the valve has little internal leakage and pressure loss, superior response characteristics and easiness in making small block type valve. The above mentioned good performances being recognized recently, the logic valve has been used widely in the large scale hydraulic system such as a hydraulic press system, for the performance requirements of high speed operation and precise control characteristics. However, there are scarce reports until now, except for a few ones from Aachen Institute of Technology in West Germany, so it is necessary to be studied on development and investigation for practical application. This paper showed that the static and dynamic characteristics of a logic valve when the logic valve is used for directional control, to investigate the relations between the valve operating characteristics and the valve design conditions. From the above mentioned procedure, it was ascertained that the valve operation characteristics obtained by numerical analysis showed good agreements with experimental results. The representative results obtained are as follows; 1. During the valve is closing, the poppet velocity is almost constant in the logic valve. 2. The pilot pressure P sub(3) and the resistance R in the pilot line have much influences on the valve operation time. 3. Spring strength have not such a severe influence on the valve operating time. 4. The operation characteristics of the logic valve can be estimated with good accuracy comparatively by numerical analysis with the equations describing poppet motion.

  • PDF

Free vibration analysis of combined system with variable cross section in tall buildings

  • Jahanshahia, Mohammad Reza;Rahgozar, Reza
    • Structural Engineering and Mechanics
    • /
    • 제42권5호
    • /
    • pp.715-728
    • /
    • 2012
  • This paper deals with determining the fundamental frequency of tall buildings that consist of framed tube, shear core, belt truss and outrigger systems in which the framed tube and shear core vary in size along the height of the structure. The effect of belt truss and outrigger system is modeled as a concentrated rotational linear spring at the belt truss and outrigger system location. Many cantilevered tall structures can be treated as cantilevered beams with variable cross-section in free vibration analysis. In this paper, the continuous approach, in which a tall building is replaced by an idealized cantilever continuum representing the structural characteristics, is employed and by using energy method and Hamilton's variational principle, the governing equation for free vibration of tall building with variable distributed mass and stiffness is obtained. The general solution of governing equation is obtained by making appropriate selection for mass and stiffness distribution functions. By applying the separation of variables method for time and space, the governing partial differential equation of motion is reduced to an ordinary differential equation with variable coefficients with the assumption that the transverse displacement is harmonic. A power-series solution representing the mode shape function of tall building is used. Applying boundary conditions yields the boundary value problem; the frequency equation is established and solved through a numerical process to determine the natural frequencies. Computer program has been developed in Matlab (R2009b, Version 7.9.0.529, Mathworks Inc., California, USA). A numerical example has been solved to demonstrate the reliability of this method. The results of the proposed mathematical model give a good understanding of the structure's dynamic characteristics; it is easy to use, yet reasonably accurate and suitable for quick evaluations during the preliminary design stages.

이산폰툰형 부유식교량의 지진응답해석 (Seismic Response Analysis of a Floating Bridge with Discrete Pontoons)

  • 권장섭
    • 한국지진공학회논문집
    • /
    • 제9권2호통권42호
    • /
    • pp.47-58
    • /
    • 2005
  • 이산폰툰형 부유식교량의 시간영역 지진응답해석을 지진파의 공간분포를 고려하여 수행하였다. 지반운동의 공간변화는 파의 통과 영향, 엇결성 뎡향 및 국부지반 영향을 반영하는 결맞음 함수 모델로 고려하였다. 부유식 교량의 상부구조는 공간뼈대요소와 탄성현수케이블요소를 이용하여 모델링 하였고, FHWA 가이드라인의 스프링 모델을 사용하여 교대의 지반 구조물 상호작용에 대한 영향을 고려하엿으며, 경계요소법으로 산정한 폰툰 동수력계수의 주파수 의종성을 고려하기 위해서 시간지연함수를 사용하였다. 지반운동의 공간변화를 고려한 다중지점 지진입력을 교량의 양단에 도입하였고 응답의 시간이력을 동시 가진 시와 비교하였다. 장주기의 동적특성을 갖는 이산폰툰형 부유식 교량의 지진응답 해석에서 지반운동의 공간분포를 고려할 경우에 주몰할만한 응답의 증폭이 나타날 수 있음을 확인하였다.

Receptance 방법에 의한 골조구조계의 진동해석 (Vibration Analysis of Frame Structural Systems by the Receptance Method)

  • 한성용;김극천
    • 대한조선학회논문집
    • /
    • 제28권2호
    • /
    • pp.174-186
    • /
    • 1991
  • 해상 및 육상구조물에는 다수의 보 및 봉요소들로 구성된 골조구조계 또는 이에 감쇠가 있는 스프링·질량계로 유추될 수 있는 부가물이 부가된 복합적구조계가 있다. 이와 같은 계의 진동해석을 효율적으로 수행하기 위해 receptance방법을 근간으로 하는 해석적 방법을 제시했다. 자유진동특성 및 집중기진력에 대한 응답을 계산하기 위해 균일단면 Timoshenko보 및 봉의 receptance를 유도하고 이들을 각종 부가물들의 receptance와 함께 합성하는 방법을 제시했다. 이때 복합계의 감쇠특성도 각 구성요소 감쇠특성의 합성에 의해 산정된다. 또한 지지부에 변위기진이 작용하는 경우에 대한 동적응답계산을 수행할수 있도록 균일단면 Timoshenko보 및 봉의 Support Displacement Transfer Ratio를 유도하고 이를 다른 구성요소들의 receptance와 합성하는 방법도 제시했다. 이와같은 방법은 특히 부분적 설계변수변경에 따른 동특성치 재산정예 있어서 매우 편리하다.

  • PDF

산화제 개폐밸브의 힘평형에 관한 연구 (A Study on the Force Balance of a Main Oxidizer shutoff Valve)

  • 전재형;홍문근;김현준;이수용
    • 한국항공우주학회지
    • /
    • 제37권8호
    • /
    • pp.812-818
    • /
    • 2009
  • 산화제 개폐밸브는 일반적으로 공압으로 포핏을 열고 닫음으로써 로켓엔진에 액체산화제유량을 제어한다. 상용되는 산업용 밸브와는 달리 현재 개발 중인 산화제 개폐밸브는 밸브는 효과적인 기밀을 위해 피스톤과 포핏이 접촉되어 있을 뿐, 분리되어 설계되어졌다. 밸브가 닫히는 동안 피스톤과 포핏이 떨어져서 움직이는 것을 피하고, 밸브의 전반적인 작동 성능을 파악하기 위해서 힘평형 해석이 수행되었다. 또한 더욱 정확한 해석을 위해, 마찰력과 포핏에 작용하는 힘을 각각 시험과 CFD 해석을 통해 구해내었다. 해석 결과를 통해 힘평형 해석에서 스프링, 마찰력과 공압부의 오리피스 크기와 같은 중요한 설계인자들의 영향을 알아보았으며, 현재 개발 설계중인 산화제 개폐밸브의 작동성능을 확인하였다.

센서위치를 고려한 능동 서스펜션 강인제어에 관한 연구 (A Study on Active Suspension Robust Control with Sensor and Actuator Location)

  • 박중현;장승재
    • 한국정보통신학회논문지
    • /
    • 제10권6호
    • /
    • pp.1147-1152
    • /
    • 2006
  • 본 논문에서는 스카이훅댐퍼 시스템의 해석 및 설계에 능동 서스펜션 강인제어 이론을 적용하여 현가장치설계에 응용 할 수 있는 이론 및 실험적 제어 장치 적용에 관한 연구를 수행하였다. 최근의 현가장치설계에서는 강성과 감쇠를 능동적으로 제어하는 기술의 적용이 일반화되고 있으며, 다른 차량안정성제어장치와의 연계성이 높아짐에 따라, 제어시스템설계에서 보다 내구성이 강하고 제어효과의 응답성이 빠르며 정도 또한 높은 제어장치의 필요성이 요구되고 있다. 본 연구는 센서의 위치 관계에 따른 능동현가시스템을 해석하여 위와 같은 빠른 응답성과 높은 정도의 제어가 가능한 제어시스템을 해석, 설계하기 위하여 강인제어시스템의 적용에 관한 고찰을 하였다. 그리고 제어대상시스템에 대한 강인제어시스템을 설계하기 위한 모델링 및 적용방법을 수식적으로 해석하였으며, 스카이훅현가장치의 제어시스템설계에 중요한 내외란성 향상을 위한 강인제어 시스템설계에 적용하는 방법에 관해 고찰하였다.