Browse > Article
http://dx.doi.org/10.12989/was.2017.25.2.131

Dynamic stability of FG-CNT-reinforced viscoelastic micro cylindrical shells resting on nonhomogeneous orthotropic viscoelastic medium subjected to harmonic temperature distribution and 2D magnetic field  

Tohidi, H. (Department of Mechanical and Aerospace Engineering, Science and Research Branch, Islamic Azad University)
Hosseini-Hashemi, S.H. (Department of Mechanical and Aerospace Engineering, Science and Research Branch, Islamic Azad University)
Maghsoudpour, A. (Department of Mechanical and Aerospace Engineering, Science and Research Branch, Islamic Azad University)
Etemadi, S. (Department of Mechanical and Aerospace Engineering, Science and Research Branch, Islamic Azad University)
Publication Information
Wind and Structures / v.25, no.2, 2017 , pp. 131-156 More about this Journal
Abstract
This paper deals with the dynamic stability of embedded functionally graded (FG)-carbon nanotubes (CNTs)-reinforced micro cylindrical shells. The structure is subjected to harmonic non-uniform temperature distribution and 2D magnetic field. The CNT reinforcement is either uniformly distributed or FG along the thickness direction where the effective properties of nano-composite structure are estimated through Mixture low. The viscoelastic properties of structure are captured based on the Kelvin-Voigt theory. The surrounding viscoelastic medium is considered nonhomogeneous with the spring, orthotropic shear and damper constants. The material properties of cylindrical shell and the viscoelastic medium constants are assumed temperature-dependent. The first order shear deformation theory (FSDT) or Mindlin theory in conjunction with Hamilton's principle is utilized for deriving the motion equations where the size effects are considered based on Eringen's nonlocal theory. Based on differential quadrature (DQ) and Bolotin methods, the dynamic instability region (DIR) of structure is obtained for different boundary conditions. The effects of different parameters such as volume percent and distribution type of CNTs, mode number, viscoelastic medium type, temperature, boundary conditions, magnetic field, nonlocal parameter and structural damping constant are shown on the DIR of system. Numerical results indicate that the FGX distribution of CNTs is better than other considered cases. In addition, considering structural damping of system reduces the resonance frequency.
Keywords
dynamic stability; FG-CNT-reinforced visco-cylindrical shell; DQ and Bolotin methods; harmonic temperature distribution; 2D magnetic field;
Citations & Related Records
Times Cited By KSCI : 5  (Citation Analysis)
연도 인용수 순위
1 Uematsu, Y., Tsujiguchi, N. and Yamada, M. (2001), "Mechanism of ovalling vibrations of cylindrical shells in cross flow", Wind Struct., 4(2), 85-100.   DOI
2 Wan, H., Delale, F. and Shen, L. (2005), "Effect of CNT length and CNT-matrix interphase in carbon nanotube (CNT) reinforced composites", Mech. Res. Commun., 32(5), 481-489.   DOI
3 Yakobson, B.I., Brabec C.J. and Bernholc, J. (1996), "Nanomechanics of carbon tubes: Instability beyond linear response", 76, 2511-2514.   DOI
4 Ye, T., Jin, G. and Su, Z.H. (2016), "Three-dimensional vibration analysis of functionally graded sandwich deep open spherical and cylindrical shells with general restraints", J. Vib. Control., 22, 3326-3354.   DOI
5 Ye, T. and Jin, G. (2016), "Elasticity solution for vibration of generally laminated beams by a modified Fourier expansion-based sampling surface method", Comput. Struct., 167, 115-130.   DOI
6 Ye, T., Jin, G. and Su, Z.H. (2016), "A spectral-sampling surface method for the vibration of 2-D laminated curved beams with variable curvatures and general restraints", Int. J. Mech. Sci., 110, 170-189.   DOI
7 Yu, M.F., Files, B.S., Arepalli, S. and Ruoff, R.S. (2000), "Tensile loading of ropes of single wall carbon nanotubes and their mechanical properties", Phys. Rev. Lett., 84, 5552-5555.   DOI
8 Zamanian, M., Kolahchi, R. and Rabani Bidgoli, M. (2017), "Agglomeration effects on the buckling behaviour of embedded concrete columns reinforced with SiO2 nano-particles", Wind Struct., 24(1), 43-57.   DOI
9 Zhou, H., Li, W., Lin, B. and Li, W.L. (2012), "Free vibrations of cylindrical shells with elastic-support boundary conditions", Appl. Acoust., 73(8), 751-756.   DOI
10 Civalek, O. (2016), "Free vibration of carbon nanotubes reinforced (CNTR) and functionally graded shells and plates based on FSDT via discrete singular convolution method", Compos. Part B, In press.
11 Jin, G., Ye, T., Wang, X. and Miao, X. (2016), "A unified solution for the vibration analysis of FGM doubly-curved shells of revolution with arbitrary boundary conditions", Compos. Part B: Eng., 89, 230-252.   DOI
12 Khalili, S.M.R., Davar, A. and Fard, K.M. (2012), "Free vibration analysis of homogeneous isotropic circular cylindrical shells based on a new three-dimensional refined higher-order theory", Int. J. Mech. Sci., 56(1), 1-25.   DOI
13 Koizumi, M. (1993), "The concept of FGM. ceramic transactions", Funct. Grad. Mat., 34, 3-10.
14 Kolahchi, R., Hosseini, H. and Esmailpour, M. (2016a), "Differential cubature and quadrature-Bolotin methods for dynamic stability of embedded piezoelectric nanoplates based on visco-nonlocal-piezoelasticity theories", Compos. Struct., 157, 174-186.   DOI
15 Kolahchi, R., Safari, M. and Esmailpour, M. (2016), "Dynamic stability analysis of temperature-dependent functionally graded CNT-reinforced visco-plates resting on orthotropic elastomeric medium", Compos. Struct., 150, 255-265.   DOI
16 Liew, K.M., Lei, Z.X. and Zhang, L.W. (2015), "Mechanical analysis of functionally graded carbon nanotube reinforced composites: A review", Compos. Struct., 120, 90-97.   DOI
17 Lei, Z.X., Zhang, L.W., Liew, K.M. and Yu, J.L. (2014), "Dynamic stability analysis of carbon nanotube-reinforced functionally graded cylindrical panels using the element-free kp-Ritz method", Compos. Struct., 113, 328-338.   DOI
18 Li, Y.Q. and Tamura, Y. (2005), "Nonlinear dynamic analysis for large-span single-layer reticulated shells subjected to wind loading", Wind Struct., 8(1), 35-48.   DOI
19 Li, S. and Wang, G. (2008), Introduction to Micromechanics and Nanomechanics, World Scientific Publication, Singapore.
20 Loy, C.T., Lamm K.Y. and Reddym J.N. (1999), "Vibration of functionally graded cylindrical shells", Int. J. Mech. Sci., 41(3), 309-324.   DOI
21 Madani, H., Hosseini, H. and Shokravi, M. (2016), "Differential cubature method for vibration analysis of embedded FG-CNT-reinforced piezoelectric cylindrical shells subjected to uniform and non-uniform temperature distributions", Steel Compos. Struct., 22(4), 889-913.   DOI
22 Mirzaei, M. and Kiani, Y. (2016), "Free vibration of functionally graded carbon nanotube reinforced composite cylindrical panels", Compos. Struct., In press.
23 Mosharrafian. F. and Kolahchi, R. (2016), "Nanotechnology, smartness and orthotropic nonhomogeneous elastic medium effects on buckling of piezoelectric pipes", Struct. Eng. Mech., 58(5), 931-947.   DOI
24 Pradhan, S.C., Loy, C.T., Lam, K.Y. and Reddy, J.N. (2000), "Vibration characteristics of functionally graded cylindrical shells under various boundary conditions", Appl. Acoust., 61(1), 111-129.   DOI
25 Anon, A. (1996), "FGM components: PM meets the challenge", Met. Powd. Rep., 51, 28-32.
26 Alibeigloo, A. and Shabanm, M. (2013), "Free vibration analysis of carbon nanotubes by using three-dimensional theory of elasticity", Acta Mech., 224(7), 1415-1427.   DOI
27 Alibeigloo, A. (2014), "Free vibration analysis of functionally graded carbon nanotubereinforced composite cylindrical panel embedded in piezoelectric layers by using theory of elasticity", Eur. J. Mech. A - Solids, 44, 104-115.   DOI
28 Alijani, A., Darvizeh, M., Darvizeh, A. and Ansari, R. (2015), "On nonlinear thermal buckling analysis of cylindrical shells", Thin Wall. Struct., 95, 170-182.   DOI
29 Bich, D.H., VanDung, D., Nam, V.H. and Phuong, N.T. (2013), "Nonlinear static and dynamic buckling analysis of imperfect eccentrically stiffened functionally graded circular cylindrical thin shells under axial compression", Int. J. Mech. Sci., 74, 190-200.   DOI
30 Eringen, A.C. (1972), "On nonlocal elasticity", Int. J. Eng. Sci., 10, 1-16.   DOI
31 Esawi, A.M.K. and Farag, M.M. (2007), "Carbon nanotube reinforced composites: Potential and current challenges", Mater. Des., 28(9), 2394-2401.   DOI
32 Rogacheva, N. (1988), "Forced vibrations of apiezoceramic cylindrical shell with longitudinal polarization", J. Appl. Math. Mech., 52(5), 641-646.   DOI
33 Paliwal, D., Pandey, R.K. and Nath, T. (1996), "Free vibrations of circular cylindrical shell on Winkler and Pasternak foundations", Int. J. Press. Vessel. Pip., 69(1), 79-89.   DOI
34 Pan, Z.W., Dai, Z.R. and Wang, Z.L. (2001), "Nanobelts of semiconducting oxides", Science, 291(5510), 1947-1949.   DOI
35 Qian, D., Wagne,r G.J., Liu, W.K., Yu, M.F. and Ruoff, R.S. (2002), "Mechanics of carbon nanotubes", Appl. Mech. Rev., 55, 495-533.   DOI
36 Rahimi, G.H., Ansari, R. and Hemmatnezhad, M. (2011), "Vibration of functionally graded cylindrical shells with ring support", Scient. Iran. B, 18(6), 1313-1320.   DOI
37 Reddy, J.N. (2002), Mechanics of laminated composite plates and shells: Theory and analysis, 2nd Ed., CRC Press.
38 Shen, H.S. and Xiang, Y. (2012), "Nonlinear vibration of nanotube-reinforced composite cylindrical shells in thermal environments", Comput. Method. Appl. M., 213-216, 196-205.   DOI
39 Saito, R., Dresselhaus, G. and Dresselhaus, M.S. (1998), Physical properties of carbon nanotubes, Imperial College Press, London.
40 Song, X., Han, Q. and Zhai, J. (2015a), "Vibration analyses of symmetrically laminated composite cylindrical shells with arbitrary boundaries conditions via Rayleigh-Ritz method", Compos. Struct., 134, 820-830.   DOI
41 Song, X., Han, Q. and Zhai, J. (2015b), "Vibration analyses of symmetrically laminated compositecylindrical shells with arbitrary boundaries conditions via Rayleigh-Ritz method", Compos. Struct., 124, 820-830.
42 Iijima, S. (1991), "Helical microtubules of graphitic carbon", Nature, 354, 56-58.   DOI
43 Fazzolari, F.A. (2015), "Natural frequencies and critical temperatures of functionally graded sandwich plates subjected to uniform and non-uniform temperature distributions", Compos. Struct., 121, 197-210.   DOI
44 Haddadpour, H., Mahmoud khanim, S. and Navazi, H.M. (2007), "Free vibration analysis of functionally graded cylindrical shells including thermal effects", Thin Wall. Struct., 45(6), 591-599.   DOI
45 Hosseini-Hashemi, SH., Abaei, A.R. and Ilkhani, M.R. (2015), "Free vibrations of functionally graded viscoelastic cylindrical panel under various boundary conditions", Compos. Struct., 126, 1-15.   DOI
46 Jin, G., Ye, T., Chen, Y., Su, Z. and Yan, Y. (2013), "An exact solution for the free vibration analysis of laminated composite cylindrical shells with general elastic boundary conditions", Compos. Struct., 106, 114-127.   DOI