• 한국생산제조학회지
• /
• 제22권3_1spc호
• /
• pp.622-628
• /
• 2013

This paper describes the development of a thigh-muscle strength-assistance robot, which is a kind of wearable robot. For practicality and commercialization, we proposed three fundamental concepts: the reduction of the thigh-muscle strength, minimized degree of dependence on a powered actuator, and complete wearer safety. Based on these concepts, a spring and link bar mechanism was conceived as a novel idea. The movement of the thigh is transferred to the spring mechanism through the link bar; hence, the elastic force of the spring assists the thigh muscle. Using forse sensing resistor (FSR) sensors and a powered cam mechanism, the muscle assistance is automatically activated and deactivated according to the wearer's movement. The specific mechanisms of the robot are addressed in detail, and the effectiveness is verified by experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.484-489
• /
• 1998

In this paper, we examine the displacement characteristics of the parallel leaf spring mechanism with large-deflective elastic hinges, and the validity of this mechanism as a translational and rotational mechanism is confirmed with multi-input system. This study is focused on the linear driving force as an input force, which is applied to the large-deflective elastic mechanism, and the displacement characteristics are discussed with theoretically and experimentally. The motions of this mechanism due to large-deflective hinges are changed by the position of loading force regardless of a single driving force. The numbers of degree of freedom are increased with the hinges, and we can be used to a multiple driving force in order to obtain many types of Output.

• 한국기계가공학회지
• /
• 제6권3호
• /
• pp.85-91
• /
• 2007

This study was carried out to minimize the lifting force of a two hinge type stand mechanism. This unit is designed for the display devices in order to enhance the ergonomics for effective height adjustment and maintenance at any preferred position. The unit will be very useful for the mechanism fabricated with a coil spring and disc springs as a torque generator. The maximum and the minimum torque value should be calculated initially for the smooth lift. And the reasonable torque distribution is necessary to prevent any auto lift and auto dropping at any position because the torque generated by coil spring is more sensitive than disc spring in tilting the position. Therefore, the analysis of the coil spring is requisite to issue the specific torque value depending on the distorted angle with securing reliability of a long time storage condition. After the theoretical torque value was calculated, the evaluation was carried out by making a proto-type sample, then distorted angle was updated by experiment. The result of this study can readily be applied to various units for the optimization of the smooth lift.

• 동력기계공학회지
• /
• 제14권6호
• /
• pp.35-40
• /
• 2010

This article deals with the numerical analysis results of stiffness of diaphragm spring used in the clutch of a manual transmission. In order to investigate the relationship of the force and displacement in a diaphragm spring, we have established a numerical model of diaphragm spring using a well-known analytic model of Belleville spring and a cantilever beam model for the finger part of diaphragm spring. Using the stress and strain relations of Belleville spring and cantilever beam, we propose the analytic equation of motion of diaphragm spring for the use of a clutch automated actuator in an automated manual transmission. The proposed analytic model represents the typical dynamic characteristics of diaphragm spring along with the release bearing travel. And it is characterized in a closed-form equation, therefore it can be used for the further study of development of actuator and control law of clutch automating mechanism.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제34회 추계학술대회 개최
• /
• pp.245-251
• /
• 2001

A fretting wear tester is developed for experimental study on the fuel fretting problem of light water reactor. The feature of the developed tester is it can simulate the existence of gap between spring and fuel rod as well as different contacting force including the just-contact condition (0 N on the contact). Used are a servo-motor, an eccentric cylinder and lever mechanism for driving system. A spacer grid cell is constituted with four strap segments (each segment has a spring). This fretting wear tester can also be used as a fatigue tester of a spacer grid spring with the frequency of more than 10 Hz. It is required to simulate the frequency of the vibrating fuel rod due to flow-induced vibration in a reactor. In fretting wear test, up to two span-length of a fuel cladding tube can be accommodated. A specimen of cladding tube of one span-length is specially designed, which can be extended for two-span test. For .fatigue test, a device for clamping the spring fixture is installed additionally, Presently, the tester is designed for the condition of air environment and room temperature. The variation of the reciprocal distance is measured to check the stability of input force, which will be exerted to the cladding (for fretting wear. test) and the spring (for fatigue test) specimen.

• 로봇학회논문지
• /
• 제3권4호
• /
• pp.315-322
• /
• 2008

A new soft finger mechanism using a spring as a backbone is proposed in this work. It is a 4 DOF mechanism that consists of a spring and 3 cylinders, which behave like joints with 3 up-and-down rotations and 1 left-and-right rotation. To control each joint, cylinders have small holes in their cross-sectional areas, and wires of different length are penetrated into these holes. We can control each joint by pulling the corresponding wire. The forward kinematics is solved by using the geometry of mechanism. And the relationship (Jacobian) between the linear velocity of the wires and the joint angular rate is obtained. A virtual simulator is developed to test the validity of the kinematic model. In the experiment, first, the position control is conducted by tracking a given trajectory. Second, to verify the flexibility and safety, we show that the soft finger deflects in a safe manner, in spite of the collision with environment.

• 제어로봇시스템학회논문지
• /
• 제22권9호
• /
• pp.733-737
• /
• 2016

In this paper, we propose a mechanism that can compensate for gravity in a robot manipulator. Industry robots generate torque due to carrying heavy weight. For this reason, the robots need high specification motors, which increases the prices of the robots and their production costs. In order to resolve these problems, a mechanism for gravity compensation has been developed using a spring and wire system. But this system has problems related to wire stretching. A winding mechanism is therefore used to supplement this drawback of the wire. The robot used was developed by the 1-DOF system. Analysis was performed for the performance of the mechanism. Experiments were conducted to compare simulation results and experimental results.

• 한국산업융합학회 논문집
• /
• 제26권6_1호
• /
• pp.993-999
• /
• 2023

In this paper, a novel polishing tool mechanism with 3-axis compliance is presented, which consists of 2-axis rotational and 1-axis linear compliances in series. The 2-axis rotational compliance mechanism is made up of four cantilever beams for adjusting rotational stiffness and one flexure universal joint at the center for constraining the z-axis deflection. The 2-axis rotational compliance can mechanically adjust the polishing tool to machined surfaces. The polishing press force can be simply controlled by using a linear spring along the z-axis. The 2-axis rotational and 1-axis linear compliance design is decoupled. The stiffness analysis of the 2-axis compliance mechanism was performed based on link compliance matrix and rigid body transformation. A 3-axis polishing tool was designed by configuring the 2-axis compliance mechanism and one linear spring.

• 대한기계학회논문집A
• /
• 제36권11호
• /
• pp.1405-1411
• /
• 2012

위험지역에서의 작업을 위하여 전세계적으로 원격조작기가 널리 활용되고 있다. 특히 원격 시스템의 경우, 운영되는 환경의 특징상 안정적인 성능이 담보되어야만 하며, 조작기 몸체의 경량화 및 운용환경 외부에서의 유지보수 편리성을 위하여 구동부를 시스템의 기저부에 집중시킬 수 있는 장력구동방식 메커니즘이 주로 활용되고 있다. 본 연구에서는 장력구동 방식 원격조작기에 적용하기 위한 그리퍼 탄성 구동부의 설계를 위해 시도된 접근법을 소개하고자 한다. 제시된 그리퍼 시스템은 기본적으로 스프링 메커니즘에 기반을 둔 4 절 링크형 구조를 가지고 있으며 마스터 조작자에 의해 동작되는 슬레이브 조작기의 말단부에 결합되는 구조를 가진다. 본 논문에서는 이러한 조작기의 요구사항에 맞는 그리퍼의 파지력 및 복원력을 재현하기 위하여 그리퍼 상에서의 적정 스프링 결합위치 및 요구강성과 그에 따른 운동학적 영향계수 등을 분석 및 고찰하였다. 최종적으로는 이러한 분석내용들을 바탕으로, 실제 그리퍼 시스템에 적용함으로써 타당성을 검증하였다.

• 한국정밀공학회지
• /
• 제18권10호
• /
• pp.194-199
• /
• 2001

In this paper, we propose a new locomotive mechanism using impulsive force for microcapsule-type endoscope. It has the compact size for movement in the colon and actuating mechanisms for hi-directional movement. The actuating mechanism resembles a pneumatic cylinder and consists of body, inertia mass(piston). spring. pneumatic source and calve. When valve is ON, the pneumatic impulsive force between piston and body drives them in two opposite direction. As the air in the body is passed away, the contrary movements are occurred by spring reaction. Therefore, the direction of body's motion is determined by the relative magnitude of two opposite impulsive forces, i.e., pneumatic and spring force. The effect of two impulsive forces can simply be controlled by On-Off time of solenoid valve.