• Journal of the Earthquake Engineering Society of Korea
• /
• v.20 no.5
• /
• pp.301-310
• /
• 2016

There are differences in seismic behavior between non-skewed bridges and skewed bridges due to in-plane rotations caused by pounding between the skewed deck and its abutments during strong earthquake. Many advances have been made in developing design codes and guidelines for dynamic analyses of non-skewed bridges. However, there remain significant uncertainties with regard to the structural response of skewed bridges caused by unusual seismic response characteristics. The purpose of this study is performing non-linear time history analysis of the bridges using abutment-soil interaction model considering pounding between the skewed deck and its abutments, and analyzing global seismic behavior characteristics of the skewed bridges to assess the possibility of unseating. Refined bridge model with abutment back fill, shear key and elastomeric bearing was developed using non-linear spring element. In order to evaluate the amplification of longitudinal and transverse displacement response, non-linear time history analysis was performed for single span bridges. Far-fault and near-fault ground motions were used as input ground motions. According to each parameter, seismic behavior of skewed bridges was evaluated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.12
• /
• pp.2353-2363
• /
• 1994

This paper is concerned with the design of a robust digital controller using reduced-order observer on a robotic manipulator under the disturbance. In most cases of robotic manipulator since all state vectors are not measurable, the unmeasurable state vectors must be estimated or reconstructed. Other problems are caused by the nonlinear element like as nondifferentiable Coulomb friction, disturbance due to the gravitational pull, and the torsional spring effect of a link between the drive motor and the manipulator arm. The controller is based on feeding back the observable variables and the estimated state variables which are generated by the observer, and augmenting the system by additional discrete integrators. The feedback gain parameters are obtained by first applying the optimal control theory and then readjusting the feedback parameters to eliminate the limit cycle by using describing Function for nonlinear hybrid system.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.6
• /
• pp.642-649
• /
• 2015

Resistance Spot Welding (RSW) is the method for joining two overlapped base materials when high pressure and current is applied from electrodes. Due to the safety problem such high pressure and voltage, automation should be early adopted. In this paper, the spot welding is developed as a computational model of wheel house from GM Korea and the welding condition such as weld sequence is considered. The computational analysis is preceded as a static and elasto-plastic procedure and used thermal expansion coefficient represents a dependency of spot volume between two panels. In case of welding sequence, the efficiency which depends on the distance between current spot point and the other is calculated in several cases.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.244-247
• /
• 2005

Although several artificial disc designs have been developed for the treatment of discogenic low back pain and used clinically, biomechanical change with its implantation seldom studied. To evaluate the effect of artificial disc implantation on the biomechanics of lumbar spinal unit, nonlinear three-dimensional finite element model of L1-L5, S1 was developed and strain and stress of vertebral body and surrounding spinal ligaments were predicted. Intact osteoligamentous L1-L5, S1 model was created with 1-mm CT scan of a volunteer and known material property of each element were applied. This model also includes the effect of local muscles which was modeled with pre-strained spring elements. The intact model was validated with reported biomechanical data. Two models implanted with artificial discs, SB Charite or Prodisc, at L4/5 via anterior approach were also developed. The implanted model predictions were compared with that of intact model. Angular motion of vertebral body, force on spinal ligaments, facet joint contact force with $2\sim12$ Nm flexion-extension moment.

• Asian Journal of Turfgrass Science
• /
• v.9 no.3
• /
• pp.173-185
• /
• 1995

Hydroseeding technique is a very popular method of revegetating slope areas through the control of soil erosion and stability by seeding grasses. This study was conducted to select turfgrass species and cultivars for hydroseeding. Experiment plots were established on various soil types and environmental conditions at Singar-Ansan high-way construction site. The investigation was designed in three cutting, one back-filling and other three spare sites with various seed mixtures. Results indicated that combinations of seed mixtures influenced seed germination and rates of surface cover. In a view of long term, vegetation shifts should be influenced by characters of slopes and micro-climate conditions. Hydroseeding did not show good results on rocky slope areas. Revegetation was only going on where there had soil. The combination of seed mixture with a higher rate of perennial ryegrass had relatively good revegetation with faster germination and seedling growth. Improved turf-type tall fescue Arid ⓡ and Falcon ⓡ seemed to have good environ-mental adaptation and drought tolerance. Wild or old type cultivars showed relatively slow green-up in spring and growth rates at the next year of seeding. For the harmonious landscaping with surrounding area, the combination of native grass mixture with cool-season grasses had good results. Slow and low revegetation rate at hack-filling site seemed to be caused by the poor development of capillary tubes in sub-soil. It was shown that a high correlation between seed germination and revegetation rate, and between three-month later coverage rate and final rate. The evaluation of coverage rate after three month seems to he acceptable to decide the accomplishment of hydroseeding results on rode side slopes.

• Transactions of Materials Processing
• /
• v.31 no.4
• /
• pp.186-193
• /
• 2022

The application of UHSS sheet is being expanded up to 50% to reduce the weight of automobiles and improve safety. However, due to the high strength and low elongation of the ultra-high tensile strength steel sheet, product defects such as spring back and mold defects such as cracks and chippings also occur. In this study, Pin/Ring on Disc and Spiral wear tests were conducted to evaluate the durability of Ti/Cr-coated molds for forming 1.2GPa grade UHSS sheets. Component analysis and thickness were measured for each coating layer, and hardness and adhesion were investigated to determine mechanical properties. Combining the results of various wear tests, it was found that the TiAlN coating had the best wear and sticking resistance.

• Journal of Environmental Science International
• /
• v.31 no.12
• /
• pp.1039-1050
• /
• 2022

Forests are valuable natural resources for people living around the mountains. In particular, the comfortable feeling or healing is one of the most important benefits obtained from forests. This healing can be possible by many aspects of forests, including the landscape, natural sounds, anions, and pleasant aromas. We focused on the volatile organics from forest causing pleasant aromas, phytoncides. Twenty phytoncides were monitored from February to September in a national tree garden (BaekDoDaeGan SooMokWon). Five sites were monitored two times per month and 20 phytoncides were detected. Borneol showed the highest annual average concentration and the order of concentration was borneol > mycene > sabinene > limonene > α-pinene. The average phytoncide concentration was relatively high in spring and summer season when the trees were physiologically active. Daily monitoring showed that the afternoon hours had higher concentrations of phytoncides than the morning hours, which may be due to the stabilized atmospheric conditions at the sites. Among the five sites, coniferous forests gave higher phytoncide emissions than broadleaf tree forests. The current study showed that forests produce several phytoncides that cause a healing effect and a forest bath may be beneficial to the health of visitors to forests.

• Journal of Sericultural and Entomological Science
• /
• v.13 no.2
• /
• pp.81-94
• /
• 1971

This research is conducted to study the effect to rebbuding, death atop, yielding and occurrence of twig blight disease with the interemediate cutting periods of mulberry branch and at the picking levels of leaf remains in autumn. The results obtained are as follows: 1. Re-budding branches are decreased with delaying of interval cutting period, and that more leaves remained lesser both re-budding branches and buds are observed. Therefore, it is better that leaves remained are placed on the upper part of branch, practically with 3-5 leaf remains. It has decreased re-budding branches, in case cutting is conducted in Sept. 20 with picking leaving 3-5 leaf on. 2. With regard that all picking increases the percentage of death atop of the branch and upper half part picking increases slightly over the other treats. Although it seems unlikely to be different in the other treats with cutting period, exception of all picking, it is elucidated better that the all picking after cutting in Sept. 15 represents unusually high, seemingly effected by the temperature contition preferable to the life of twig blight disease along with the lack of branch nutrition caused by the all picking. 3. In view of yielding, it has no difference in autumn yielding with cutting period, but more picking levels of leaf remains, more yielding. In spring yield, both no picking and all picking is the lowest, in spite of cutting period. Each treat produces high yielding except the no picking if rutting is done in Sept. 15 and Sept. 20, respectively; otherwise it is done earlier or later, each treat produces low yielding. It is suggested that yielding ability in following spring affected by the autumn picking because all picking treats represent lower yielding ability than no picking ones except of cutting in Sept. 15 and Sept. 20. With respect to total yield in spring and autumn, it is represented that other treats, among which cutting in Sept. 15 and Sept. 20 is especially high, produce higher yielding than both no picking and all picking. But no difference seemed in leaf remained treats. In these respects, it may be concluded that 3-5 leaf remains after the interval cutting in Sept. 15 to Sept. 20 increases the yielding throughout two seasons and it is suggested that 3-5 leaf remains after cutting in Sept. 5 to Sept. 10 has no difference with no picking and cutting after that day. 4. Diseases in the branch remained are twig blight, massaria-bye, and Die-back, of which twig blight attacks tremendously and slight ouurence in messaria-byo and Die-back. In ouurence of twig blight, it is appeared much in all picking and seasonal occurence high in Sept. 15 with 92.9, and in Sept. 30 with 100 as index, respectively. Also it occurs ,considerably in upper part picking but little occurrence in no picing. 5. It is considered that negative correlation among re-budding percentage. No. of re-budding leaf, and spring yielding is found, seemingly without heavy correlation at -0.42, and -0.27, respectively. However, death atop of branch and occurence of twig blight has little correlation with spring yield. On the other hand, positive correlation highly appeared with the correlation coefficient at 0.8 between occurence of twig blight and death atop of branch.

• Journal of the Korean association of regional geographers
• /
• v.13 no.1
• /
• pp.32-42
• /
• 2007

In Sagye coast of Andeok-myeon, southwestern Jeju, shore platform of noncohesive Hamori Formation, marine terrace deposit of round gravels, coastal dune composed of shell sand and volcanic sand, and back lake are linked closely with each other. In this paper, the formation process of Sagye coastal geomorphic system analysed by using OSL dating method is as follows: Firstly, Hamori Formation is a horizontal stratum filed up of tuff reworked by submarine volcanic eruption during 3$\sim$7.6 ka BP. Hollow at the boundary between Hamori Formation' flat and Kwangheak Basalt's gentle slope become a back lake when block is appeared over the sea level by uplift. Secondly, while Hamori Formation was laid below sea level, gravels which had been broken and abraded at southwestern rocky coast composed of Kwangheak basalt or been transported through the small stream from adjacent hillslope were deposited in rapid flow environment. Thirdly, deposition of round gravels was ceased by earth uplift, and shore platform was constructed by abrasion process of energy of swash moving forward. As altitude of shore platform is equal to high tidal level of spring tide, compared it with present high tidal level of study area, earth is uplifted about 105m since shore platform was formed. Fourthly, much sandy sediments transported from offshore bottom covered shore platforms and marine terrace deposits. Lighter sediments among sandy sediments was blown to back, formed secondary sand dune since about 500 year.

• 한국해양학회지
• /
• v.30 no.5
• /
• pp.403-412
• /
• 1995

The present study was performed to determine th growth and production of Mactra veneriformis on the Songdo tidal flat off Inchon. west coast of Korea. Monthly samples were collected from Marc 1989 to September 1990. The size distributions of shell length showed unimodal patterns from March to August 1989. The binodal pattern after September 1989 indicated a recruitment of young clams during this period. The density fluctuated irregularly, but showed a decreasing pattern over time on the whole. The density of the year class 1989 increased markedly after February 1990. The growth in shell length showed three phases during a year, a fast growth phase in spring, a slow growth phase in summer and autumn, and a lag phase in winter. The annual increment in shell length reduced with age. The flesh dry weight showed a peak in late spring just before the spawning period, and another peak in autumn. The length of annuli and the back-calculated flesh dry weight were used to describe the annual growth. The growth in shell length fitted to the von Bertalanffy model and the flesh dry weight to the Gompertz model. The absolute growth rate of the shell length reduced gradually with age. The year class 1985 had the highest L, and the yeat class 1986 the lowest L. The annual growth in weight showed a typical sigmoid curve. The growth rate was maximum at the age of 2 to 3. Year classes of 1984 and 1985 had higher values of W and higher absolute growth rates than those of 1986 and 1987. Maximum absolute growth rates of 1986 and 1987 year classes were recorded at younger ages than 1984 and 1985 year classes. The annual relative growth rates of length and weight decreased exponentially with age. Biomass in flesh dry weight increased till spring and thereafter decreased progressively. Maximum biomass was 134.6g m/SUP -2/ in August 1990. The biomass of 1989 yeat class occupied highest proportion in total biomass. Annual production in flesh dry weight from March 1989 to March 1990 was 67.9 g m/SUP -2/ year/SUP -1/. Cumulative production of 1989 year class was highest among all year classes, and that of year class 1984 was lowest. The production is high in spring and autumn, and very low in summer and winter.