• Journal of the Korean Society for Heat Treatment
• /
• v.25 no.1
• /
• pp.6-13
• /
• 2012

HVOF thermal spray coating of 80%WC-CoFe powder is one of the most promising candidate for the replacement of the traditional hard chrome plating and hard ceramics coating because of the environmental problem of the very toxic $Cr^{6+}$ known as carcinogen by chrome plating and the brittleness of ceramics coatings. 80%WC-CoFe powder was coated by HVOF thermal spraying for the study of durability improvement of the high speed spindle such as air bearing spindle. The coating procedure was designed by the Taguchi program, including 4 parameters of hydrogen and oxygen flow rates, powder feed rate and spray distance. The surface properties of the 80%WC-CoFe powder coating were investigated roughness, hardness and porosity. The optimal condition for thermal spray has been ensured by the relationship between the spary parameters and the hardness of the coatings. The optimal coating process obtained by Taguchi program is the process of oxygen flow rate 34 FRM, hydrogen flow rate 57 FRM, powder feed rate 35 g/min and spray distance 8 inch. The coating cross-sectional structure was observed scanning electron microscope before chemical etching. Estimation of coating porosity was performed using metallugical image analysis. The Friction and wear behaviors of HVOF WC-CoFe coating prepared by OCP are investigated by reciprocating sliding wear test at $25^{\circ}C$ and $450^{\circ}C$. Friction coefficients (FC) of coating decreases as sliding surface temperature increases from $25^{\circ}C$ to $450^{\circ}C$.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.22 no.1
• /
• pp.1-4
• /
• 2011

This study was conducted to test the use of colored cocoon silkworm, Golden Silk, as a host for the fruiting body production of Cordyceps mushroom. Golden Silk variety had a shorter larval period than Yangwonjam at $25.3^{\circ}C$ and 78.5% RH: The average larval period of the Golden Silk was 24 days and 7 hr, and that of the Yangwonjam was 24 days and 15 hr. In the infection test of I. tenuipes on silkworm, the larval period of normal silkworms was longer than the silkworms inoculated with I. tenuipes in both Golden Silk and Yangwonjam. The pupae survival percentage of Golden Silk was 94.4%, whereas it was 91.9% in Yangwonjam. Golden Silk had a higher pupation rate than Yangwonjam. The pupation rate of normal silkworms was about 5% higher than that of silkworms inoculated with I. tenuipes. Infection rate of I. tenuipes into larvae of 5th instar newly exuviated silkworm was 93.8% in Golden Silk, and 96.9% in Yangwonjam. Synnemata production of I. tenuipes was better in Yangwonjam with an incidence rate of 99.8% than Golden Silk with 98.6%. The average synnemata weight of Golden Silk was 1.12 g and that of Yangwonjam 1.29 g. Golden Silk had a lower synnemata weight than Yangwonjam. But no significant difference was observed in synnemata weight varieties. The synnemata of I. tenuipes produced on pupae were white or milky-white in color, and similar in shape and color to wild synnemata collected in Korea.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.8
• /
• pp.1183-1196
• /
• 2018

Objective: This study ascertained effects of roughage quality, period of day at meal termination and time lapse after feeding on digesta load in the rumen. Methods: Veld hay was untreated (poor roughage quality, PRQ), improved (improved roughage quality, IRQ) by treating with urea or semi-improved by spraying with urea (semi-improved roughage quality, SIRQ). Experiment 1a used four rumen fistulated sheep to determine in-sacco degradability. Twelve sheep ($56.3{\pm}4.59kg$) were blocked by weight and randomly allocated to IRQ (n = 6) and PRQ (n = 6) to determine solid and liquid passage rates. In experiment 1b, nine sheep ($37.6{\pm}9.34kg$) were blocked by weight and randomly allocated to IRQ (n = 4) and PRQ (n = 5) to determine digestibility. Sixteen sheep ($36.47{\pm}9.46kg$) were blocked by body weight and randomly allocated to IRQ (n = 8) and PRQ (n = 8). Two sheep were slaughtered for each sampling time in each treatment (IRQ and PRQ) at 0, 6, 12, and 24 h after feeding to determine rumen load. In experiment 2, eighteen goats ($25.4{\pm}9.08kg$) were blocked by weight and randomly allocated to IRQ (n = 6), SIRQ (n = 6), and PRQ (n = 6). Then all 18 goats were slaughtered soon after meal termination in the morning; afternoon and evening to determine the effect of period of day on rumen fill. Results: Rate of degradation and effective degradability were enhanced by improvement of roughage quality. Roughage quality had no effect on digestibility, but digestibility was higher in goats than sheep. Fractional passage rate of particles was higher for IRQ than PRQ, but similar for liquids. Digesta fractional clearance rates at 24 h after feeding were 0.018/h (IRQ) and 0.006/h (PRQ). Period of day had an influence on rumen load. Neutral detergent fibre load for goats were above 2.03 kg/100 kg body weight for all diet treatments. Conclusion: Following starvation, passage rate had negligible effects on emptying of rumen load.

• Korean journal of applied entomology
• /
• v.40 no.1
• /
• pp.51-58
• /
• 2001

Entomopathogenic fungus, Paecilomyces japonicus, has been commercially used as medicinal purpose . The silkworm, Bombyx mori, as an optimal host for the fungi, has been selected and used for the production of the fungal fruit bodies. In current method, newly molted fifth instal larvae should be exposed to the adverse stress environment of high temperature (3$0^{\circ}C$), high relative humidity ( 90%), and starvation for 24h for better fungal inoculation to the host insects. In this study, an alternative method using chemical agent, dexamethasone (DEX: an eicosanoid biosynthesis inhibitor), was tried to get the immunodepressive effect on the larvae to elevate the inoculation rate of the fungi to the silkworm without any harsh rearing environment. DEX (100$\mu\textrm{g}$) showed significantly synergistic effect on the hemocyte lethality of the fungus, and was effective to decrease cellular immune responses measured by the number of hemocyte microaggregation and phenoloxidase activity of the fifth instar larvae in response to the fungal injection. A detergent of 0.05% Triton-X was effective to increase the in- oculation rate of the fungi to the larvae and used in all fungal spraying solutions. Without any environ- mental stress treatment, only DEX (100$\mu\textrm{g}$) injection to the fifth instar larvae followed by the fungal spray was effective to get the inoculation rate equivalent to the current fungal spray method requiring harsh rearing environment. These results suggest that the inoculation of P. japonicus can be elevated by the help of DEX and that the silkworms use eicosanoids to elicit cellular immune response against fungal pathogen.

• Journal of Bio-Environment Control
• /
• v.14 no.1
• /
• pp.29-37
• /
• 2005

In order to provide fundamental data on utilization of dehumidifier in greenhouses, a condensing type dehumidifier using ground water as a coolant was developed and tested dehumidification performance. The developed dehumidifier was applied to greenhouse with fog cooling system and effect of dehumidification on improvement of evaporative cooling efficiency was analyzed. Results of the dehumidifier performance test showed that dehumidification using ground water as a coolant was sufficiently possible in fog cooling greenhouse. When the set point temperature of greenhouse cooling was $32^{\circ}C$ and as temperatures of ground water rose from $15^{\circ}C\;to\;18^{\circ}C,\;21^{\circ}C\;and\;24^{\circ}C$, dehumidification rates decreased by $17.7\%,\;35.4\%\;and\;52.8\%$, respectively. As flow rates of ground water reduced to $75\%\;and\;50\%$, dehumidification rates decreased by $12.1\%\;and\;30.5\%$, respectively. Cooling efficiency of greenhouse equipped with fog system was distinctly improved by artificial dehumidification. When the ventilation rate was 0.7 air exchanges per minute, dehumidification rates of the fog cooling greenhouse caused by natural ventilation were 53.9%-74.4% and they rose up to 75.4%-95.9% by operating the dehumidifier. In case of using the ground water of $18^{\circ}C$ and flow rate of design condition, it was analyzed that whole fog spraying water can be dehumidified even if the ventilation rate is 0.36 exchanges per minute. As a utilization of dehumidifier, it is possible to improve cooling efficiency of fog system in naturally ventilated greenhouses.

• Journal of Bio-Environment Control
• /
• v.21 no.2
• /
• pp.140-146
• /
• 2012

The commercial product "pyto-patch" prepared as nano sized silver particle less than 5 nm, has effective antifungal activity against Collectotrichum gloeosporioides, Botrytis cinerea, Sclerotinia sclerotiorum in vitro. As a fungal growth inhibiton mechanism, it can reduce spore germination rate and mycelial growth. As s promising fungicide, Phyto-patch can control anthracnose effectively. The spore of C. gloeosporioides dipped in 5 ppm phyto-patch dilute suppressed germination rate to 13.2%, and mycelial growth stopped for 15 days at 10 ppm. The spore postinoculated on 10 ppm phyto-path smeared PDA surface could not germinate for 3 days and prohibit pathogen infection effectively. In field test, the anthracnose development of 4 ppm phyto-patch treated plot was less than 7% after 21 days compaired to 40% of it in untreated plot. In heavy rainfall season, pepper anthracnose effectivly contrrolled by regular 10 ppm phytopatch spraying every 7 days. The diseased pepper fruit decreased to 5.8% compaired to 94.6% in untreated plot. During drying period, the diseased pepper fruit havested in phyto-patch treated plot was 24.2%, but pepper fruit havested in untreated plot destroyed to 100% within 3 days. The nano silver particle coated on multching textile prevented late blight of pepper effectively and disease occurance delayed about month.

• Polymer(Korea)
• /
• v.31 no.3
• /
• pp.215-220
• /
• 2007

The control of the surface energy by electrohydrodynamic force provides electrospraying with various potential advantages such as simple particle size control, mono-dispersity, high recovery, and mild processing conditions. The advantages are quite helpful to improve the stability of protein drug and control its release. Herein, the nano-encapsulation of protein drugs using electrospraying was investigated. Albumin as a model protein was processed using uniaxial and co-axial electrospraying, and chitosan, polycaporlactone (PCL), and poly (ethylene glycol) (PEG) were used as encapsulation materials. The major processing parameters such as the conductivity of spraying liquids, flow rate, the distance of electrical potential gradient, etc were measured to obtain the maximum efficiency. In the chitosan systems, mean particles size decreases as flow rate and the distance between nozzle and the collecting part decreases. In the uniaxial technique of the PCL systems, mean particles size decreases as flow rate decreases. In the coaxial technique of the PCL systems, it was found that the particles size gets larger under the application of the higher ratio of inner-to-outer liquid flow rates. The primary particles formed out of an electrospraying nozzle showed narrow particle size distribution, but once they arrived to the collecting part, aggregation behavior was observed obviously. Efficient nano-encapsulation of albumin with PCL, PEG, and chitosan was conveniently achieved using electrospraying at above 12 kV.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.28 no.2
• /
• pp.80-84
• /
• 2018

Mg alloys AZ31 and AZ91 were Plasma-Electrolytic-Oxidized in Na-P and Na-Si system electrolyte at various concentration, applied voltage and time. Thickness and surface roughness of PEO coating were examined. Salt spraying test were carried out to compare their corrosion resistances. Generally, corrosion resistances rate were increased as thickness and crystallinity increasing. Size of pore being larger, long term corrosion resistance decreased. It is turned out that $Mg_2SiO_4$ and other crystalline phase rather than MgO might be increase corrosion resistance dramatically.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.5
• /
• pp.617-627
• /
• 2006

Statement of problem: HA has been used as a coating material on Ti implants to improve osteoconductivity. However. it is difficult to form uniform HA coatings on implants with complex surface geometries using a plasma spraying technique. Purpose : To determine if Ti6Al4V sintered porous-surfaced implants coated with HA sol-gel coated and hydrothermal treated would accelerate osseointegration. Materials and Methods : Porous implants which were made by electric discharge were used in this study. Implants were anodized and hydrothermal treatment or HA sol-gel coating was performed. Hydrothermal treatment was conducted by high pressure steam at $300^{\circ}C$ for 2 hours using a autoclave. To make a HA sol, triethyl phosphite and calcium nitrate were diluted and dissolved in anhydrous ethanol and mixed. Then anodized implant were spin-coated with the prepared HA sols and heat treated. Samples were soaked in the Hanks solution with pH 7.4 at $37^{\circ}C$ for 6 weeks. The microstructure of the specimens was observed with a scanning electron microscope (SEM), and the composition of the surface layer was analyzed with an energy dispersive spectroscope (EDS). Results : The scanning electron micrographs of HA sol-gel coated and hydrothermal treated surface did not show any significant change in the size or shape of the pores. After immersion in Hanks' solution the precipitated HA crystals covered macro- and micro-pores The precipitated Ca and P increased in Hanks' solution that surface treatment caused increased activity. Conclusion : This study shows that sol-gel coated HA and hydrothermal treatment significantly enhance the rate of HA formation due to the altered surface chemistry.

• The Korean Journal of Community Living Science
• /
• v.17 no.4
• /
• pp.49-56
• /
• 2006

The purpose of this study was to evaluate the thermal and subjective comfort of various pesticide-proof clothes made from different material. Seven male adults took part in the study, conducted in a climate-chamber controlled with an ambient temperature of $30^{\circ}C$ and a relative humidity of 60%RH. The thermal and subjective responses of subjects wearing pesticide-proof clothing made of Goretex(coating treatment), polyester (water-repellent treatment), non-woven(coating) and nylon(coating) were measured. The main results were summarized as follows: (1) Change of rectal temperature and clothing microclimate were inhibited more effectively in pesticide-proof clothing made of Goretex, polyester and non-woven than nylon materials. (2) Mean skin temperature at the end of the experiment was significantly higher in subjects who wore nylon than non-woven and Goretex, and was lowest in those with pesticide-proof clothing made of polyester. (3) Change of heart rate was significantly lower in subjects with Goretex and polyester clothiing than those with non-woven, and in those with nylon, it was highest. (4) Subjective comfort was greater in subjects with Goretex, polyester and nonwoven clothing than nylon, except for thermal sensation. Thermal sensation was greater in order of polyester, Goretex, non-woven and nylon. Thus, it was concluded that pesticide-proof clothing made of Goretex, polyester and non-woven material could reduce thermal stress during the spraying of pesticides in summer.