• 제목/요약/키워드: Spray Injection

검색결과 920건 처리시간 0.028초

저온 분사를 이용한 Cu계 비정질 코팅층의 제조 및 특성 연구 (Fabrication and Characterization of Cu-based Amorphous Coatings by Cold Spray Process)

  • 정동진;박동용;이진규;김형준;이기안
    • 대한금속재료학회지
    • /
    • 제46권5호
    • /
    • pp.321-327
    • /
    • 2008
  • Cu based amorphous ($Cu_{54}Zr_{22}Ti_{18}Ni_6$) coating was produced by cold spraying as a new fabrication process. The microstructure and macroscopic properties of amorphous coating layer was investigated and compared with those of cold sprayed pure Cu coating. Amorphous powders were prepared by gas atomization and Al 6061 was used as the substrate plate. X-ray diffraction results showed that Cu based amorphous powder could be successfully deposited by cold spraying without any crystallization. The Cu based amorphous coating layer ($300{\sim}400{\mu}m$ thickness) contained 4.87% porosity. The hardness of Cu based amorphous coating represented $412.8H_v$, which was correspond to 68% of the hardness of injection casted bulk amorphous material. The wear resistance of Cu based amorphous coating was found to be three times higher than that of pure Cu coating. The 3-point bending test results showed that the adhesion strength of Cu based amorphous coating layer was higher than that pure Cu coating. It was also observed that hard Cu base amorphous particle could easily deform soft substrate by particle collisions and thus generated strong adhesion between coating and substrate. However, the amorphous coating layer unexpectedly represented lower corrosion resistance than pure Cu coating, which might be resulted from the higher content of porosity in the cold sprayed amorphous coating.

리스크 완화를 위한 Wet Scrubber 세정수 pH의 효율적 관리 (Efficient Management of the pH of the Wet Scrubber Washing Water for Risk Mitigation)

  • 주동연;서재민;김명철;백종배
    • 한국안전학회지
    • /
    • 제35권6호
    • /
    • pp.85-92
    • /
    • 2020
  • Wet Scrubber reacts the incoming pollutant gas with cleaning water (water + absorbent) to absorb pollutants and release the clean air to the atmosphere. Wet scrubbers and packed tower scrubbers using this principle are widely used in businesses that emit acid gases. In particular, in the etching process using hydrochloric acid (HCl), alkaline washing water (NaOH) having a pH of about 8 to 11 is used to absorb a large amount of acid gas. However, These salts are attached to the injection nozzle (nozzle), filling material (packing), and the demister (Demister), causing air pollution, human damage, and inoperability due to clogging and acid gas discharge. Therefore, In this study, an improvement plan was proposed to manage the washing water with pH 3~4 acidic washing water. The test method takes samples from the Wet Scrubber flue measurement laboratory twice a month for 1 year. Hydrogen chloride (HCl) concentration (ppm) was measured, and nozzle clogging and scale conditions were measured, compared, and analyzed through a differential pressure gauge and a pressure gauge. As a result of the check, it was visually confirmed that the scale was reduced to 50% or less in the spray nozzle, filler, and demister. In addition, the emission limit of hydrogen chloride in accordance with the Enforcement Regulation of the Air Quality Conservation Act [Annex 8] met 3 ppm or less. Therefore, even if the washing water is operated in an acidic pH range of 3 to 4, it is expected to reduce air pollution and human damage due to clogging of internal parts, and it is expected to reduce maintenance costs such as regular cleaning or replacement of parts.

T-GDI 엔진의 속도 및 하중이 블로우바이 가스의 오일입자 크기와 오일분리기 성능에 미치는 영향에 대한 실험 및 수치적 연구 (Experimental and Numerical Investigation of the Effect of Load and Speed of T-GDI Engine on the Particle Size of Blow-by Gas and Performance of Oil Mist Separator)

  • 정수진;오광호
    • 한국분무공학회지
    • /
    • 제25권4호
    • /
    • pp.162-169
    • /
    • 2020
  • The worldwide focus on reducing the emissions, fuel and lubricant consumption in T-GDI engines is leading engineers to consider the crankcase ventilation and oil mist separation system as an important means of control. In today's passenger cars, the oil mist separation systems mainly use the inertia effect (e.g. labyrinth, cyclone etc.). Therefore, this study has investigated high efficiency cylinder head-integrated oil-mist separator by using a compact multi-impactor type oil mist separator system to ensure adequate oil mist separation performance. For this purpose, engine dynamometer testing with oil particle efficiency measurement equipment and 3D two-phase flow simulation have been performed for various engine operating conditions. Tests with an actual engine on a dynamometer showed oil aerosol particle size distributions varied depending on operating conditions. For instance, high rpm and load increases bot only blow-by gases but the amount of small size oil droplets. Submicron-sized particles (less than 0.5 ㎛) were also observed. It is also found that the impactor type separator is able to separate nearly no droplets of diameter lower than 3 ㎛. CFD results showed that the complex aerodynamics processes that lead to strong impingement and break-up can strip out large droplets and generate more small size droplets.

농업용 멀티콥터를 활용한 무인항공기용 작물보호제 살포양상에 대한 상용노즐별 차이 (Comparison of Each Commercial Nozzle on the Application Pattern of Pesticide for Unmanned Aerial Vehicles (UAV))

  • 박부용;정인홍;김선우;김길하
    • 한국응용곤충학회지
    • /
    • 제60권2호
    • /
    • pp.229-234
    • /
    • 2021
  • 본 연구에서는 멀티콥터를 이용한 무인항공용 방제약제 살포시 사용하는 상용 노즐에 3가지 타입에 따른 살포양상과 피복도를 조사하였다. 처리구에 플루페녹수론·메타플루미존(flufenoxuron+metaflumizone) 액상수화제와 비펜트린(bifenthrin) 유제를 살포하고난 뒤, 살포 약제의 낙하입자를 감수지를 이용하여 측정하고 감수지의 피복도를 조사하였다. 낙하입자 분석결과 풍속의 차이에 따라 노즐별 낙하입자 균일도에 차이를 보였으며 제형별 차이는 없었다. 노즐별 분사량은 공식 제공정보와 실제 분사량에 차이를 보였다. 이 결과들은 무인항공기 이용 농업현장방제 및 약제등록시험 가이드라인 설정에 근거자료로 활용될 수 있을 것이다.

2기통 소형 터보가솔린엔진에서 배기 밸브 타이밍 제어에 따른 LIVC, EIVC 상태에서의 엔진 효율 영향 (Effect of Controlling Exhaust Valve Timing on Engine Efficiency in LIVC and EIVC States in a 2-Cylinder Small Turbo Gasoline Engine)

  • 장진영;우영민;신영진;고아현;정용진;조종표;김강출;표영덕;한명훈
    • 한국분무공학회지
    • /
    • 제27권3호
    • /
    • pp.117-125
    • /
    • 2022
  • This study examines whether engine fuel efficiency is improved by optimization of the exhaust valve timing in a state where the intake valve timing has been optimized in a small turbo gasoline engine that has intake cams and exhaust cams with fixed valve opening periods. When the exhaust valve is opened late, the expansion stroke is longer, and the efficiency can be improved. A 2-cylinder turbo gasoline engine with 0.8 liters of displacement and an MPI (Multi Point Injection) fuel system was used. The engine was operated at 1,500 and 3,000 rpm, and the load conditions included a partial load of 50 N·m and a high load of 70 N·m. Data was recorded as the exhaust valve timing was controlled, and this was used to calculate the efficiency of combustion using a heat release, the fuel conversion efficiency, and the pumping loss. Results and the hydrocarbon concentrations in the exhaust gas were compared for each condition. Experiment results confirmed that additional fuel efficiency improvements are possible through exhaust valve timing control at 1,500 rpm and 50 N·m. However, in other operating conditions, fuel efficiency improvements could not be obtained through exhaust valve timing control because cases where the pumping loss and fuel/air mixture slip increased when the exhaust valve timing changed and the fuel efficiency declined.

소화기 종양에 대한 내시경적 완화치료 (The Role of Endoscopic Interventions in Palliative Care for the Gastrointestinal Tumors)

  • 김혜강;정대영
    • Journal of Digestive Cancer Research
    • /
    • 제2권1호
    • /
    • pp.1-4
    • /
    • 2014
  • Palliative care for cancer aims to relieve the discomfort and pain from the cancer itself and associated conditions. Gastrointestinal cancers originate from the tube like structure of gastrointestinal tract and cause complications such as obstruction, bleeding, adhesion, invasion, and perforation to adjacent organ. Recent advances in interventional endoscopy enables endoscopy physicians to do safe and effective care for gastrointestinal cancer patients. Endoscopic palliation includes stent, hemostasis, nutritional support and targeted drug delivery. Self expandable metallic stent is one of the most important modalities in gastrointestinal palliation. Through the endoscopy or over the wire pre-placed by endoscopy, stents restore the gastrointestinal luminal patency and relieve the obstructive condition. Endoscopic hemostasis is another important palliation in gastrointestinal cancer patients. Epinephrine injection, argon plasma coagulation and thermal cauterization are usual modalities for hemostasis. Histoacryl glue and fibrin glue are also available. Hemostatic nanopowder spray is newly reported effective in benign disease and is supposed to be effective also in cancer bleeding. Enteral feeding tubes including gastro- or jejunostomy and nosoduodenal tubes are placed by using endoscopic guidance. Enteral feeding tubes role as the route of easily absorbable or semi-digested nutrients and effectively maintain both patients calorie requirements and gut microenvironment. Photodynamic therapy is the one of the outstanding medical employments of photo-physics. Especially for superficial cancers in esophagus, photodynamic therapy is very useful in cancer removal and maintaining organ structure. In biliary neoplasm, photodynamic therapy is well known to be effective in cancer ablation and biliary ductal patency restoration. Targeted drug delivery is the lastest issue in palliative endoscopy. Debates and questions are still on the table. In this article, the role of endoscopic interventions in palliative care for the gastrointestinal tumors will be thoroughly reviewed.

  • PDF

백강균(Beauveria bassiana)에 감염된 잣나무넓적잎벌(Acantholyda posticalis posticalis Matsumura) 토중 유충의 병징 (Effects of the Entomopathogenic Fungus Beauveria bassiana on the Larva of the Black Tipped Sawfly, Acantholyda posticalis posticalis Matsumura)

  • 김형준;홍옥기;이창근;신상철;박용철
    • 한국응용곤충학회지
    • /
    • 제35권3호
    • /
    • pp.221-227
    • /
    • 1996
  • 산림청으로부터 분양받은 백강균의 균주 F101, F587, FJ8의 포자형성력과 균사와 포자의 esterase 활성도를 비교한 결과 F101이 가장 우수한 것으로 나타났다. 균의 포자를 도말한 후 $25^{\circ}C$ 조건에서 보관하면 5~7일부터 충이 치사하여 24~28일 후에는 충의 표면에 균사와 포자가 분출한다. 그러나 $4^{\circ}C$ 보관조건에서는 뚜렷한 병적 증상이 나타나지 않았고 50일 이상이 경과하여도 충밖으로 균사나 포자가 분출되는 것을 관찰할 수 없다. 백강균의 포자를 충체에 주입하였을 경우에는 충의 치사시기가 빨라지며 4$^{\circ}C$보다 $25^{\circ}C$에 보관하면서 지방체, 표피, 혈림프로 구분하여 전기영동법으로 조사한 결과 각 조직의 일반단백질과 esterase는 충 치사시기인 3일(60시간)을 기점으로 상당수가 사라지는 현상을 보인다. 백강균은 기주에 재차감염을 일으킬 수 있는 확율을 최대한으로 하기 위하여 공기중에 있을 때는 포자를, 토중에서는 길고 가는 균사를 형성하는 생리적인 적응을 한다.

  • PDF

뉴캣슬병 면역에 대한 검토 III. 예방접종 프로그램과 접종경노를 중심으로 한 뉴캣슬병 면역능 검토 (Studies on the Immunization Against Newcastle Disease III. Investions on the Immunity of Newcatle Disease with Special Reference to Vaccination Program and Route)

  • 이학철;정유열
    • 한국가금학회지
    • /
    • 제8권2호
    • /
    • pp.77-89
    • /
    • 1981
  • The experimental study was undertaken to confirm the effect of vaccination of birds with Newcastle disease (ND) vaccines on the Market by use of th. various vaccination programs. Sixteen groups of birds varying from 2 to f days of age, which were originated from hyper-immunised hens against ND were immunised by three different ways, a live vaccine only, a killed vaccine only, and the combination of a live and killed vaccine according to the each schedule of employed programs. In the administration of a live vaccine only, birds were immunized by one of following methods, the combination of intranasal and intraocular inoculation, intramuscular inoculation, via drinking water and the double inoculation by spray and drinking water application. Except for the double application, all the birds were vaccinated 2,3 or 4 times with two volumes of the virus dose (drinking water application) instructed by the commercial vaccine laboratory, until 21, 28 or 30 days of age, and all the immunized birds 19, 21 or 28 days postvaccination were challenged intramuscularly with 1.0$m\ell$ of 10,000 MLD per $m\ell$ of a virulent ND virus. In the administration of the combination of a live and killed vaccine, birds were immunized 2 or 3 times intranasally at first until 14 or 28 days of age with the same dose of the above experiment of a live vaccine, and then inoculated intramuscularly 1 or 2 times until 60 days of age with 1.0 $m\ell$ of a killed vaccine. And all immunized birds 11 days postvaccination were challenged with the same procedure of the above experiment. In the administration of a killed vaccine only, birds were immunized 3 times intramuscularly until 28 days of age with varied dose (0.2-0.5 $m\ell$) of a killed vaccine and all immunized birds 33 days postvaccination were challenged with the same procedure of the above experiment. The results obtained are summerised as follows: All birds vaccinated by using the combination of a live and killed vaccine program or a killed vaccin only appeared to be refractory. without any sign of illness, to the challenge exposure with 1.0$m\ell$ of 10,000 MLD per $m\ell$ of a virulent ND virus. On the other hand, the survival rates of birds of live vaccine groups immunized by a number of vaccine program such as Salsbury's day old program, 3-3-3 program, the Institute of Veterinary Reserch program and Multiple inoculation program, were 39.58%, 43.7%, 43.75% and 47.80%, respectively. And the survival rates of birds vaccinated with a live vaccine by 4 different ways of administration, i.e., double inoculation by water and aerosol application, intramuscular injection, intranasal instillation and via 4.inking water were 87.50%, 64.06%, 42.18% and 25.00%, respectively.

  • PDF

도로 터널 내 수소 제트 화염에 대한 CFD 해석 연구 (CFD analysis of the effect of hydrogen jet flame in road tunnel)

  • 박진욱;유용호;김휘성
    • 한국터널지하공간학회 논문집
    • /
    • 제24권6호
    • /
    • pp.629-636
    • /
    • 2022
  • 국내의 친환경차는 현재 국내 총 등록차량 중 5.8% 비중을 차지하고 있으며, 대표적 친환경 차량 중 하나인 수소차는 정부의 수소 산업 부양 정책을 근간으로 시장에 보급 확대되어 현재 26,719대의 보급량을 기록하며 초년 대비 300배로 성장했다. 따라서, 보급 증가에 따른 수소차에 대한 안전성 검토 및 확보가 다방면에서 확대되어야 하는 시점이다. 본 연구에서는 수소차가 통행하는 반밀폐 공간 중 하나인 도로터널에서 수소차에 의한 제트화염 발생시 내부의 열 피해 영향에 대해 분석하였다. 상용코드인 Fluent를 사용하여 시뮬레이션하였으며, 마제형 터널을 대상으로 상용 수소차의 수소탱크 용량을 고려하여 제트 화염 분사량을 선정하였다. 또한, 제트화염의 방향 및 터널 벽면과의 거리 등을 변수로 하여 연구를 수행하였다. 그 결과로부터 도로 터널 내 제트화염 분출시 방향에 따라 일부 차이가 있으나 차량(분사 노즐) 기준 종방향으로 ±5 m, 인접한 터널 벽면 기준 횡방향 5~7 m 이내에서는 대부분의 구역에서 20 kW/m2 이상의 높은 복사열 방사가 발생되었다.

임지의 축산적 이용에 관한 연구 제2보. 강원도의 새마을 "소" 임간공동방목사업의 문제점과 개선책 (Studies on the Utilization of Woodland for Livestock Farming II. Problem and Its Improvement Followed by the Join Cattle Grazing in king Won Do)

  • 맹원재;윤익석;유제창;정승헌
    • 한국초지조사료학회지
    • /
    • 제3권2호
    • /
    • pp.100-111
    • /
    • 1983
  • 본(本) 연구(硏究)는 강원도(江原道) 새마을 '소' 임간공동방목사업(林間共同放牧事業)의 일환(一環)으로 81년도(年度)에 개설(開設)된 105개(個)의 공동방목장(共同放牧場)과 '82년도(年度)에 개설(開設)된 103개(個)의 공동방목장(共同放牧場)의 경영실태와 분석(分析)된 문제점(問題點) 그리고 개선방안(改善方案)에 관한 연구결과(硏究結果)를 요약(要約)하면 다음과 같다. 1. 공동방목(共同放牧) 사업(事業)의 효과 1) 방목기간중(放牧期間中) 1 일(日) 평균(平均) 증체량은 0.46kg으로서 농가(農家) 관행사육(慣行飼育)의 0.33kg보다 높았다. 2) '82년도(年度) 208개(個) 공동방목장(共同放牧場)의 방목기간(放牧期間)(5-10 월(月))중(中) 임간공동방목(林間共同放牧) 사업(事業)의 효과를 경제분석하면, 관행사육(慣行飼育)보다 293,075.,300원의 증체효과, 543,838,750원의 인건비(人件費) 절감효과 및 194,443,270원의 사료비(飼料費) 절감효과를 얻어 약(約) 1,031,357,320원의 소득효과를 가져왔다. 3) 208개(個) 공동방목장(共同放牧場)의 설문(設問) 조사(調査) 결과(結果), 농가(農家) 관행(慣行) 사육(飼育)보다 공동방목장(共同放牧場) 순위별(順位別) 효과에 대해서 농민들은 첫째 노동력(勞動力) 절감(節減). 둘째 사료비(飼料費) 절감(節減), 셋째 질병(疾病) 넷째 다두사육(多頭飼育) 가능(可能), 다섯째 협동심고취(協同心鼓吹), 여섯째 증체 효과, 일곱째 사양관리(飼養管理) 용역(容易), 여덟째 시설비(施設費) 절감(節減)을 들고 있다. 2. 공동방목(共同放牧) 사업(事業)의 문제점(問題點) 1) 임간공동방목(林間共同放牧) 2년차(年次)부터는 야생초(野生草)의 재생력(再生力)이 현저하게 저하(低下)되어 풀의 부족 현상이 일어난다. 2) 임간공동방목장(林間共同放牧場) 적지(適地)가 국유지(國有地)에 많으나 산림청(山林廳)의 이용(利用) 허가(許可)가 나지 않아 이용이 불가능하다. 3) 방목(放牧)으로 인(因)하여 발정(發精)한 암소를 발견하기 어려워서 수정시기(授精時期)를 놓치는 경우가 많다. 4) 각(各) 방목우(放牧牛)에 대한 방역(防疫) 및 진료(診療)의문제점이 많다. 3. 임간공동방목(林間共同放牧) 사업(事業)의 개선책(改善策) 1) 공동방목장(共同放牧場) 2년차(年次)부터는 겉뿌림초지(草地)나 제경초지(蹄耕草地)를 조성(造成)하여 충분한 조사료(粗飼料)를 확보(確保)시킬 것. 2) 정부(政府)는 강원도(江原道) 내(內) 모든 국유지(國有地)의 방목(放牧) 적지(適地)는 임간공동방목장(林間共同放牧場)으로 이용하여 우육(牛肉) 증산(增産), 독우(犢牛) 생산(生産) 지대(地帶)로 활용(活用)되도록 조치(措置)할 것. 3) 여지(與地)의 방목장(放牧場)에는 우수(優秀) 종빈우(種牝牛)를 혼목(混牧)시켜 번식성적(繁殖成績)을 올리도록 한 것. 그리고 발정(發情) 촉진(促進) 홀몬 주사(注射)로 동시(同時) 발정(發情)을 유도(誘導)해서 일괄 수정(授精)시킬 것. 4) 방목장(放牧場)에 토양병(土壤病)인 기종저의 예방(豫防) 주사(注射), 간질충에 대한 구충제의 년간(年間) 2회(回) 투여, 진드기 방제(防除)를 위하여 약욕(藥浴)을 시킬 것. 4. 임간공동방목장(林間共同放牧場) 육성(育成)을 위한 정책방향(政策方向) 1) 정부(政府)는 전국(全國)의 임야(林野)를 대상(對象)으로 임간공동방목장(林間共同放牧場) 적지(適地)를 조사(調査)할 것. 2) 정부(政府)는 임간공동방목장(林間共同放牧場) 적지(適地)로 판단되는 지역은 국공유림(國公有林)이나 법적(法的) 제한(制限) 지역(地域)도 목장(牧場) 개설(開設)이 가능하도록 조치할 것. 3) 정부(政府)는 여지(餘地)에 있는 공동방목장(共同放牧場) 적지(適地)에는 도로(道路) 개설(開設)과 전기목붕(電氣牧棚) 시설(施設)을 정부(政府) 자금(資金)으로 지원할 것. 4) 새마을 운동(運動)의 방향(方向)을 축산소득증대(畜産所得增大)에 두고 강원도(江原道)의 특성(特性)에 맞게 계속 임간공동방목(林間共同放牧) 사업(事業)이 추진(推進)될 수 있도록 정책적(政策的)인 배려가 필요하다. 5) 정부(政府)는 공동방목장(共同放牧場) 경영에 있어서 번식(繁殖) 성적(成績) 향상(向上)을 위한 인공수정상말비점(人工受精上末備点)을 보완(補完)해 줄 것. 6) 정부(政府)는 소 값의 적정(適定) 가격(價格) 수준(水準)을 유지(維持)하기 위한 가격(價格) 정책(政策)을 실시(實施)할 것. 7) 정부(政府)는 임간공동방목장(林間共同放牧場)에서 초지조성(草地造成)의 신청(申請)이 있을 때는 우선적으로 허가(許可)해 줄 것.

  • PDF