• Applied Chemistry for Engineering
• /
• v.33 no.6
• /
• pp.581-587
• /
• 2022

The leather industry generates a large amount of hazardous leather waste of various types every year. Among them, shaving scrap is difficult to recycle because it contains chromium ions. Many studies in recent years have shown that shaving scraps can be processed into various types of valuable products, such as adsorbent, filler, and poultry feed. In this study, collagen peptides were extracted from shaving scraps and structurally modified to be developed as new materials with improved physicochemical properties. First, the chromium ions contained in the shaving scraps were removed using a sodium hydroxide solution, and purified through concentration and low-temperature crystallization. The purified collagen peptide was used to prepare the powder using a spray dryer. The extracted collagen peptides were structurally modified by introducing double bonds by reacting with methacrylic anhydride (MAA), and the product was confirmed by ¹H NMR spectroscopy. Next, a copolymer was prepared by redox polymerization of the modified collagen peptide (MCP) and 2-ethylhexyl acrylate (2-EHA). The structure of the copolymer was qualitatively confirmed by FT-IR. In conclusion, this study confirmed that collagen peptides can be extracted from shaving scrap and converted into new eco-friendly materials through certain treatments.

• Journal of Bio-Environment Control
• /
• v.31 no.1
• /
• pp.52-59
• /
• 2022

Pest control treatment was carried out using an unmanned automatic pesticide spraying system that can spray pesticides on crops while moving autonomously to control pests in vegetable greenhouse. As a result of examining the control effect on tomato and strawberry on thrips (Frankliniella occidentalis) and greenhouse whitefly (Trialeurodes vaporariorum) pests, 85.6% of yellow flower thrips were found in tomatoes and 87.5% in strawberries, and 81.7% (tomato) and 80.6% (strawberry) of greenhouse whitefly. In addition, the control effect according to the pesticide treatment method showed a control effect of 81.7% of the chemical spraying treatment by manpower and 83.9% of the automatic moving pesticide spraying treatment (F=22.1, p < 0.001). When comparing the control effect between the two treatment sections, there was no significance, but the automatic transfer spraying treatment showed a 2.2% higher effect. On the other hand, as a result of comparing the spraying time of the drug, the automatic unmanned control sprayer had a spraying time of 5 min/10a, which took about 25 min less than the conventional manpower spraying time of 25-30 min/10a. Based on these results, it was judged that the automatic transfer spraying method could be usefully used for efficient pest control in the facility greenhouse during the peak period of development.

• Tunnel and Underground Space
• /
• v.32 no.6
• /
• pp.353-362
• /
• 2022

The wet shotcrete refers to a method in which all materials are mixed and then supplied to the spraying device, compressed air is added to the nozzle, and the spraying speed is improved to spray on the target surface. In order to reproduce the amount of shotcrete used in the wet method in the field and the situation at the laboratory scale, it is essential to control the discharge amount of the equipment. In this study, in order to increase the reproducibility of field conditions at the laboratory scale, a flow control system for shotcrete mortar spraying equipment was developed and applied to the equipment. To verify the developed equipment, a discharge control test using water and mortar was performed. In the developed control system, the discharge was smoothly controlled according to the user input value for the mono pump, but the discharge was not properly controlled according to the input value for the screw pump because of a reducer. When a speed reducer is attached, it is necessary to adjust the operation rate of the screw pump close to the target flow rate by increasing the operation rate of the screw pump while lowering the operation rate of the mono pump.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.2A
• /
• pp.169-176
• /
• 2010

Generally, poly-urea is widely used as waterproof coating material due to its superior adhesiveness, elongation capacity, and permeability resistance. In addition, it can be quickly and easily applied on structure surfaces using spray application. Since it hardens in about 30 seconds after application, its construction efficiency is very high and its usage as a special functional material is also excellent. However, currently, poly-urea is mostly used as waterproof coating material and the researches on its usage as a retrofitting material is lacking at best. Therefore, basic studies on the use of poly-urea as a general structural retrofitting material are needed urgently. The objective of this study is to develop most optimum poly-urea composition for structure retrofitting purpose. Moreover, the structural strengthening capacity of the developed poly-urea is evaluated through flexural capacity experiments on RC beams and RC slabs. From the results of the flexural test of poly-urea strengthened RC beam and slab specimens, the poly-urea and concrete specimen showed monolithic behavior where ductility and ultimate strength of the poly-urea strengthened specimen showed slight increase. However, the doubly reinforced specimens with FRP sheet and poly-urea showed lower capacity than that of the specimen reinforced only with FRP sheet.

• Korean Journal of Hazardous Materials
• /
• v.2 no.1
• /
• pp.18-26
• /
• 2014

We analyzed the demand of competent authorities requiring adequate technical information for initial investigation of chemical accidents. Reflecting technical reports on chemical accident response by environmental agencies in the U.S. and Canada, we presented information on environmental diffusion and toxic effects available for the first chemical accident response. Hydrogen fluoride may have the risk potential to corrode metals and cause serious burns and eye damages. In case of inhalation or intake, it could have severe health effects. The substance itself is inflammable, but once heated, it decomposes producing corrosive and toxic fume. In case of contact with water, it can produce toxic, corrosive, flammable or explosive gases and its solution, a strong acid, may react fiercely with a base. In case of hydrogen fluoride leak, the preventive measures are to decrease steam generation in exposed sites, prevent the transfer of vapor cloud and promptly respond using inflammable substances including calcium carbonate, sodium bicarbonate, ground limestone, dried soil, dry sand, vermiculite, fly ash and powder cement. The method for fire fighting is to suppress fire with manless hose stanchions or monitor nozzles by wearing the whole body protective clothing equipped with over-pressure self-contained breathing apparatus from distance. In case of transport accident accompanied with fire, evacuation distance is 1,600m radius. In cae of fire, fire suppression needs to be performed using dry chemicals, CO₂, water spray, water fog, and alcohol-resistance foam, etc. The major symptoms by exposure route are dyspnoea, bronchitis, chemical pneumonia and pulmonary edema for respiration, skin laceration, dermatitis, burn, frostbite and erythema for eyes, and nausea, diarrhea, stomachache, and tissue destruction for digestive organs. In atmosphere, its persistency is low, and its bioaccumulation in aquatic organism is also low.

• The Korean Journal of Pesticide Science
• /
• v.17 no.4
• /
• pp.244-248
• /
• 2013

This study was carried out to investigate the residual characteristics and calculate processing factor of the environment friendly material matrine in fresh chilli pepper by drying. Spray solution of matrine was prepared by dilution of the commercial product (2% active ingredient) with water at 1 : 1000 (v/v) ratio and sprayed onto chilli pepper plants at seven day intervals. Samples were collected at 0, 1, 3, 5 and 7 days after last application and then dried using a hot air dry oven at $60^{\circ}C$ for 36 hours until the water content was reduced to 14%. Recoveries and storage period stabilities of matrine in the samples ranged from 106.6 to 119.1% and 106.6 to 113.1%, respectively. The residual concentrations of matrine in fresh chilli pepper and dried chilli peppers treated only once were found to be from less than 0.01 to 0.11 and from 0.03 to 0.25 mg/kg, respectively. In case of plants sprayed twice with matrine, the residual concentrations ranged from 0.02 to 0.12 and from 0.04 to 0.4 mg/kg, respectively. Processing factor of matrine in the fresh chilli pepper by drying was found to be from 1.5 to 3.3, indicating that the residual concentration of matrine in dried chilli pepper increased about two or three times by drying.

• Horticultural Science & Technology
• /
• v.29 no.6
• /
• pp.555-560
• /
• 2011

The objective of this study was carried out to investigate the proper plant growth regulator for increasing the number of flower, fruit set, and to enlarge the size of the berries in Ardisia pusilla. Flower bud formation was used rooted cutting, and fruit set, enlargement, and coloration of fruit were used with two years-old. $GA_3$ concentrations were treated with 0, 100, 200, or $400mg{\cdot}L^{-1}$. Flower bud formation was effective in $400mg{\cdot}L^{-1}$ $GA_3$ and it was 1.8 times greater than control. Plant growth regulators were applied by foliar spray at full bloom stage to increase the fruit set. As a result, $GA_3$ was the most effective for increasing fruit set. Also, auxins of 4-CPA (Tomatotone, Donbu hitech Co., Korea) and dichloprop triethanol amine (Antifall, Bayer Crop Science Co., Ltd., Korea) were effective. When $GA_3$ concentrations of 0.5 and $1.0mg{\cdot}L^{-1}$ were used, fruit set (%) reached to 70% and 77%, respectively. Effectiveness of $GA_3$ was 1.8 times greater than control. Also, auxins, dichloprop triethanol amine increased to about 7-12% during fruit setting, but cytokinin and anti-gibberellin were ineffective. To investigate the fruit enlargement and coloration, $GA_3$ was treated with 0.3, 0.6, and $1.2mg{\cdot}L^{-1}$. Fruit enlargement was achieved to about 15% by $GA_3$ $0.6mg{\cdot}L^{-1}$ when $GA_3$ was treated 3 times at the interval of 1 month per treatment when fruit size was about 2-3mm (after full-blooming two months). But anthocyanin contents for coloration of fruit skin were not significant according to $GA_3$ concentration. The results showed that $GA_3$ enhanced bud formation, fruit set and enlargement of fruit size in Ardisia pusilla.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.11
• /
• pp.1615-1634
• /
• 2004

A review was undertaken to obtain information on the sustainability of pig free-range production systems including the management, performance and health of pigs in the system. Modern outdoor rearing systems requires simple portable and flexible housing with low cost fencing. Local pig breeds and outdoor-adapted breeds for certain environment are generally more suitable for free-range systems. Free-range farms should be located in a low rainfall area and paddocks should be relatively flat, with light topsoil overlying free-draining subsoil with the absence of sharp stones that can cause foot damage. Huts or shelters are crucial for protecting pigs from direct sun burn and heat stress, especially when shade from trees and other facilities is not available. Pigs commonly graze on strip pastures and are rotated between paddocks. The zones of thermal comfort for the sow and piglet differ markedly; between 12-22$^{\circ}C$ for the sow and 30-37$^{\circ}C$ for piglets. Offering wallows for free-range pigs meets their behavioural requirements, and also overcomes the effects of high ambient temperatures on feed intake. Pigs can increase their evaporative heat loss via an increase in the proportion of wet skin by using a wallow, or through water drips and spray. Mud from wallows can also coat the skin of pigs, preventing sunburn. Under grazing conditions, it is difficult to control the fibre intake of pigs although a high energy, low fibre diet can be used. In some countries outdoor sows are fitted with nose rings to prevent them from uprooting the grass. This reduces nutrient leaching of the land due to less rooting. In general, free-range pigs have a higher mortality compared to intensively housed pigs. Many factors can contribute to the death of the piglet including crushing, disease, heat stress and poor nutrition. With successful management, free-range pigs can have similar production to door pigs, although the growth rate of the litters is affected by season. Piglets grow quicker indoors during the cold season compared to outdoor systems. Pigs reared outdoors show calmer behaviour. Aggressive interactions during feeding are lower compared to indoor pigs while outdoor sows are more active than indoor sows. Outdoor pigs have a higher parasite burden, which increases the nutrient requirement for maintenance and reduces their feed utilization efficiency. Parasite infections in free-range pigs also risks the image of free-range pork as a clean and safe product. Diseases can be controlled to a certain degree by grazing management. Frequent rotation is required although most farmers are keeping their pigs for a longer period before rotating. The concept of using pasture species to minimise nematode infections in grazing pigs looks promising. Plants that can be grown locally and used as part of the normal feeding regime are most likely to be acceptable to farmers, particularly organic farmers. However, one of the key concerns from the public for free-range pig production system is the impact on the environment. In the past, the pigs were held in the same paddock at a high stocking rate, which resulted in damage to the vegetation, nutrient loading in the soil, nitrate leaching and gas emission. To avoid this, outdoor pigs should be integrated in the cropping pasture system, the stock should be mobile and stocking rate related to the amount of feed given to the animals.

• Research in Plant Disease
• /
• v.8 no.2
• /
• pp.84-91
• /
• 2002

Disease forecasting in Korea was first studied in the Department of Fundamental Research, in the Central Agricultural Technology Institute in Suwon in 1947, where the dispersal of air-borne conidia of blast and brown spot pathogens in rice was examined. Disease forecasting system in Korea is operated based on information obtained from 200 main forecasting plots scattered around country (rice 150, economic crops 50) and 1,403 supplementary observational plots (rice 1,050, others 353) maintained by Korean government. Total number of target crops and diseases in both forecasting plots amount to 30 crops and 104 diseases. Disease development in the forecasting plots is examined by two extension agents specialized in disease forecasting, working in the national Agricul-tural Technology Service Center(ATSC) founded in each city and prefecture. The data obtained by the extension agents are transferred to a central organization, Rural Development Administration (RDA) through an internet-web system for analysis in a nation-wide forecasting program, and forwarded far the Central Forecasting Council consisted of 12 members from administration, university, research institution, meteorology station, and mass media to discuss present situation of disease development and subsequent progress. The council issues a forecasting information message, as a result of analysis, that is announced in public via mass media to 245 agencies including ATSC, who informs to local administration, the related agencies and farmers for implementation of disease control activity. However, in future successful performance of plant disease forecasting system is thought to be securing of excellent extension agents specialized in disease forecasting, elevation of their forecasting ability through continuous trainings, and furnishing of prominent forecasting equipments. Researches in plant disease forecasting in Korea have been concentrated on rice blast, where much information is available, but are substan-tially limited in other diseases. Most of the forecasting researches failed to achieve the continuity of researches on specialized topic, ignoring steady improvement towards practical use. Since disease forecasting loses its value without practicality, more efforts are needed to improve the practicality of the forecasting method in both spatial and temporal aspects. Since significance of disease forecasting is directly related to economic profit, further fore-casting researches should be planned and propelled in relation to fungicide spray scheduling or decision-making of control activities.

• The Korean Journal of Pesticide Science
• /
• v.19 no.3
• /
• pp.255-263
• /
• 2015

Promoting the organic farming, much of the plant extracts used for controlling pests and fungi have been imported from China, India and Myanmar. But, it is so worrisome that aquatic animals such as muddy loach inhabiting in paddy field and common carps in river exposed to the pests and fungi likely be harmed. This study was conducted in order to evaluate the risks of aquatic animals influenced by the three plant extracts, i.e. Sophora flavescens, Azadirachta indica and Derris elliptica. The toxicities of common carp (Cyprinus Carpio), muddy loach (Misgurnus anguillicaudatus) and PEC (Predicted environmental concentration) exposed to the three plant extracts were estimated by the typical spray volume method. Risks were determined by the toxicity value as 48-hr $LC_{50}$ (Lethal concentration, median) or NOEC (No observed effect concentration) into PEC. 48-hr $LC_{50}$ of Common carp and NOEC by Sophora flavescens extracts was 7.9 and 6.2 mg/L, 26.8 and 21.8 mg/L by Azadirachta indica extracts and 47.0 and < 24.0 mg/L by Derris elliptica extracts, respectively. 48-hr $LC_{50}$ of Muddy loach and NOEC by Sophora flavescens extracts was 16.9 and 10.0 mg/L, 35.6 and 30.0 mg/L by Azadirachta indica extracts, and 73.9 and < 40 mg/L by Derris elliptica extracts, respectively. Therefore, acute toxicities of the three plant extracts for aquatic animals were proved to be very low level. PEC of Sophora flavescens extracts in paddy, drainage and river water was 68.0~3.0, 11.33~0.50 and 3.0~0.0018 mg/L, respectively. TER of Sophora flavescens extracts in the three water was 0.2~5.6, 1.5~33.8 and 2.6~4388.9, respectively. PEC of Azadirachta indica extracts in paddy, drainage and river water was 90.9~1.2, 15.2~0.2 and 4.8~0.00075 mg/L, respectively. TER of Azadirachta indica extracts in the three water was 0.4~29.7, 2.3~178.0 and 4.5~35733.3, respectively. PEC of Derris elliptica extracts in river water was 0.0063 mg/L. TER of Derris elliptica extracts in river water was 5222~15667.