• Prospectives of Industrial Chemistry
• /
• v.24 no.1
• /
• pp.3-13
• /
• 2021

강유전체는 특유의 높은 유전상수와 자발분극으로 인해 반도체 소자 및 센서 등에서 널리 활용되어 왔다. 강유전체의 특성을 활용하여 광전소자에서 형성된 전하를 원하는 방향으로 쉽게 이동시킬 수 있는 특성을 가지고 있어 광전소재와 결합 시 특성 향상이 가능한 것으로 알려져 있다. 그러나 강유전체와 기존 태양전지와의 융합 연구들은 기초적인 단계의 연구가 산발적으로 진행되고 있으나, 아직 실용화 단계에는 이르지 못하고 있다. 본 서지에서는 최근에 활발히 연구되기 시작한 강유전 기반 광소자와 그 관련 연구를 소개하고자 한다. 특히 강유전체 자체를 활용한 태양전지와 유기태양전지, 실리콘 태양전지, 페로브스카이트 태양전지 등 최근 가장 활발히 연구되고 있는 태양전지 소재와 강유전체를 결합한 새로운 태양전지의 연구동향을 다룰 고자 한다. 이와 같은 자발분극에 의한 캐리어 이동의 변화는 에너지 소자 전반에 기여할 수 있을 것이다.

• Journal of the Korean Magnetics Society
• /
• v.17 no.1
• /
• pp.10-13
• /
• 2007

Single crystalline, $LuFe_2O_4$, was grown by the floating zone method. The crystal structure was a two-dimensional layered-type rhombohedral($R\={3}mh$) structure, with an $a_0=3.440(2)\;{\AA}\;and\;a\;c_0=25.263(2)\;{\AA}$. The magnetic $N\'{e}el$ temperature($T_N$) was determined to be 250 K. The $M\"{o}ssbauer$ spectrum at 12 K was fitted with four sextet sets which was resulted from the crystal structure. The spectrm at room temperature consisted of three singlets and a doublet with the electric quadrupole splitting. The isomer shift($\delta$) value of the singlet was $0.20{\pm}0.01mm/s$ relative to the Fe metal indicating the $Fe^{3+}$ valence state, and the value of the doublet was $0.70{\pm}0.01mm/s$ indicating $Fe^{2+}$. The $M\"{o}ssbauer$ absorption area ratio between $Fe^{3+}$ and $Fe^{2+}$ at room temperature was 1:1. The doublet phase of spectra gradually disappears by up to 360 K. At 360 K, the spectrum shows the singlet phase. We suggested that the spontaneous polarization effect of $LuFe_2O_4$ was caused by the change of iron behavior.

• Journal of the Korean Ceramic Society
• /
• v.42 no.11 s.282
• /
• pp.749-752
• /
• 2005

When an electric field higher than a characteristic coercive field is applied to a ferroelectric such as $LiNbO_3$, the orientation of the spontaneous polarization is reversed, which causes the reversal of the sign of odd-rank tensor properties such as electro-optic and nonlinear optic coefficients. A fabrication process of insulator and periodic external field assisted poling of a z-cut $LiNbO_3$ have been optimized for a periodic $180^{\circ}$ phase inversion along z-axis. The poling jig and the poling control system, fully controlled by a computer, for high quality and reproducible PPLN fabrication have been devised. Periodically polarization reversed PPLN was adjusted based on the fabricated thickness of insulator. The poling structure of PPLN was observed under a microscope after etching PPLN samples by an etching solution ($HF:HNO_3$ = 1 : 2) for about 15 min.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.4
• /
• pp.300-305
• /
• 2000

We have investigated the dielectric and electrical characteristics of palmitic acid(PA) stearic acid(SA) and arachidic acid(AA) Langmuir-Blodgett(LB) films because these fatty acid systems have a same hydrophilic group and a different hydrophobic one(methylene group or alkyl chain length). The fatty acid systems were used as LB films and the status of the deposited films was confirmed by evaluating the transfer ratio the UV absorption and the capacitance. The dielectric characteristics such as the frequency-capacitance characteristics and the dielectric dispersion and absorption characteristics of PA SA and AA through-plane were measured. The relative dielectric constants of PA, SA and AA LB films were about 3.0~4.6, 2.7~3.0 and 2.4~3.0 respectively. That is the relative dielectric constants were decreased in proportion to the chain length of methylene group. Also the dielectric dispersion and absorption of each fatty acid LB films have arisen from spontaneous polarization of dipole polarization in the range of 10$^4$~10$^{5}$ ［Hz］. The conductivity of PA, SA and AA LB films obtained from I-V characteristics were about 9$\times$10$^{-14}$ , 3$\times$10$^{-14}$ and 5$\times$10$^{-15}$ ［S/cm］. respectively. These results have shown the insulating materials and could control the conductivity y changing the length of methylene group. Also we have confirmed that the barrier height of fatty acid systems were almost the same ones obtained from dielectric characteristics.

• Journal of the Korean Chemical Society
• /
• v.53 no.5
• /
• pp.485-490
• /
• 2009

The inhibitive action of the aqueous extract of lawsonia, licorice root and carob toward the corrosion of tin electrode in 0.1 M $NaHCO_3$ solutions was investigated using galvanostatic polarization measurements. It was found that the corrosion rate decreases in the presence of these extracts indicating the inhibiting of these compounds. The inhibition efficiency increases with increasing extract concentration. The inhibition action of these extracts was explained in view of adsorption of its compounds onto the tin surface, making a barrier to mass and charge transfer. The adsorption of these extracts on the tin surface was found to be a spontaneous process and follow Freundlich adsorption isotherm. It is also found that these extracts provide a good protection to tin against pitting corrosion in chloride containing solution using potentiodynamic anodic polarization technique.

• Applied Science and Convergence Technology
• /
• v.25 no.5
• /
• pp.88-91
• /
• 2016

The $Pb[(Mg_{1/3}Ta_{2/3})_{0.7}Ti_{0.3}]O_3$+xwt%PbO systems at temperature of $1250^{\circ}C$ for 4 hours was successful synthesized. In this study, PbO-doped $Pb[(Mg_{1/3}Ta_{2/3})_{0.7}Ti_{0.3}]O_3$ systems with non-linear behaviors showed ordering-degree dependence at the low temperature range were prepared using the columbite precursor method. And the characteristic of remnant polarization vs. electric field were analyzed. The pyroelectric, dielectric and piezoelectric properties of partially disordered $Pb[(Mg_{1/3}Ta_{2/3})_{0.7}Ti_{0.3}]O_3$+xwt%PbO solid solutions were studied as a function of temperature, frequency, and electric field. It showed distinct features of temperature dependent of pyroelectric coefficient, spontaneous polarization and dielectric constant at about $50^{\circ}C$. The figure of merit was calculated as pyroelectric coefficient, dielectric constant and dissipation factor. It was found that the high voltage responsivity FV, high detectivity FD were $0.0373m^2/C$ and $0.6735{\times}10^{-4}Pa{-1/2}$, respectively, in the $Pb[(Mg_{1/3}Ta_{2/3})_{0.7}Ti_{0.3}]O_3$+3.0 wt%PbO system.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2006.10a
• /
• pp.110-114
• /
• 2006

Dielectric properties of glass-ceramics with fresnoite(Ba2TiSi208) crystals have been investigated in xK20-(33.3-x)BaO-16.7TiO2-50SiO2 ($0{\leq}x{\leq}20mol%$) glasses. The glassy nature was analyzed by differential thermal analyses and glass-ceramics was variable and control table by the processing parameters like time and temperature. Dielectric constant was measured over a temperature from 125K to 425k at frequencies form 100Hz to 1MHz, and laid in the range 16-10. Piezoelectric constant d33 was measured using a YE2703A d33meter and changed from 5.9 to 4.8pCN-1 with x contents. The spontaneous polarization Ps estimated from the hysteresis at ${\pm}1.2kV$ was ${\sim}0.3\;{\mu}C/cm2$ at room temperature.

• Corrosion Science and Technology
• /
• v.10 no.1
• /
• pp.13-23
• /
• 2011

The inhibitive action of thiadiazolopyrimidines on mild steel in 1 M $H_{2}SO_{4}$ has been studied using weight loss, gasometric studies and electrochemical polarization and AC impedance measurements. The effect of temperature on the corrosion behaviour of mild steel in 1 M $H_{2}SO_{4}$ with optimum concentration of inhibitors was studied in the temperature ranging from 313-333K The adsorption of the inhibitor on the surface of mild steel was found to be exothermic, spontaneous and followed the mechanism of physisorption. The adsorption of these compounds on mild steel surface was found to obey Langmuir adsorption isotherm. The protective film formed on the surface of mild steel by the adsorption of inhibitor in 1 M $H_{2}SO_{4}$ solution was confirmed by optical microscopic technique. Synergistic effect of halide ions on mild steel in 1 M $H_{2}SO_{4}$ was studied by weight loss technique.

• Journal of the Korean Ceramic Society
• /
• v.32 no.6
• /
• pp.748-760
• /
• 1995

Pyroelectric properties, figure of merits, and the other properties of the Pb(Zn1/3Nb2/3)O3-Pb(Fe1/2Nb1/2)O3 system, as expected to have excellent pyroelectric properties in the operating temperature range of pyroelectric type infrared sensor, were investigated. In the Pb(Zn1/3Nb2/3)O3-Pb(Fe1/2Nb1/2)O3 system, suppression of the pyrochlore phase depended on sintering condition, as like sintering temperature, holding time, sintering atmosphere. The specimen, sintered by the same composition atmosphere powder at 105$0^{\circ}C$ for 1.5h, possessed the best physical property. It was found that the piezoelectric parameters were mainly depended on the amount of spontaneous polarization and then the 0.2PZN-0.8PFN showed the best pyro- and piezoelectric properties. In terms of the experimental method, two pyroelectric-testing methods, i.e. static and dynamic methods, had a same tendency. Also the result of pyroelectric testing by the static method indicated that the diffuse phase transitiion resulted in the temperature difference of phase transition between dielectric constant and pyroelectric coefficient.

• Journal of Electrochemical Science and Technology
• /
• v.11 no.2
• /
• pp.117-131
• /
• 2020

The adsorption of N-[(E)-Pyridin-2-ylmethylidene] aniline, a Schiff base, on to mild steel surface in 1M HCl and 0.5 M H₂SO₄ solutions and the consequent corrosion protection were studied employing weight loss method, electrochemical impedance spectroscopy and potentiodynamic polarization measurements. DFT calculations were performed to investigate its interaction with the metal surface at the atomic level to understand its inhibition mechanism. The adsorption process is well described by the Langmuir isotherm. The thermodynamic parameters indicated that the adsorption is spontaneous and the interaction of the inhibitor at the mild steel surface is mainly through physisorption. The R_a values obtained in AFM studies for the uninhibited and inhibited sample in HCl media respectively are 0.756 and 0.559 ㎛, and that in H₂SO₄ media are 0.411 and 0.406 ㎛. The lesser roughness values of the inhibited sample shows the adsorption of the molecules onto the mild surface. The inhibition efficiencies were found to improve with concentration of the inhibitor and the maximum efficiency was observed at 400ppm in all the investigation methods adopted. The inhibitor was found to exhibit a higher efficiency in HCl media (95.7%) than in H₂SO₄ (92.8%). The theoretical and experimental results are found to be in good agreement.