• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.2
• /
• pp.31-43
• /
• 2019

In this study, polymer elastic bumps were fabricated for the flexible electronic package flip chip bonding and the viscoelastic and viscoplastic behavior of the polymer elastic bumps according to the temperature and load were analyzed using FEM and experiments. The polymer elastic bump is easy to deform by the bonding load, and it is confirmed that the bump height flatness problem is easily compensated and the stress concentration on thin chip is reduced remarkably. We also develop a spiral cap type and spoke cap type polymer elastic bump of $200{\mu}m$ diameter to complement Au metal cap crack phenomenon caused by excessive deformation of polymer elastic bump. The proposed polymer elastic bumps could reduce stress of metal wiring during bump deformation compared to metal cap bump, which is completely covered with metal wiring because the metal wiring on these bumps is partially patterned and easily deformable pattern. The spoke cap bump shows the lowest stress concentration in the metal wiring while maintaining the low contact resistance because the contact area between bump and pad was wider than that of the spiral cap bump.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.680-681
• /
• 2015

This paper proposes a comparative study of dual-airgap flux switching permanent magnet (FSPM) and spoke-type interior permanent magnet (S-IPM) machines equipped with phase-group concentrated-coil (PGCC) windings. Both of the investigated machines are the same size and material amounts which are compared at the same operating conditions. All the relevant machine performance including back electromotive force (EMF), cogging torque, and electromagnetic torque are analyzed by a 2-D time-stepping finite element method (FEM).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.12a
• /
• pp.58-62
• /
• 2006

The purpose of this paper is characteristic analysis of permanent magnet generator (PMG) for automatic voltage regulator (AVR)power of brush less synchronous generator. However, this PMG has a spoke type permanent magnet rotor with large overhang for high power density, characteristic analysis considering concentration effect of air-gap flux density due to the overhang should be performed. 30 transient finite element method (FEM)analysis is good solution for overhang parameter, but this method needs too much calculation time. In this paper, we examined the overhang effects based on overhang length and material of rotor core by using 20 and 30 static FEM analysis, and proposed 20 dynamic FEA model considering overhang parameter which gives good and rapid results. The proposed method is verified by the test results of no load, load and short circuit test.

• Journal of KIBIM
• /
• v.14 no.1
• /
• pp.30-38
• /
• 2024

This study aims to propose a smart city governance logic model that can accommodate more diverse information service systems by mixing hub-and-spoke and blockchain technologies as a data management model. Specifically, the research focuses on deriving the logic of an operating system that can work across smart city planning based on the two data governance technologies. The first step of the logic is the generation and collection of information, which is first divided into information that requires information protection and information that can be shared with the public, and the information that requires privacy is blockchainized, and the shared information is integrated and aggregated in a data hub. The next step is the processing and use of the information, which can actively use the blockchain technology, but for the information that can be shared other than the protected information, the governance logic is built in parallel with the hub-and-spoke type. Next is the logic of the distribution stage, where the key is to establish a service contact point between service providers and beneficiaries. Also, This study proposes the establishment of a one-to-one data exchange relationship between information providers, information consumers, and information processors. Finally, in order to expand and promote citizen participation opportunities through a reasonable compensation system in the operation of smart cities, we developed virtual currency as a local currency and designed an open operation logic of local virtual currency that can operate in the compensation dimension of information.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.233-234
• /
• 2010

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.2
• /
• pp.59-71
• /
• 2022

This study considered regional differences in the university-industry collaboration of Korean universities and performed cluster analysis to identify the spatial range with high university-industry collaboration connectivity. By university establishment type, it was found that the university-industry collaboration capacity of the major national university was superior overall, especially in the technology transfer & commercialization sector and the infrastructure sector, compared to private universities and general national universities. The spatial pattern of university-industry collaboration capacity showed relatively clear differences by city and province. In terms of university-industry collaboration capacity by sector, it was confirmed that the regional gap was not large in the talent training sector and the infrastructure sector, but the regional gap was relatively large in the technology transfer & commercialization sector and the start-up sector. As a result of the cluster analysis to identify a spatial range with high connectivity in terms of similarity and spatial proximity of university-industry collaboration patterns, it is divided into 15 clusters. It is found that most of major national universities are included in one of 15 clusters where all sectors of university-industry collaboration are strong. Therefore, as a policy measure to achieve regional innovative growth through enhancing the effectiveness of university-industry collaboration, we propose the establishment of a hub & spoke network-type collaboration system in which a major national university acts as a hub and nearby local universities play a spoke role.

• Journal of the Economic Geographical Society of Korea
• /
• v.27 no.1
• /
• pp.38-52
• /
• 2024

Digital transformation industry contributes to the improvement of productivity in overall industrial production, the smart green industry for carbon neutrality and sustainable growth is growing as a future industry. The purpose of this paper is to explore the status and role of the industry in the future industry innovation ecosystem through the analysis of the growth drivers and location pattern changes of the smart green industry. The industry is on the rise in both metropolitan and non-metropolitan areas, and the growth of the industry can be seen in non-metropolitan and non-urban areas. In particular, due to the smart green industrial complex pilot project, the creation of Gwangju Jeonnam Innovation City, and the promotion of new and renewable energy policies, the emergence of core aggregation areas (HH type) in the coastal areas of Honam and Chungcheongnam-do, and the formation of isolated centers (HL type) in the Gyeongsang region, new and renewable energy production companies are being accumulated in non-metropolitan areas. Therefore, the smart green industry is expected to promote the formation of various specialized spokes in non-urban areas in the future industrial innovation ecosystem that forms a multipolar hub-spoke network structure, where policy factors are the triggers for growth.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.3
• /
• pp.519-523
• /
• 2007

In this paper, we propose a precise parameter extraction of interior permanent magnet (IPM) motors based on finite element analysis. For the calculation of the two-axis inductances Ld and Lq, the slotting effect and cross magnetization due to torque angle are considered. It is examined that back electro-motive force (BEMF) constant is affected by the magnetic saturation in different ways dependent on motor types. Numerical analyses and some measurements are performed for a spoke type and a flux barrier type IPM motors

• Proceedings of the Korea Port Economic Association Conference
• /
• 2007.07a
• /
• pp.37-50
• /
• 2007

Taking advantage of geographical position of Korea located on the main route of world-wide service, Port Logistics Industry can be strategic industry which secures international competitiveness necessary for Korea to be hub of Northeast Asian's logistics. Along with the advent of super large container vessel, world ports environment changed from "milkway" type, which means vessel calls every port for service to "Hub & Spoke" type, which means vessel calls regional central port and feeder service for the rest ports. As environment changes, regional ports in Northeast Asia are competing each other tougher and tougher and introducing or developing port logistics information system based on state-of-the-art technology in order to adapt themselves to new environment, thus to be Hub port. Taking this situation into consideration, we want to define clearly the meaning and scope of port logistics IT and review the global trend of port logistics IT. Finally we want to find future development of port logistics IT which we have to achieve.

• Phonetics and Speech Sciences
• /
• v.8 no.3
• /
• pp.79-90
• /
• 2016

The purpose of this study was to investigate the effects of stuttering severity on articulation rate measured from different types of utterances in preschool children who stutter. Participants were 40 boys who stutter (CWS) and age-matched 10 boys who do not stutter (CWNS). CWS were sub-grouped based on the severity of their stuttering: 15 mild, 13 moderate, and 12 severe. Utterances were categorized as "overall utterance" including all utterances that children spoke and "fluent utterance" which did not contain any disfluencies. Utterances containing abnormal disfluencies were categorized as "SLD utterance" for CWS. The results revealed no significant difference among groups in any type of utterance. There were significant positive correlations in articulation rates between utterance types. Stuttering severity was not a factor for characterizing the articulation rate of each type of utterance. Also, current findings suggest that articulation rate may not predict speech motor control ability in preschool CWS.