• 수산경영론집
• /
• 제47권4호
• /
• pp.1-13
• /
• 2016

Fish mortality is the most important success factor in aquaculture management. To analyze the effect of mortality considering biological and economic condition is a important problem in land-based aquaculture. This study is aimed to analyze the effect of mortality for duration of cultivation in land-based aquaculture. This study builds the mathematical model that finds the value of decision variable to minimize cost that sums up the water pool usage cost, sorting cost, fingerling cost and feeding cost under critical standing corp constraint. The proposed mathematical model involves many aspects, both biological and economical: (1) number of fingerlings (2) timing and number of batch splitting event, based on (3) fish growth rate, (4) mortality, and (5) several farming expense. Numerical simulation model presented here in. The objective of numerical simulation is to provide for decision makers to analyse and comprehend the proposed model. When extensive biological and cost data become available, the proposed model can be widely applied to yield more accurate results.

• 경영과학
• /
• 제27권2호
• /
• pp.21-29
• /
• 2010

We consider an economic approach for spectrum operations in mobile networks. We present the investment function of base stations according to the number of FAs assuming the linearity of cell splitting. We show that there is an economic amount of spectrum which corresponds to the optimal number of FAs that minimizes the investment. We analyze the impact of the cost structure and the traffic distribution in base stations on the economic amount of spectrum. This paper is applicable to an economic spectrum operation for mobile operators. In addition, the national regulatory authority can use the economic amount of spectrum as the minimal amount for spectrum allocation.

• 조명전기설비학회논문지
• /
• 제27권2호
• /
• pp.29-35
• /
• 2013

For the purpose of designing and applying optimum surge protection, one of the essential points is to take into account the energy coordination between cascaded surge protective devices(SPDs) and it is important to obtain an acceptable sharing of the energy stress between two cascaded SPDs. In this paper, in case of two voltage-limiting SPDs connected in parallel, the amount of splitting impulse current and energy that flow through each SPDs is investigated as a function of the protective distance. As a result, the energetic coordination between cascaded SPDs is strongly dependent on the voltage protection level of SPDs and the protective distance. It was confirmed that the sharing of the energy between two cascaded SPDs and the limited voltage levels are appropriate when the voltage protection levels of both upstream and downstream SPDs are the same.

• Computers and Concrete
• /
• 제8권3호
• /
• pp.243-278
• /
• 2011

The paper presents simulations of the Brazilian test using two numerical models. Both models are regularized in order to obtain results independent of discretization. The first one, called gradient damage, is refined by additional averaging equation which contains gradient terms and an internal length scale as localization limiter. In the second one, called viscoplastic consistency model, the yield function depends on the viscoplastic strain rate. In this model regularization properties are governed by the assumed strain rate. The two models are implemented in the FEAP finite element package and compared in this paper. Parameter studies of the split test are performed in order to point out the features of each model.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.156-157
• /
• 2003

A simple method is proposed to split the flux vector of the Euler equations by introducing two artificial wave speeds. The direction of wave propagation can be adjusted by these two wave speeds. This idea greatly simplifies the upwinding, and leads to a new family of upwind schemes. Numerical flux function for multi-dimensional Euler equations is formulated for any grid system, structured or unstructured. A remarkable simplicity of the scheme is that it successfully achieves one-sided approximation for all waves without recourse to any matrix operation. Moreover, its accuracy is comparable with the exact Riemann solver. For 1-D Euler equations, the scheme actually surpasses the exact solver in avoiding expansion shocks without any additional entropy fix. The scheme can exactly resolve stationary contact discontinuities, and it is also freed of the carbuncle problem in multi­dimensional computations.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.408-415
• /
• 1997

Bond strength of reinforcing bar to high-performance concrete using Belite cement is explored using beam end test specimen. The key parameters for the bond test are slump of concrete, top bar effect, and strength of concrete in addition to concrete covers. Specimen failed in the typical brittle bond failure splitting the concrete cover as the wedging action. The test results show that for the group with portland cement I using superplasticizer additional slump does not decrease the bond strength of the top bar is less than bond strength of bottom bar, but the top bar factor satisfy the modification factor for top reinforcement. The result also show that bond strength is function of square root of concrete compressive strength and cover thickness. More detailed evaluation will be conducted from the test specimen with high strength concrete using the belite cement.

• 대한조선학회논문집
• /
• 제41권4호
• /
• pp.17-29
• /
• 2004

Internal waves are computed using a ghost fluid method on an unstructured grid. Discontinuities in density and dynamic pressure are captured in one cell without smearing or oscillations along a multimaterial interface. A time-accurate incompressible Navier-Stokes/Euler solver is developed based on a three-point backward difference formula for the physical time marching. Artificial compressibility is introduced with respect to pseudotime and an implicit method is used for the pseudotime iteration. To track evolution of an interface, a level set function is coupled with the governing equations. Roe's flux difference splitting method is used to calculate numerical fluxes of the coupled equations. To get higher order accuracy, dependent variables are reconstructed based on gradients which are calculated using Gauss theorem. For each edge crossing an interface, dynamic pressure is assigned for a ghost node to enforce the continuity of total pressure along the interface. Solitary internal waves are computed and the results are compared with other computational and experimental results.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.489-492
• /
• 2004

Compressive strength of self-compacting concrete with waste concrete powder(SCCWCP) linearly decreased as the containing ratio of WCP increas. When granulated blast furnace slag(SG) was contained for improving the rheological properties of SCCWCP, compressive strength of concrete with $15\%$ SG and $15\%$ WCP was increased in comparison with that of concrete with $30\%$ WCP. Splitting tensile strength of SCCWCP higher increased than that of CEB-FIP at same compressive strength. Relationship between compressive strength and elastic modulus of SCCWCP indicated a similar function with CEB-FIP fuction.

• Bulletin of the Korean Chemical Society
• /
• 제15권3호
• /
• pp.198-204
• /
• 1994

Chemical shifts in aqueous sodium dodecylsulfate(SDS) micellar solution solublizing phenol, catechol, resorcinol, hydroquinone have been measured to investigate solubilization properties. Proton nuclear magnetic resonance frequencies of solubilizates as well as those of the ${\alpha}$-methylene, middle methylene and terminal methyl of SDS shift linearly as a function of solubilizate concentration. From the plots of observed chemical shift (v) vs solubilizate concentration, slope (a) and solubilizate free chemical shift ($v_0$) are obtained. They are very informative to solubilization site of the systems. Catechol and phenol solubilized SDS and catechol solubilized dodecylpyridinium chloride(DPC), dodecyltrimethylammonium bromide(DTAB) systems are studied using the same method to compare head group effect and middle methylene proton signal splitting. It is proposed that phenol and catechol are inserted into micellar interior and the number of methylenes assigned to the higher field peaks is 5.0${\pm}$0.5.

• Journal of applied mathematics & informatics
• /
• 제41권2호
• /
• pp.321-330
• /
• 2023

Let G = (V, E) be a graph. Consider the group S₃. Let g : V (G) → S₃ be a function. For each edge xy assign the label 1 if ${\lceil}{\frac{o(g(x))+o(g(y))}{2}}{\rceil}$ is odd or 0 otherwise. g is a group S₃ mean cordial labeling if |v_g(i) - v_g(j)| ≤ 1 and |e_g(0) - e_g(1)| ≤ 1, where vg(i) and e_g(y)denote the number of vertices labeled with an element i and number of edges labeled with y (y = 0, 1). The graph G with group S₃ mean cordial labeling is called group S₃ mean cordial graph. In this paper, we discuss group S3 mean cordial labeling for star related graphs.