• Journal of Energy Engineering
• /
• v.15 no.2 s.46
• /
• pp.96-106
• /
• 2006

Among several different hydrogen production technologies, solar hydrogen system for water splitting is the only clean and sustainable energy supplier. Hydrogen production by water-splitting utilizing solar energy has attracted considerable interest since the pioneering work of Honda and Fujishima in 1979, who discovered that water can be photo-electrochemically decomposed into hydrogen and oxygen using a semiconductor ($TiO_2$) electrode under UV irradiation. Most efforts to utilize solar ray lead to explore visible responding photocatalysts, PEC cells and other fusion technology like bio-photocatalytic conversion. In this paper, photon utilization technologies for water splitting have been briefly reviewed except solar thermal utilization technology.

• Earthquakes and Structures
• /
• v.9 no.6
• /
• pp.1233-1250
• /
• 2015

The behavior of reinforced concrete (RC) columns made from high strength materials was investigated experimentally. Six high-strength concrete specimen columns (1:4 scale), which included three with high-strength transverse reinforcing bars and three with normal-strength transverse reinforcement, were tested under double curvature bending load. The effects of yielding strength and ratio of transverse reinforcement on the cracking patterns, hysteretic response, shear strength, ductility, strength reduction, energy dissipation and strain of reinforcement were studied. The test results indicated that all specimens failed in splitting failure, and specimens with high-strength transverse reinforcement exhibited better seismic performance than those with normal-strength transverse reinforcement. It also demonstrated that the strength of high-strength lateral reinforcing bars was fully utilized at the ultimate displacements. Shear strength formula of short concrete columns, which experienced a splitting failure, was proposed based on the Chinese concrete code. To enhance the applicability of the model, it was corroborated with 47 short concrete columns selected from the literature available. The results indicated that, the proposed method can give better predictions of shear strength for short columns that experienced a splitting failure than other shear strength models of ACI 318 and Chinese concrete codes.

• Korean Journal of Clinical Pharmacy
• /
• v.21 no.4
• /
• pp.347-352
• /
• 2011

Health insurance review & Assessment service (HIRA) has enforced cutting the drug costs when physicians prescribe split extended release drugs, starting from December, 2010. The objective of this study is to analyze extended release and enteric coated drugs on pharmaceutical reimbursement list in Korea, and to investigate the impact and barriers of the health insurance review on splitting extended-release formulation drugs. By using the ingredient code, extended release and enteric coated formulations make up 7.8% of all drugs in April, 2011. The most frequently used drugs are agent affecting circulatory and digestive system. From the extended release and enteric coated formulations (n=112), 34.8% (n=39) were not available in other dosage forms. According to questionnaire survey for 169 pharmacists (response rate: 73.8%), the rate of splitting and crushing of extended release and enteric coated drugs decreased. When pharmacists correct physician's prescription errors, the biggest problem was lack of other dosage forms. So it is necessary to develop variety of other dosage forms, and computerized checking system for splitting extended-release drugs. It is also important to inform physicians and patients in regard to the problems of split prescription of extended release and enteric coated drugs.

• The Journal of the Korean dental association
• /
• v.53 no.8
• /
• pp.545-557
• /
• 2015

The modified ridge splitting/expansion technique combined with guided bone regeneration (GBR) for implant surgery is used to expand the narrow and atrophied edentulous alveolar ridge. Also, the simultaneous implant placement after ridge splitting/expansion technique can reduce the treatment and healing time. This case report includes three patients with a narrow edentulous alveolar ridge of the 2 to 4mm. All three patients underwent a fracture of thin buccal cortical bone plate, and these defects were corrected by the use of the guided bone regeneration (GBR). After 7 to 18 months, all surgical area was stable, and all implant showed a good healing state on the clinical and radiographic examination. In conclusion, though this surgical method is technique sensitive, the modified ridge splitting/expansion technique combined with GBR for implant surgery is recommended for a horizontal augmentation in the narrow edentulous alveolar ridge.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.2
• /
• pp.23-29
• /
• 2011

In this experimental study, bond splitting strength and behavior were evaluated through pull-out tests. The tests were conducted on a GFRP rebar with roughened surface which was produced by Canadian manufacturer. The used variables in this study were rebar diameter, cover depth and compressive strength of concrete. For each variable, five specimens were made and tested to obtain good results. The bond splitting behavior was investigated from the relationship of pull-out force and slip. The experimental bond splitting strength was compared with the predicted strength obtained from the equations presented by some researchers. The results of the comparison demonstrated that the strength could be predicted well by using the Harajli et al's equation.

• Steel and Composite Structures
• /
• v.44 no.3
• /
• pp.389-406
• /
• 2022

Recycling concrete construction waste is an encouraging step toward green and sustainable building. A lot of research has been done on recycled aggregate concretes (RACs), but not nearly as much has been done on concrete made with recycled aggregate. Recycled aggregate concrete, on the other hand, has been found to have a lower mechanical productivity compared to conventional one. Accurately estimating the mechanical behavior of the concrete samples is a most important scientific topic in civil, structural, and construction engineering. This may prevent the need for excess time and effort and lead to economic considerations because experimental studies are often time-consuming, costly, and troublous. This study presents a comprehensive data-mining-based model for predicting the splitting tensile strength of recycled aggregate concrete modified with glass fiber and silica fume. For this purpose, first, 168 splitting tensile strength tests under different conditions have been performed in the laboratory, then based on the different conditions of each experiment, some variables are considered as input parameters to predict the splitting tensile strength. Then, three hybrid models as GWO-RF, GWO-MLP, and GWO-SVR, were utilized for this purpose. The results showed that all developed GWO-based hybrid predicting models have good agreement with measured experimental results. Significantly, the GWO-RF model has the best accuracy based on the model performance assessment criteria for training and testing data.

• Journal of the Chungcheong Mathematical Society
• /
• v.10 no.1
• /
• pp.147-159
• /
• 1997

It is important to solve the large sparse linear system appeared in many application field such as $AA^Ty={\beta}$ efficiently. In solving this linear system, the sparse solver using the splitting method for the relatively dense column is experimentally better than the direct solver using the Cholesky method.

• Journal of the Chungcheong Mathematical Society
• /
• v.30 no.2
• /
• pp.177-181
• /
• 2017

Let $f:M{\rightarrow}M$ be a diffeomorphism of a compact smooth manifold M. In this paper, we show that $C^1$ generically, if a chain transitive set ${\Lambda}$ is locally maximal then it admits a dominated splitting. Moreover, $C^1$ generically if a chain transitive set ${\Lambda}$ of f is locally maximal then it has zero entropy.

• Journal of applied mathematics & informatics
• /
• v.29 no.5_6
• /
• pp.1067-1074
• /
• 2011

In this paper, a preconditioned mixed-type splitting iterative method for solving the linear systems Ax = b is presented, where A is a Z-matrix. Then we also obtain some results to show that the rate of convergence of our method is faster than that of the preconditioned AOR (PAOR) iterative method and preconditioned SOR (PSOR) iterative method. Finally, we give one numerical example to illustrate our results.

• Korean Management Science Review
• /
• v.14 no.2
• /
• pp.69-79
• /
• 1997

The computational speed of interior point method of linear programming depends on the speed of Cholesky factorization. If the coefficient matrix A has dense columns then the matrix A.THETA. $A^{T}$ becomes a dense matrix. This causes Cholesky factorization to be slow. We study an efficient implementation method of the dense column splitting among dense column resolving technique and analyze the relation between dense column splitting and order methods to improve the sparsity of Cholesky factoror.