• 전자공학회논문지B
• /
• 제33B권2호
• /
• pp.217-226
• /
• 1996

Switched reluctance motor (SRM) drives appear today as viable alternatives to induction and brushless motor drives in a wide range of application such as machine tools, fans, and pumps. This paper deals with a new converter topology which can be used in order converter. The split source type converter consists of minimum switching devices to be used in switched reluctance motor (SRM) drive. In this proposed converter two switches and six diodes are added to split source type converter. The proposed converter has performance minimizes the negative torque, Which puts the phase current off by double impressed voltages. The major advangtage of this converter is the increase of the average output power while improving better converter efficiency in heavy load and high speed than other topologies. The proposed converter system has been implemented using 80C196KB microcontroller and experiments were carried out ot verify the simulation results.

• 한국정보전자통신기술학회논문지
• /
• 제8권4호
• /
• pp.257-262
• /
• 2015

본 논문에서는 SRR-DGS 공진기를 제안하고 그것의 등가회로를 해석하여 저역통과 필터 설계에 적용하였다. 기존의 덤벨형 DGS 구조로 된 것과 비교하였을 때 제안된 구조는 차단주파수 근처에서 스커트 특성과 저주파 대역의 평탄도 특성이 우수하였다. 기본적인 SRR-DGS 셀에서 등가회로의 병렬 커패시턴스를 증가하기 위해 전송선로에 개방 스터브를 추가함으로써 대역외 고주파 억압 특성을 개선하였다. 이와 같은 등가회로의 해석적인 방법으로 개선된 SRR-DGS 셀의 특성이 연구되어 차단 특성이 우수하고 고주파 억압 특성이 35dB이상인 저역통과 필터의 설계에 적용되었다. 그리고 공진기의 측면 길이와 링 간격 등과 같은 물리적 크기와 전송특성과의 관계를 해석하여 나타내었다. 개방 스터브의 면적을 증가하면 차단 주파수 이상의 대역에서 억압 특성이 개선되었다. SRR-DGS에 대해 유도해낸 등가 파라미터와 회로의 정확성을 검증하기 위해 SRR-DGS셀을 이용한 저역통과 필터를 설계하고 제작하였다.

• 한국운동역학회지
• /
• 제27권4호
• /
• pp.239-245
• /
• 2017

Objective: The bobsleigh shoes used in the start section are one of the most important equipment for improving the competition. Despite the importance of the start section, there are no shoes that are specific for bobsleigh athletes in Korea and Korean athletes have to wear sprint spike shoes and practice the start instead of wearing bobsleigh shoes. The objective of the present study was to provide data for improving the performance of Korean bobsleigh athletes by investigating the differences in their split time, plantar pressure, and forefoot bending angle based on skill levels at the start of a run under the same conditions as training conditions. Method: Six Korean bobsleigh athletes were divided into two groups, superior (n=3) and non-superior (n=3). A digital speedometer measured the split time at the start; the Pedar-X system (Novel, Germany) measured plantar pressure. Plantar pressures and split times were measured as the athletes pushed a bobsleigh and sprinted at full speed from the start line to the 10-m mark on the bobsleigh track. An ultra-high-speed camera was used to measure the forefoot bending angle during the start phase. Results: Significant between-group differences were found in split times (p<.000; superior = 2.38 s, non-superior = 2.52 s). The superior group had a larger rearfoot (p<.05) contact area, maximum rearfoot force (p<.01), and a larger change in angles 3 and 4 (p<.05). Conclusion: At the start of a bobsleigh run, proper use of the rearfoot for achieving effective driving force and increasing frictional resistance through a wider frictional force can shorten start time.

• 수산해양기술연구
• /
• 제46권2호
• /
• pp.173-183
• /
• 2010

In a split beam echo sounder, the transducer design needs to have minimal side lobes because the angular position and level of the side lobes establishes the usable signal level and phase angle limits for determining target strength. In order to suppress effectively the generation of unwanted side lobes in the directivity pattern of split beam transducer, the spacing and size of the transducer elements need to be controlled less than half of a wavelength. With this purpose, a 50 kHz tonpilz type transducer with a half-wavelength diameter in relation to the development of a split beam transducer was designed using the equivalent circuit model, and the underwater performance characteristics were measured and analyzed. From the in-air and in-water impedance responses, the measured value of the electro-acoustic conversion efficiency for the designed transducer was 51.6%. A maximum transmitting voltage response (TVR) value of 172.25dB re $1{\mu}Pa/V$ at 1m was achieved at 52.92kHz with a specially designed matching network and the quality factor was 10.3 with the transmitting bandwidth of 5.14kHz. A maximum receiving sensitivity (SRT) of -183.57dB re $1V/{\mu}Pa$ was measured at 51.45kHz and the receiving bandwidth at -3dB was 1.71kHz. These results suggest that the designed tonpilz type transducer can be effectively used in the development of a split beam transducer for a 50kHz fish sizing echo sounder.

• 수산해양기술연구
• /
• 제37권3호
• /
• pp.196-213
• /
• 2001

체장어군탐지기(fish sizing echo sounder) 의송.수파기로서 사용하기 위한 split beam 음향 변환기를 개발하기 위한 시도로서, Dolph Chebyshev배열 기법을 이용하여 36개의 압전 진동소자에 진폭 가중치를 부여한 평면배열 음향 변환기를 설계.제작하고, 이 변환기의 수중음향방사 특성에 대해 분석.고찰한 결과를 요약하면 다음과 같다. 1. split beam 음향 변환기의 4 개의 독립적인 진동자 블록에 대한 수중에서의 평균적인 공진 및 반공진 주파수는 각각 69.8 kHz. 83.0 kHz이었고, 이들 공진과 반공진 주파수에서의 임피던스는 49.2$\omaga$. 704.7$\omaga$이었다. 음향변환기의 4 개의 모든 진동자 블록 (sum beam)에 대한 수중에서의 공진 및 반공진 주파수는 각각 71.4 kHz, 82.1kHz이었고. 이들 공진과 반공진 주파수에서의 임피던스는 15.2$\omaga$, 17.3$\omaga$이었다. 2 split beam 음향 변환기의 4 개의 독립적인 진동자 블록에 대한 최대 송파전압감도(TVR)는 공통적으로 70.0 kHz에서 165.5 dB이었고, -3 dB 점에 대한 송신 주파수 대역폭은 10.0 kHz이었다. 또한. split beam 음향 변환기의 4 개의 조합된 진동자 블록에 대한 최대 수파감도(SRT)는 공통적으로 75.0 kHz에서 -177.5 dB이었고, -3 dB 점에 대한 수신 주파수 대역폭은 10.0 kHz이었다. 3.split beam 음향 변환기의 모든 진동자 블록에 대한 송신 지향성패턴은 원형이었고, -3 dB점에 대한 수평 및 수직방향에 대한 반감각(half beam angle)은 공통적으로 $9.0^\circ$이었다. 또한. 수평방향에 대한 제 1차 부엽 준위는 $22^\circ$및 $-26^\circ$에서 각각 -19.7 dB. -19.4 dB이었고. 수직방향에 대한 제1차 부엽 준위는 $22^\circ$및 $-26^\circ$에서 각각 -20.1 dB, -22.0 dB로서 설계 목표치 -20 dB과 매우 유사한 값을 나타내었다. 4.split beam 음향 변환기의 송파응답파형과 수파응답파형은 각각 송신 및 수신 공진주파수 부근인 70.0 kHz와 75.0 kHz에서 전기 입력펄스파형과 가장 유사한 특성을 나타내었다. 5. 본 연구에서 설계, 개발한 split beam 음향 변환기의 성능을 분석하기 위해 반사강도 보정을 위한 지향성손실과 물표의 위치각을 추정하기 위한 실험을 행한 결과 실험적으로 추정한 위치각은 실제적인 위치각과 잘 일치하였다.

• 대한전자공학회논문지TC
• /
• 제47권11호
• /
• pp.69-76
• /
• 2010

본 논문에서는 X-Band 모노펄스 레이더 RF 프론트 엔드에서 국부발진 신호를 동일 진폭, 동일 위상으로 분배하는 도파관 천이 구조를 갖는 4-Way 윌킨슨 분배기 설계에 대해 연구하였다. X-Band에서 동작하는 모노펄스 레이더 프론트 엔드는 합, 방위각 및 고각 신호를 하강변환 하는 3개의 도파관 수신믹서와 체계 연동시 X-Band 시험신호를 발생하는 SSB 도파관 믹서로 구성된다. 프론트 엔드를 구성하는 각 믹서에 국부발진(LO : Local oscillator) 신호를 입력하기 위해서는 저 손실 특성을 가지면서 동일 전력 레벨과 동 위상으로 LO 전력을 분배하는 4-Way 분배기가 요구된다. 본 논문에서는 저 손실, 동위상으로 LO 신호를 분배하기 위해 도파관 천이 구조를 갖는 4-Way 윌킨슨 분배기를 설계/제작 하였다. 제작된 윌킨슨 전력 분배기는 X-Band에서 삽입손실이 평균 6.8dB, VSWR은 1.06~1.28였으며, 이때 각 단자 출력 위상차는 최대 4.5도 이내를 유지하였다.

• 대한산업공학회지
• /
• 제31권1호
• /
• pp.20-26
• /
• 2005

This paper proposes the heuristic algorithm for the generalized GT problems to consider the restrictions which are given the number of machine cell and maximum number of machines in machine cell as well as minimum number of machines in machine cell. This approach is split into two phase. In the first phase, we use the similarity coefficient which proposes and calculates the similarity values about each pair of all machines and sort these values descending order. If we have a machine pair which has the largest similarity coefficient and adheres strictly to the constraint about birds of a different feather (BODF) in a machine cell, then we assign the machine to the machine cell. In the second phase, we assign parts into machine cell with the smallest number of exceptional elements. The results give a machine-part grouping. The proposed algorithm is compared to the Modified p-median model for machine-part grouping.

• 대한산업공학회지
• /
• 제31권1호
• /
• pp.1-9
• /
• 2005

This paper proposes the heuristic algorithm for the generalized GT problems to consider the restrictions which are given the number of machine cell and maximum number of machines in machine cell as well as minimum number of machines in machine cell. This approach is split into two phase. In the first phase, we use the similarity coefficient which proposes and calculates the similarity values about each pair of all machines and sort these values descending order. If we have a machine pair which has the largest similarity coefficient and adheres strictly to the constraint about birds of a different feather (BODF) in a machine cell, then we assign the machine to the machine cell. In the second phase, we assign parts into machine cell with the smallest number of exceptional elements. The results give a machine-part grouping. The proposed algorithm is compared to the Modified p-median model for machine-part grouping.

• 한국한의학연구원논문집
• /
• 제15권2호
• /
• pp.33-37
• /
• 2009

Objectives : The authors performed this study to further understand Saam acupuncture method in an aspect of formation process. Methods : We were finding Saam's idea in a preface of the book. And we analyzed Saam acupuncture patterns to understand their formation. Results & Conclusion : We assume that Saam acupuncture patterns has formed over time. We were able to split their patters into three phases. That is Primitive-phase, Basic-phase and Practical-phase. We think they are traces of Formation Process. In the first, Saam found DongHaeng-acupoints that have in common Five Element between the five viscera and acupoint. And then, he compounded other meridian's DongHeng-acupoints to control self meridian. Finally acupoints of self meridian were added.

• 조명전기설비학회논문지
• /
• 제29권2호
• /
• pp.54-61
• /
• 2015

In 3-phase 4-wire inverter, the unbalanced loads cause to increase the neutral current which brings the voltage deviation between the split dc-link capacitors to be larger. In order to solve this problem, a neutral leg is provided additively to the ordinary inverter circuit and the associated control methods are devised. This paper proposes a new neutral-leg controller based on a PR controller and shows relatively good performance even under unbalanced linear loads and nonlinear loads. The proposed control strategy illustrates its effectiveness under the various operating conditions through simulation works.