• International Journal of Vascular Biomedical Engineering
• /
• v.2 no.1
• /
• pp.11-16
• /
• 2004

Both flow visualizations and computational fluid dynamics were performed to determine hemodynamics in a total cavopulmonary connection (TCPC) model for surgically correcting congenital heart defects. From magnetic resonance images, an anatomically correct glass model was fabricated to visualize steady flow. The total flow rates were 4, 6 and 8L/min and flow rates from SVC and IVC were 40:60. The flow split ratio between LPA and RPA was varied by 70:30, 60:40 and 50:50. A pressure-based finite-volume software was used to solve steady flow dynamics in TCPC models. Results showed that superior vena cava(SVC) and inferior vena cava(IVC) flow merged directly to the intra-atrial conduit, creating two large vortices. Significant swirl motions were observed in the intra-atrial conduit and pulmonary arteries. Flow collision or swirling flow resulted in energy loss in TCPC models. In addition, a large intra-atrial channel or a sharp bend in TCPC geometries could influence on energy losses. Energy conservation was efficient when flow rates in pulmonary branches were balanced. In order to increase energy efficiency in Fontan operations, it is necessary to remove a flow collision in the intra-atrial channel and a sharp bend in the pulmonary bifurcation.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.49 no.4
• /
• pp.368-376
• /
• 2013

Fishing experiments were carried out in the adjacent sea of Yeongil Bay, the eastern cost of Korea from 2003 to 2004 using the dome-shaped pots with different five mesh sizes (17.1, 24.8, 35.3, 39.8, and 48.3mm) in order to determine the size selectivity of pots for the whelk, Buccinum opisthoplectum. The catch species were composed of Buccinum opisthoplectum (45.4%), Buccinum striatissimum (30.1%), Pandalopsis japonica (9.3%), Chionoecetes opilio (8.9%), and so on. The shell height (l) of Buccinum opisthoplectum caught in the experimental fishing pots was measured. The SELECT (Share Each Length's Catch Total) analysis method was applied with fishing data to obtain master selection curve. The model with the estimated split parameter was found to fit the catch data best. The master selection curve was estimated to be s (R)〓exp (7.833R-10.871)/[1 + exp (7.833R-10.871], where R is the ratio of shell height to mesh size. The relative shell length for 50% retention was 1.388, and the selection range was 0.281. It means that the pots of larger mesh size allow more whelks of small size to escape.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.16 no.1
• /
• pp.27-38
• /
• 1996

This study was conducted to evaluate the potential of Festulolium braunii(Festuca pratensis Huds. $\times$ Loliurn mulrijZorum Lam.)as forge sources. The experiment was arranged in a split plot design with four replications from Feb. 1995. to Jan. 1996 at Hohenheim university. Main plots consisted of three forage species, Festulolirtrn braunii(Paulita), Lolium multiJomm(Lemtla), and Secale cereale(Halo) and subplots consisted of three maturity, boot, heading, and anthesis. The growth characteristics, DM yields, nutritive value, N and energy balance were observed. The heading date of Festulolium braunii was about two days earlier than that of Loliunz mrtltiflorum, farthermore Fesrulolium braunii retained higher leaf weight ratio(LWR) than other species. Festulolium brarrnii failed to show any significant differences in grass length, number of tillers, LAI, CGR, and DM accumulation when harvested at the same stage of maturity as compare with Loliurn mulriiflorutn or Setale cerede, bur the content of CP, OMD, and mineral elements and NEL value of Festulolium braunii compare to othes were slightly increased(P<0.05), while the content of NDF, ADF, and lignin decreased(P<0.05). The yield of CP was greater for Festulolium braunii than for Lolium multfimm and yields of DOM and NEL per unit area(ha) for Festulolium braunii were greater than for other species(P<0.05). The equivalent or higher DM production and nutritive value are obtained when Festulolium braunii are cut during the period from boot to anthesis stages, therefor DM intake, preference, and N and energy balance were also higher for Festulolirtm braunii compare to for other species. It could be suggested that Lolium multrfirum would be a more suitable substitute to Festuloliron braunii without decreasing forage production and quality, but the substitutive effect of Secale cereale would be difficult because of the maor differences in growth type and period compare to Fesrulolium braunii. From above the results of this experiment it appears that Festulolium braunii have a potential to provide forage sources. but funher research is needed to ascertain their potential under the climate of Korea.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.17 no.1
• /
• pp.1-9
• /
• 1995

We observed 117 orthognathic surgery cases with dentofacial deformity for 8 years from Jan. 1986 to Dec. 1993. The ratio of male female was 1 : 1.4 and the mean age was 23.0 years ranged from 16 to 35 years. The most dominant group was related to mandibular prognathism (75.0%). Surgery method were divided into 88 cases of mandible surgery, 6 cases of maxilla surgery and 23 cases of two jaw surgery. Sagittal split osteotomy were performed on 84 cases (71.8%). Rigid fixation was increased after 1989 and total percent of rigid fixation was 66%. We used autotransfusion method from 1992 to all orthognathic surgery patient. Lower lip numbness caused by Inferior alveolar nerve injury is the most common problem after operation, and it was 63 cases (53.8%) of total operation cases. In our clinic, we performed 5 cases of re-operation because of segment malalignment, condylar sag, and fixation instability.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.2 no.1 s.2
• /
• pp.63-73
• /
• 2003

COSMOS(Cycle, Offset, Split Model for Seoul), a real-time traffic adaptive signal system. estimates queue lengths on each approach on the basis of arithmetic average spot speeds calculated on loop detectors installed at each of two adjacent lanes. In this paper, A new method, a traffic volume-weighted average method, was studied and compared with the existing arithmetic average method. It was found that the relationship between the ratio of volumes of two lanes and the difference of average speed of each lane has a linear form. With field data, The two methods were applied and the proposed method shows more stable and reasonable queue estimation results.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.4
• /
• pp.414-420
• /
• 2017

The thermal characteristics of concrete fabricated with blast furnace slag were investigated in this paper. Test parameters included water-binder ratio and the content of furnace slag. Experimental program were performed to measure mechanical properties including compressive strength and split tensile strength under high-temperature thermal cycling, and to measure thermal properties including thermal conductivity and specific heat. Test results showed that the residual compressive strength of mixtures with blast furnace slag was greater than that of mixture without blast furnace slag. In addition, thermal conductivity of mixtures with blast furnace slag was greater than that of mixtures without blast furnace slag. It indicates that blast furnace slag was favorable for charging and discharging in thermal energy storage system. Test results of this study would be used to design concrete module system of thermal energy storage.

• Fashion & Textile Research Journal
• /
• v.11 no.5
• /
• pp.788-798
• /
• 2009

This study aims to develop a highly reproducible, optimal frame design algorithm using variations in the curvature of armscye circumference, which will provide the basics for remodeling the 3D human body shape with the concept of reverse design used to develop total contents for the apparel industry. 1. The results of the experiment proved that ratio value was significantly efficient than absolute value of curvature variation to extract feature points in the armscye circumference 2. For the shoulder(1st and 2nd quadrant) and front armhole(3rd quadrant) parts of the armscye circumference, frame remodeling with the positive point of inflection led to the completion of a highly reproducible frame. 3. Similarly, even for the rear armhole part(4th quadrant) in the armscye circumference, it was found that frame remodeling using the positive maximum point of inflection resulted in highly reproducible body shape with the maximum point of inflection situated within the range of split angles $305^{\circ}{\sim}330^{\circ}$, while frame remodeling using simultaneously the two largest points of inflection including maximum point of inflection led to highly reproducible body shape with the maximum point of inflection out of the range $305^{\circ}{\sim}330^{\circ}$. 4. Based upon the optimal frame design algorithm developed in this study, section-specific feature points in the armscye circumference were extracted depending on the rate of curvature variation and remodeling with spline curves was conducted. The results indicate a remarkably high reproducibility(98.6%) and suggest that the algorithm developed in this study is suitable for human body modeling.

• Advances in concrete construction
• /
• v.9 no.2
• /
• pp.207-215
• /
• 2020

This paper describes the experimental studies carried out to determine the properties of fresh and hardened concrete with Recycled Plastic Waste (RPW) as a partial replacement material for fine aggregates. In the experimental study, RPW was used for replacing river sand and manufactured sand (M sand) aggregates in concrete. The replacement level of fine aggregates was ranging from 5% to 20% by volume with an increment of 5%. M40 grade of concrete with water cement ratio of 0.40 was used in this study. Two different types of RPW were used, and they are (i) un-activated RPW and (ii) activated RPW. The activated RPW was obtained by alkali activation of un-activated RPW using NaOH solution. The hardened properties of the concrete determined were dry density, compressive strength, split tensile strength, flexural strength and ultrasonic pulse velocity (UPV). The properties of the concrete with river sand, M sand, activated RPW and un-activated RPW were compared and inferences were drawn. The effect of activation using NaOH solution was investigated using FT-IR study. The micro structural examination of hardened concrete was carried out using Scanning Electron Microscopy (SEM). The test results show that the strength of concrete with activated RPW was more than that of un-activated RPW. From the results, it is evident that it is feasible to use 5% un-activated RPW and 15% activated RPW as fine aggregates for making concrete without affecting the strength properties.

• Journal of the Optical Society of Korea
• /
• v.20 no.4
• /
• pp.488-499
• /
• 2016

We present a design and optical simulation of a cost-effective hybrid daylighting/LED system composed of mixing sunlight and light-emitting diode (LED) illumination powered by renewable solar energy for indoor lighting. In this approach, the sunlight collected by the concentrator is split into visible and non-visible rays by a beam splitter. The proposed sunlight collector consists of a Fresnel lens array. The non-visible rays are absorbed by the solar photovoltaic devices to provide electrical power for the LEDs. The visible rays passing through the beam splitters are coupled to a stepped thickness waveguide (STW) by tilted mirrors and confined by total internal reflection (TIR). LEDs are integrated at the end of the STW to improve the lighting quality. LEDs’ light and sunlight are mixed in the waveguide and they are coupled into an optical fiber bundle for indoor illumination. An optical sensor and lighting control system are used to control the LED light flow to ensure that the total output flux for indoor lighting is a fixed value when the sunlight is inadequate. The daylighting capacity was modeled and simulated with a commercial ray tracing software (Lighttools^TM). Results show that the system can achieve 63.8% optical efficiency at geometrical concentration ratio of 630. A required accuracy of sun tracking system achieved more than ±0.5^o . Therefore, our results provide an important breakthrough for the commercialization of large scale optical fiber daylighting systems that are faced with challenges related to high costs.

• Journal of Plant Biology
• /
• v.12 no.2
• /
• pp.28-42
• /
• 1969

Field studies were conducted with the split plot design of 20 treatment with a combination of 4 levels of 3, 5, 7 and 9 plants per hill and 5 levels of 60, 80, 100, 120 and 140 hills per 3.3$m^2$ on non-, low- and high-salty areas. Rice variety, Kusabue was grown under jthe standard fertilization and cultivating. Investigation was made on the productive structure of plant population, leaf-area index, light intensity curve by stratum of crop population at the panicle differentiation stage. The competition density effect on the photosynthetic capacity was low as the salt concentration became higher. This seemed to suggest the possiblity of an increased yielding capacity by closer planting in the salty areas. The effect of an increased number of hills per unit area was greater than that of an increased unmber of plants per hill due to the total leaf area and space distribution of the actie assimilation parts of rice plants. The number of ppanicle per unit area in the salty areas were increased when the number of hill per 3.3$m^2$ increased over an increased number of plants per hill, and the panicle weight was reduced by close planting in the non-lalty area, while it was not reduced so much in the salty areas. The number of grains per panicle was significantly decreased by close planting in the salty areas as in the non-salty area, and ratio of matured grain was not decreased even by close planting in the salty areas, while it was significantly decreased by close planting in the non-salty area. An increase in the rice yield was possible by close planting and greatly related to leaf area index in the salty areas but not in the non-salty area. Increasing the number of hills per unit area showed greater effect on the increase of the rice yield than an increased number of plants per hill in the salty areas. Relationships between the growth characteristics and the rice population affected by plant spacing mode for maximum production were discussed.