• Journal of Korean Dental Science
• /
• v.3 no.1
• /
• pp.39-42
• /
• 2010

This case report presents a case that underwent three-piece segmental maxillary osteotomy and sagittal split ramus osteotomy on a patient with severe facial asymmetry accompanied by maxillary prognathism, severe left scissor bite, and chin point deviation. The resulting facial appearance and occlusion were improved, thereby three-piece segmental maxillary osteotomy is regarded effective methed in treating severe facial asymmetry.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.1
• /
• pp.219-230
• /
• 1995

The flow characteristics of a two-dimensional offset jet issuing parallel to a rough wall is experimentally investigated by using a split film probe with the modified Stock's calibration method. The mean velocity and turbulent stresses profiles in the up and down-stream locations of the wall-attachment regions are measured and compared with those of the smooth wall attaching offset jet cases. It is found that the wall-attachment region on the rough wall is wider than on the smooth wall for the same offset height and the jet speed. The position of the maximum velocity point is farther away from the wall than that for the smooth wall case because of the thick wall boundary layer established by the surface roughness. It is concluded that the roughness of the wall accelerates the relaxation process to a redeveloped plane wall jet and produces a quite different turbulent diffusion behavior especially near the wall from comparing with the smooth plane wall jet turbulence.

• Wind and Structures
• /
• v.20 no.3
• /
• pp.423-448
• /
• 2015

In this paper the unsteady fluid-structure interaction (FSI) problems with large structural displacement are solved by partitioned solution approaches in the arbitrary Lagrangian-Eulerian finite element framework. The incompressible Navier-Stokes equations are solved by the characteristic-based split (CBS) scheme. Both a rigid body and a geometrically nonlinear solid are considered as the structural models. The latter is solved by Newton-Raphson procedure. The equation governing the structural motion is advanced by Newmark-${\beta}$ method in time. The dynamic mesh is updated by using moving submesh approach that cooperates with the ortho-semi-torsional spring analogy method. A mass source term (MST) is introduced into the CBS scheme to satisfy geometric conservation law. Three partitioned coupling strategies are developed to take FSI into account, involving the explicit, implicit and semi-implicit schemes. The semi-implicit scheme is a mixture of the explicit and implicit coupling schemes due to the fluid projection splitting. In this scheme MST is renewed for interfacial elements. Fixed-point algorithm with Aitken's ${\Delta}^2$ method is carried out to couple different solvers within the implicit and semi-implicit schemes. Flow-induced vibrations of a bridge deck and a flexible cantilever behind an obstacle are analyzed to test the performance of the proposed methods. The overall numerical results agree well with the existing data, demonstrating the validity and applicability of the present approaches.

• Journal of Korean Academy of Nursing
• /
• v.45 no.5
• /
• pp.650-660
• /
• 2015

Purpose: The purpose of this study was to develop an instrument to measure the parenting behavior of primary caregivers of children in early childhood. Methods: An instrument was developed according to Devellis's instrument development process. The participants in this study who completed the main survey were 370 mothers and grandmothers. The survey was conducted from June 1 to July 30, 2014, and collected data were analyzed using item analysis, half-split reliability and Cronbach's ${\alpha}$ coefficient, exploratory and confirmatory factor analysis, convergent validity. Results: The factor structure of the instrument showed the cumulative variance as 55.7% in the factor analysis. As a result of a confirmatory factor analysis, a four-factor structure was found to be appropriate, and the construct validity and convergent validity of the instrument were thereby confirmed. The finalized parenting behavior instrument consisted of 26 items and four independent factors: affectionate, laissez-faire, educational and impulsive. A five-point Likert scale was employed, and a higher score in a particular factor showed that most of the behaviors belonged to the factor. Conclusion: The instrument developed in this study was found to be reliable and valid, and can be used to develop parent-child relationship building.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.4E
• /
• pp.52-60
• /
• 2001

This paper describes real time implementation of subband sound localization system on a floating-point DSP TI TMS320C31. The system determines two dimensional location of an active speaker in a closed room environment with real noise presents. The system consists of an two microphone array connected to TI DSP hosted by PC. The implemented sound localization algorithm is Subband CPSP which is an improved version of traditional CPSP (Cross-Power Spectrum Phase) method. The algorithm first split the input speech signal into arbitrary number of subband using subband filter banks and calculate the CPSP in each subband. It then averages out the CPSP results on each subband and compute a source location estimate. The proposed algorithm has an advantage over CPSP such that it minimize the overall estimation error in source location by limiting the specific band dominant noise to that subband. As a result, it makes possible to set up a robust real time sound localization system. For real time simulation, the input speech is captured using two microphone and digitized by the DSP at sampling rate 8192 hz, 16 bit/sample. The source location is then estimated at once per second to satisfy real-time computational constraints. The performance of the proposed system is confirmed by several real time simulation of the speech at a distance of 1m, 2m, 3m with various speech source locations and it shows over 5% accuracy improvement for the source location estimation.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.5
• /
• pp.48-56
• /
• 2016

In this paper, we analyze the power flow of an eight-speed automatic transmission by using a lever analogy for the manufacturing of planetary gears. The results indicate that the engine power is passed down to the carrier and ring gear in the first double pinion planetary gear (DPPG1), and to the sun gear, carrier, and ring gear in DPPG3 for the first speed. Although the power flow is similar in the second speed, the power circulation occurs in the second single pinion planetary gear (SPPG2). For the third speed, the engine power is passed from the carrier to the ring gear in DPPG, at which point the power is split between the sun gears of SPPG2 and DPPG3.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.32 no.6
• /
• pp.559-565
• /
• 2006

The aim of this study was to evaluate the amount and interrelationship of the soft and hard tissue changes after simultaneous maxillary clockwise rotation and mandibular setback surgery in skeletal class III malocclusion. The sample comprised of 16 adult patients who had anteroposterior skeletal discrepancy. These patients had received presurgical orthodontic treatment and surgical treatment which consisted of Le fort I Osteotomy and bilateral saggital split ramus osteotomy. The presurgical (T1) and postsurgical (T2) lateral cephalograms were evaluated. The computerized statistical analysis was carried out with SPSS/PC program. The results demonstrated a decrease in the vertical dimension in the soft and hard tissue. The nasolabial angle was increased and the mentolabial angle was decreased. The results showed also many statistically significant correlations(p<0.05). The lower lip closely followed the skeletal movement of the B- point in the horizontal plane. The double jaw rotation surgery can afford a good solution to solve the problems of class III malocclusion cases.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10c
• /
• pp.429-431
• /
• 1998

본 논문에서는 의료 영상 중에서 성대 운동의 불규칙적인 움직임을 판단하여 자동으로 진단 파라미터를 구하는 비디오스트로보키모그래피(Videostrobokymography) 시스템에서 관심 영역을 추출하는 방법을 소개하고자 한다. CCD카메라에 의해 촬영된 영상은 비디오 테이프에 저장된 후 이미지 캡쳐 보드에서 그레이 이미지(gray-level)로 변환되어 저장된다. 입력된 영상은 움직이는 영상을 촬영한 것이므로 관심 영역의 위치가 각 프레임마다 다르다. 또한 실제로 입력된 성대영상들이 점진적인 농도 변화를 보이기 때문에 에지에 의해 영역을 추출하는 일반적인 영역 추출방법은 사용하기 어렵다. 본 논문에서는 두 번의 단계를 통하여 관심 영역을 추출하고 있다. 첫 번째는 입력된 영상에서 노이즈를 제거한 후 각 프레임에서 영상의 최소 에너지를 구한다. 두 번째로 농도 변화 값을 특징 값으로 이용하는 분할-합병 알고리즘(Split-merge Algorithm)을 적용하여 관심 영역을 추출하였다. 제안한 알고리즘을 19명의 성대 영상에 적용하여 분석한 결과 성대의 관심 영역을 추출할 수 있었다. 그리고, 영상의 에너지 값을 이용하는 스네이크 알고리즘(Snake Algorithm)에 적용하여 비교해본 결과 본 연구에서 제안하는 스네이크 알고리즘보다 좋은 성능을 보임을 확인할 수 있었다. 본 연구에서 제안하는 관심 영역 추출 방법은 동적인 변화를 보이는 영상에서 관심 영역을 추출할 수 있을 뿐 아니라 계산 량이 적어 200x280크기의 이미지를 초당 약 40프레임에 대한 관심 영역을 추출할 수 있는 장점이 있다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.05a
• /
• pp.5-8
• /
• 2006

High strength concrete has been increasingly used in high rue building and it is very obvious re consider fire resistance performance of that. Unlike the normal strength concrete, high strength concrete in sudden elevating temperature at fire is susceptible to spalling with severe explosion and surface split, due to high density of concrete. In order to endure the spalling, inner space temperature of concrete should be control less than certain point. Therefore this study investigated the influence of covering materials on high strength concrete finishing spray-on materials of fiber composite spray mortar(FCSM). Both polypropylene(PP) and polyvinyl alcohol(PVA) fiber were used in this test. Test showed that concrete, covering 18mm mortar containing PVA fiber and confining metal lath 2.3mm thickness, decreased 50% of main bar ambient temperature. compared with control concrete. In addition, concrete covering 18mm mortar without fiber caused falling of covering materials and then it was exposed in elevating temperature. As a result, spatting of the concrete occurred same as control concrete. However, concrete covering spray-on mortar containing PVA or PP fiber resisted spatting occurrence.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.1
• /
• pp.1-6
• /
• 2014

In this paper, we propose a CPLD low power algorithm considering the structure. The proposed algorithm is implemented CPLD circuit FC(Feasible Cluster) for generating a problem occurs when the node being split to overcome the area and power consumption can reduce the algorithm. CPLD to configure and limitations of the LE is that the number of OR-terms. FC consists of an OR node is divided into mainly as a way to reduce the power consumption with the highest number of output nodes is divided into a top priority. The highest number of output nodes with the highest number of switching nodes become a cut-point. Division of the node is the number of OR-terms of the number of OR-terms LE is greater than adding the input and output of the inverter converts the AND. Reduce the level, power consumption and area. The proposed algorithm to MCNC logic circuits by applying a synthetic benchmark experimental results of 13% compared to the number of logical blocks decreased. 8% of the power consumption results in a reduced efficiency of the algorithm represented been demonstrated.