• Journal of electromagnetic engineering and science
• /
• 제15권2호
• /
• pp.120-122
• /
• 2015

This study presents a new, simple method for improving the front-to-back (F/B) ratio of a microstrip patch antenna (MSA) based on surface wave suppression. The back radiation of the MSA is significantly reduced by using the meandered ground plane edges and placing split-ring resonators (SRRs) in the middle of the meandered slots. By loading SRRs near the center of the meandered ground plane edges, some parts of the diffracted back-lobe power density can be reduced further. Compared to the F/B ratio of a conventional MSA with a full ground plane of the same size, an improved F/B ratio of 18 dB has been achieved experimentally for our proposed MSA.

• Journal of Magnetics
• /
• 제22권1호
• /
• pp.133-140
• /
• 2017

Split magnetic fluid sealing is a combination of magnetic fluid rotary and plane sealing. Using the theory of equivalent magnetic circuit design as basis, the author theorized the pressure resistance performance of magnetic fluid plane sealing. To determine the pressure resistance of magnetic fluid plane sealing, the author adopted the method of finite element analysis to calculate the magnetic field intensity in the gap between plane sealing structures. The author also analyzed the effect of different sealing gaps, as well as different ratios between the sealing gap and tooth and solt width, on the sealing performance of split magnetic fluid. Results showed that the wider the sealing gap, the lower the sealing performance. Tooth width strongly affects sealing performance; the sealing performance is best when the ratio between tooth width and sealing gap is 2, whereas the sealing performance is poor when the ratio is over 8. The sealing performance is best when the ratio between the solt width and sealing gap is 4, indicating a slight effect on sealing performance when the ratio between the solt width and sealing gap is higher. Theoretical analysis and simulation results provide reference for the performance evaluation of different sealing equipment and estimation of critical pressure at interface failure.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.340-343
• /
• 2002

Electromagnetic(EM) radiation problems and their possible solutions are addressed in this paper for the split power plane of high-speed digital systems. Stitching and decoupling capacitors are proved to be very effective fur reducing signal noise, ground bounce as well as electromagnetic radiation from the split power plane. Simulations based on 3D-Finite Difference Time Domain (FDTD) method are utilized for the analysis of practical high frequency multi-layered PC main board

• Journal of electromagnetic engineering and science
• /
• 제2권2호
• /
• pp.75-80
• /
• 2002

Signal integrity problems and their possible solutions are addressed in this paper for split power plane of high-speed digital systems. Stitching and decoupling capacitors are proved to be very effective for reducing signal noise, ground bounce as well as electromagnetic radiation from the split power plane. Simulations based on 3D-Finite Difference Time Domain (FDTD) method are utilized for the analysis of practical high frequency multi-layered PC main board.

• 대한전자공학회논문지SD
• /
• 제47권6호
• /
• pp.43-50
• /
• 2010

본 논문에서는 시스템 모듈에서 발생하는 EMI를 줄이기 위해 분할된 전원/접지 평판 구조에 의해 발생하는 방사성 방출(Radiated emission)을 분석하였다. 분석을 위해 다양한 조건을 갖는 시험 기판(Test board)에 대한 자기장과 전기장을 시뮬레이션하고 측정하여 비교하였다. 이 분석 결과는 입력 신호의 주파수 대역에서 반사계수의 위상이 $0^{\circ}$에 근접하도록 하며, 입력 신호의 주파수와 분할된 전원/접지 평판 구조의 공진주파수가 일치하지 않도록 분할된 접지 갭의 폭과 위치를 결정함으로써 방사성 방출을 줄일 수 있음을 보여준다. 또한, 스티칭 커패시터(Stitching capacitor)를 사용하여 방사성 방출을 저감시킬 수 있으며, 방사성 방출을 효과적으로 저감시키기 위해 입력 신호의 주파수에서 반사계수의 크기를 낮추고 위상이 $0^{\circ}$에 근접하도록 스티칭 커패시터의 값과 위치를 결정할 필요가 있음을 알 수 있다.

• 대한수학회지
• /
• 제44권6호
• /
• pp.1313-1327
• /
• 2007

We review the algebraic structure of $\mathbb{H}{\sharp}$ and show that $\mathbb{H}{\sharp}$ has a scalar product that allows as to identify it with semi Euclidean ${\mathbb{E}}^4_2$. We show that a pair q and p of unit split quaternions in $\mathbb{H}{\sharp}$ determines a rotation $R_{qp}:\mathbb{H}{\sharp}{\rightarrow}\mathbb{H}{\sharp}$. Moreover, we prove that $R_{qp}$ is a product of rotations in a pair of orthogonal planes in ${\mathbb{E}}^4_2$. To do that we call upon one tool from the theory of second ordinary differential equations.

• 한국게임학회 논문지
• /
• 제13권4호
• /
• pp.25-34
• /
• 2013

3D 게임에서 충돌 탐지를 효과적으로 하기 위해 구성하는 공간 분할 트리는 분할 평면을 결정하는데 트리 밸런스와 분할 평면과 겹치는 폴리곤의 개수 등을 고려해야 한다. 본 논문에서는 3D 게임 공간 분할 트리에서 트리 빌드 조건에 대한 가중치를 제어하는 휴리스틱 알고리즘을 제안하였다. 가중치의 변화에 따라서 트리 빌드 시간, 분할 평면과 겹치는 폴리곤을 쪼갤 때 시각적 불일치를 유발할 수 있는 T-junction 의 제거 시간, 트리 밸런스에 따른 렌더링 속도(frame per second) 등을 3D 게임 시뮬레이션을 통하여 분석하였다.

• Journal of electromagnetic engineering and science
• /
• 제12권4호
• /
• pp.247-253
• /
• 2012

This study presents a new, simple method for improving the front-to-back (F/B) ratio of a microstrip patch antenna. The back radiation of the microstrip patch antenna is reduced by removing some metallic parts around the ground plane and placing a new soft-surface configuration, consisting of an array of stand-up split-ring resonators on a bare dielectric substrate near the two ground plane edges. Compared to the F/B ratio of a conventional microstrip patch antenna with a full ground plane of the same size, our proposed microstrip patch antenna experimentally achieves an improved F/B ratio of 9.6 dB.

• Journal of electromagnetic engineering and science
• /
• 제4권4호
• /
• pp.150-155
• /
• 2004

Universal design equations are presented for the H-plane T-junction power divider with a circular conducting post in a rectangular waveguide. For a given operating frequency and power split ratio, the post offset from the T-junction center line, the distance between the post and the waveguide wall, and the post diameter can be adjusted to obtain a minimum reflection at the input waveguide. Optimum values of the post offset are given in terms of the normalized frequency and the power split ratio. Corresponding values of the post diameter and the distance of the post from the waveguide wall are given in terms of the normalized frequency and the post offset.

• Structural Engineering and Mechanics
• /
• 제58권2호
• /
• pp.243-257
• /
• 2016

The aim of this study is to investigate the seismic resistance of dry stone arches under in-plane seismic loading. For that purpose, several numerical analyses were performed using the combined finite-discrete element method (FDEM). Twelve types of arches with different ratios of a rise at the mid-span to the span, different thicknesses of stone blocks and different numbers of stone blocks in the arch were subjected to an incremental dynamic analysis based on excitation from three real horizontal and vertical ground motions. The minimum value of the failure peak ground acceleration that caused the collapse of the arch was adopted as a measure of the seismic resistance. In this study, the collapse mechanisms of each type of stone arch, as well as the influence of the geometry of stone blocks and stone arches on the seismic resistance of structures were observed. The conclusions obtained on the basis of the performed numerical analyses can be used as guidelines for the design of dry stone arches.