• 대한치과기공학회지
• /
• 제8권1호
• /
• pp.85-90
• /
• 1986

The effect of splinting on aqbutment tooth distal movement was performed in vitro study. An acrylic resin mandibular model with missing 2nd premolars, molars and a removable partial denture framework were constructed. The roots of the canines, 1st premolars and edentulous ridges were coated with silicone rubber. A modified Ney Surveyor was used for vertical load appkication, and abutment tooth distal movement were measured with a dial gauge with four conditions of splinting methods were tested by applying unilateral vertical loadings. The results are follows; 1. The magnitude of abutment tooth distal movement on the non-load side was less 40$\sim$69% than that occurred on the load side. 2. On the load side, reducing effect of splinting on abutment tooth movement in the condition of load side double abutment(30%), non-load side double abutment(10%), double abutments of both sides(40%) was compared with single abutments of both sides. 3. On the non-load side, reducing effect of splinting on abutment tooth movement in the condition of load side double abutment(5%), non-load side double abutment(22%), double abutments of both sides(59%) was compared with single abutments of both sides. 4. The magnitude of abutment tooth distal movement in the condition of double abutments of both sides was less 40$\sim$59% than that in the condition of single abutments of both sides.

• The Journal of Advanced Prosthodontics
• /
• 제3권4호
• /
• pp.177-185
• /
• 2011

PURPOSE. The aim of this study was to evaluate the effect of dimensional stability of splinting material on the accuracy of master casts. MATERIALS AND METHODS. A stainless steel metal model with 6 implants embedded was used as a master model. Implant level impressions were made after square impression copings were splinted using 5 different techniques as follows. (1) Splinted with autopolymerizing resin and sectioned, reconnected to compensate polymerization shrinkage before the impression procedure. (2) Splinted with autopolymerizing resin just before impression procedure. (3) Primary impression made with impression plaster and secondary impression were made over with polyether impression material. (4) Splinted with impression plaster. (5) Splinted with VPS bite registration material. From master model, 5 impressions and 5 experimental casts, total 25 casts were made for each of 5 splinting methods. The distortion values of each splinting methods were measured using coordinate measuring machine, capable of recordings in the x-, y-, z- axes. A one-way analysis of variance (ANOVA) at a confidence level of 95% was used to evaluate the data and Tukey's studentized range test was used to determine significant differences between the groups. RESULTS. Group 1 showed best accuracy followed by Group 3 & 4. Group 2 and 5 showed relatively larger distortion value than other groups. No significant difference was found between group 3, 4, 5 in x-axis, group 2, 3, 4 in y-axis and group 1, 3, 4, 5 in z-axis (P<.0001). CONCLUSION. Both Splinting impression copings with autopolymerizing resin following compensation of polymerization shrinkage and splinting method with impression plaster can enhance the accuracy of master cast and impression plaster can be used simple and effective splinting material for implant impression procedure.

• 대한치과교정학회지
• /
• 제27권5호
• /
• pp.825-837
• /
• 1997

실험적 치아이동 후 보정기간 동안 고정방법이 치주인대 섬유의 재배열에 미치는 영향을 알아보기 위하여, 체중 20kg 내외의 성견에서 상악 제 3절치와 견치 사이에 견인 스프링을 이용하여 120 gm의 교정력을 3주간 가한 후 좌측에는 유연성 고정장치로 0.0215 인치 multistrand wire를, 우측에는 견고성 고정장치로 폴리 에틸렌 리본을 레진 접착제로 각각 장착한 다음 4주, 8주, 또는 12주 후 희생시켜 치주조직의 변화를 방사선 사진, 광학 현미경 관찰을 통하여 분석한 바 다음과 같은 결과를 얻었다. 1. 치아이동 후 압박측에서는 치주인대 공간의 압축과 함께 치주인대섬유가 굵어진 소견을 보였으며 인장측의 치주인대섬유는 신장되어 보였다. 2. 보정 4주 후 유연성 고정군에서는 치주인대섬유의 재배열이 관찰되었으나 견고성 고정군에서는 관찰되지 않았다. 3. 보정 8주 후부터는 두 군 모두에서 치주인대섬유의 재배열 소견이 관찰되었으며, 두 군간 치주인대섬유의 재배열 차이는 보이지 않았다. 4. 보정기간 동안 치주인대섬유의 재배열은 압박측 보다 인장측에서 빠른 소견을 보였다. 이상의 결과는 치아이동 후 견고하게 고정한 보정방법에서도 치주인대섬유의 재배열이 일어남을 보여주었고, 치아 보정시 폴리에틸렌 리본으로 고정한 보정장치도 유용하게 사용될 수 있음을 시사하였다.

• 대한치과보철학회지
• /
• 제46권5호
• /
• pp.479-489
• /
• 2008

목적: 상악 구치부에서 자연치와 임플란트 보철시, 보철치관/고정체 비율에 따른 응력분포 양상을 비교하고자 했다. 재료 및 방법: 자연치 모델의 경우는 획득한 3차원 인체모델을 상악 좌측 제2소구치 및 제 1대구치가 포함된 상악골을 Box 형태의 3차원 유한요소모델로 변환하였고, 임플란트 모델은 3차원 인체모델에서 치아 부분을 제거하고 동일 부위에 임플란트 모델을 연결하는 과정을 거쳐서 임플란트가 삽입된 유한요소모델을 구성하였다. 치관/고정체 비율을 0.7:1, 1:1, 1.25:1이 되도록 골수준 (bone level)을 조정하였으며 각 모델의 치관 부위에 300 N의 수직 하중과 수평하중을 각각 가했다. 결과: 1. 모든 하중 조건하에서 자연치와 임플란트 모두에서 피질골과 인접하는 경부에 응력이 집중되는 양상을 보였다. 2. 치관/치근 (고정체) 비가 증가함에 따라 자연치와 임플란트 모두에서 교합면에 수직적 하중을 가한 경우에는 응력의 변화가 뚜렷하지 않았으나, 수평적 하중을 가한 경우에서는 응력이 증가하는 양상을 보였다. 3. 자연치의 경우에 치관/치근비가 증가함에 따라 splinting이 응력감소 효과를 보였고, 임플란트의 경우에는, 치관/고정체 비가 증가함에 따라 splinting이 수직 하중조건에 응력감소효과를 보였으나, 중심에서 벗어난 하중조건에는 최대응력이 오히려 증가하는 양상을 보였다. 4. 임플란트의 경우, 치관/고정체 비가 증가함에 따라 splinting이 수평하중조건 4에서 뚜렷한 응력감소 효과를 보이나, 수평 하중조건 5에서는 응력감소 효과가 감소되고, 특히 치관/고정체 비가 1.25:1인 경우에서는 오히려 응력의 증가를 보였다. 결론: 임플란트 보철물은 치관/고정체 비가 커질수록 더 큰 응력을 받게 되고, splinting의 효과도 감소하게 된다. 또한 교합하중이 임플란트의 장축을 벗어나거나 중심에서 벗어난 경우 응력이 커지는 것으로 사료된다.

• 대한치과보철학회:학술대회논문집
• /
• 대한치과보철학회 2001년도 추계학술대회
• /
• pp.68-68
• /
• 2001

• 대한치주과학회:학술대회논문집
• /
• 대한치주과학회 2000년도 제40회 종합학술대회 연제초록
• /
• pp.115-115
• /
• 2000

• 대한치주과학회:학술대회논문집
• /
• 대한치주과학회 2000년도 제40회 종합학술대회 연제초록
• /
• pp.127-129
• /
• 2000

• 대한치과보철학회지
• /
• 제55권4호
• /
• pp.389-393
• /
• 2017

목적: 본 연구의 목적은 탄성력이 높게 개발된 레진의 굽힘 강도를 평가하고, resin wire splint (RWS)와 유연성을 비교 평가하는 것이다. 재료 및 방법: 세가지 레진 G-aenial flo (GA, GC), Superbond (SB, Sun medical), G-fix (GF, GC)의 세 점 굽힘 강도는 ISO4049/2000에 따라 진행하였다. GA, SB, GF를 이용한 세개의 RS군과 GA와 교정용 016" SS wire를 이용한 RWS군간의 치아 동요도 비교는 영구치 모형을 이용하였다. 상악좌측중절치에 3도의 동요를 부여하고, 치아의 수평적인 동요도를 splint 전후에 각 3회씩 periotest vale로 평가하였다. Splint 전후 periotest value는 splinting 효과로 환산하여 평가하였다. 통계적인 평가는 one-way ANOVA와 turkey HDS test를 이용하였다(${\alpha}=.05$). 결과: SB와 GF가 GA에 비해 낮은 굴곡강도를 보였으나, 세가지 RS군은 RWS에 비해 높은 splinting 효과를 나타내었다 (P < .05). 결론: 제한된 본 연구에서 사용된 재료와 상관없이 RS는 RWS에 비해 높은 견고성을 보였으며, 이는 탈구치아 치료를 위한 flexible splint에 부적합한 것으로 보인다.

• 대한치과보철학회지
• /
• 제44권1호
• /
• pp.51-62
• /
• 2006

Purpose: The purpose of this study was to evaluate the pattern and the magnitude of stress distribution in the supporting tissues surrounding three different types of implants(ITI, 3i. and Bicon implant system) Material and method: Photoelastic models were made with PL-2 resin(Measurements Group, Raleigh, USA) and three implants of each kind were placed in the mandibular posterior edentulous area distal to the canine. For non-splinted restorations, individual crowns were fabricated on three titanium abutments. For splinted restorations, 3-unit axed partial dentures were fabricated. Photoelastic stress analyses were carried out to measure the fringe order around the implant supporting structure under simulated loaded conditions(15 lb. 30 lb). Conclusion: The results were as follows; 1 Regardless of the implant design, stresses were increased in the apex region of loaded implant when non-splinted restorations were loaded. While relatively even stress distribution occurred with splinted restorations. Splinting was effective in the second implant. 2. Strain around Bicon implant were lower than those of other implants, which confirmed the splinting effect. The higher the load, the more the stress occurred in supporting tissue, which was most obvious in the Bicon system. 3. Stress distribution in the supporting tissue was favorable in the ITI system. while the other side of 3i system tended to concentrate the stress in some parts.

• 대한치과보철학회지
• /
• 제44권5호
• /
• pp.561-573
• /
• 2006

Statement of the problem: In cases of low bone level in maxilla followed by extraction due to severe periodontitis or enlarged maxillary sinus, crown-root ratio of implant prosthesis will increase. The prognosis of these cases is not good as expected. Purpose : The purpose is to compare stress distribution due to crown-root ratio and effect of splinting between two implants in maxillary molar area under different loads Material and methods: Using ITI($4.1{\times}10$ mm) implant. two finite element models were made(model S: two parallel implants, model A: one of two is 20 degree inclined). Each model was designed in different crown-root ratio(0.7:1, 1:1, 1.25:1) and set cement type gold crown to make it splinted or non-splinted clinical situations. After that, 300 N force was loaded to each model in four ways.(load 1 : middle of occlusal table, load 2 : middle of buccal cusp, load 3 : middle of lingual cusp, load 4 : horizontal load to middle of buccal cusp), and stress distribution was analyzed. Results: On all occasions, stress was concentrated on neck of implant near cortical bone. In the case of inclined implant, stress was increased compared with parallel implants. Under load 1, 2, 3, stress was not increased even when crown-root ratio increases, but under load 4, when crown-root ratio increases, stress also increased. And more stress was concentrated under load 1 than load 2, 3. When crown-root ratio was same, stress under load 1, 2, 3 decreased when splinting, but under load 4, stress did not really decrease. Conclusion: Under vertical load, stress distribution related to crown-root ratio did not change. But under horizontal load, stress increased as crown-root ratio increases. Under vertical load, splinting decreased stress but under horizontal load, effect of splinting was decreased as condition of implant changes for the worse such as increase of crown-root ratio, inclined implant.