• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.987-990
• /
• 2003

This paper presents a cross-coupled RF VCO with high-Q MEMS-based spiral inductors. Since the use of high-Q inductors is critical to VCO design, MEMS-based spiral inductors with the Q-factor of nearly 22 are used for the RF VCO with an active cascode current source. The RF VCO circuits including spiral inductors have been designed and simulated in GaAs MMIC-MEMS process. The simulation results of the VCO circuits showed the phase noise of -180dBc/Hz at an offset frequency of 500KHz. The RF VCO circuit simulatinon used 2mA DC current and 3.3V supply.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.7
• /
• pp.77-80
• /
• 2008

In this paper, low phase noise VCO using novel compact microstrip spiral resonator is proposed. A spiral resonator has super compact dimension, low insertion losses in the passband and high level of rejection in the stopband with sharp cutoff and a large coupling coefficient value, which makes a high Q value, and has reduced the phase noise. To increase the tuning range of VCO, varactor diode has been connected at the tunable negative resistance in VCO. This VCO has presented the oscillation frequency of $5.686{\sim}5.841GHz$, harmonics -29.83 dBc and phase noise of $-115.16{\sim}-115.17dBc/Hz$ at the offset frequency of 100 KHz.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.11
• /
• pp.56-60
• /
• 2009

In this paper, a novel voltage controlled oscillator (VCO) has been presented by using the microstrip square multiple spiral resonator for reducing the phase noise of VCO. The microstrip multiple square resonator has the large coupling coefficient value, which makes a high Q value, and has reduced phase noise of VCO. The VCO with 1.8 V power supply has phase noise of -115.0~-117.34 dBc/Hz @100 kHz in the tuning range, 8.935~9.4 GHz. When it has been compared with microstrip square multiple spiral resonator and coventional spiral resonator, the reduced Q value has been -32.7 dB and -57.6 dB respectively. This low phase noise VCO could ve available to a VCO in X-band.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.283-286
• /
• 1999

A 2㎓, low noise, low power CMOS voltage-controlled oscillator (VCO) with an integrated LC resonator is presented. The design of VCO relies heavily on the on-chip spiral inductor. An optimized spiral inductor with Q-factor of nearly 8 is achieved and used for the VCO. The simulated result of phase noise is as low as -l14 ㏈c/Hz at an offset frequency of a 600KHz from a 2㎓ carrier frequency. The VCO is tuned with standard available junction capacitors, resulting in an about 400MHz tuning range (20%). Implemented in a five-metal 0.25${\mu}{\textrm}{m}$ standard CMOS process, the VCO consumes only 2㎽ from a single 2.5V supply. It occupies an active area of 620${\mu}{\textrm}{m}$$\times$720${\mu}{\textrm}{m}$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.9
• /
• pp.961-966
• /
• 2009

In this paper, a novel voltage-controlled oscillator(VCO) using the metamaterial broadside coupled spiral resonators(BC-DSRs) is presented for reducing the phase noise. For reducing of the phase noise, the series spiral structures have been applied for the signal plane and ground plane at each in order to have the large coupling. Compared with the conventional VCO, the proposed VCO has the larger coupling coefficient constant, which makes a higher Q-factor and has reduced the phase noise of the VCO. The proposed VCO has the phase noise of $-121{\sim}-117.16\;dBc$/Hz at 100 kHz in the tuning range, $5.749{\sim}5.853\;GHz$. The figure of merit(FOM) of this VCO is $-198.45{\sim}-194.77\;dBc$/Hz at 100 Hz in the same tuning range, respectively.

• Journal of Industrial Technology
• /
• v.29 no.B
• /
• pp.101-105
• /
• 2009

A 1.571GHz LC VCO with optimized spiral inductor for GPS receiver is designed in 130nm CMOS process. The phase noise of the VCO has been reduced the use of high Q inductor and on chip filter. It has phase noise of -91dBc/Hz, -111dBc/Hz, and -131dBc/Hz at 10kHz, 100kHz, and 1MHz offset frequencies from the carrier, respectively. This VCO consumes 2mA from a 0.6V supply.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.5 s.120
• /
• pp.539-546
• /
• 2007

In this paper, a 3-D EM simulation methodology for on-chip spiral inductor analysis has provided and it is shown that the methodology can be adapted to the highly predictable design for CMOS VCO. LC-resonator type VCO have fabricated by using standard 0.25 um CMOS process. And the LC VCO layout case which has pattern ground shielded inductors and the other layout case which has no pattern grounded inductors were fabricated for the verification of their effects on the VCO's phase noise by reducing the Q-factor of inductors. Fabricated VCO has 3.094 GHz, -12.15 dBm output at the tuning voltage of 2.5 V, and from the simulation, Q-factor of the pattern grounded inductor has increased 8% at 3 GHz, and from the measurement results, the phase noise has reduced by 9 dB at the 3 MHz off-set frequency for the pattern grounded inductor layout case.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.6
• /
• pp.627-634
• /
• 2010

In this paper, a novel voltage-controlled oscillator(VCO) using the complimentary bifilar archimedean spiral resonator(CBASR) is presented for reducing the phase noise characteristic. A CBASR has compact dimension, a sharp skirt characteristic in stopband, a low insertion loss in passband, and a large coupling coefficient value, which makes a high Q value and improve the phase noise of VCO. The proposed VCO has the oscillation frequency of 2.396~2.502 GHz in the tuning voltage of 0~5 V, the output power of 7.5 dBm and phase noise of -119.16~-120.2 dBc/㎐ at the offset frequency of 100 kHz in tuning range.

• Journal of the Semiconductor & Display Technology
• /
• v.2 no.1
• /
• pp.11-14
• /
• 2003

The high Q(quality factor) suspended spiral inductors were fabricated on the silicon substrate by 3D surface micromachined process. The integration of 2.4GHz VCO has been performed by fabricating suspended spiral inductor of the top of CMOS VCO circuit. The phase noise of VCO integrated MEMS inductor is 93.5 dBc/Hz at 100kHz of offset frequency.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.5
• /
• pp.8-15
• /
• 2002

We optimally designed the VCO(voltage-controlled oscillator) with spiral inductor using the MOSIS HP 0.5${\mu}{\textrm}{m}$ CMOS process. With the developed SPICE model of spiral inductor, the quality factor of spiral inductor was maximized at the operating frequency by varying the layout parameters, e.g., metal width, number of turns, radius, space of the metal lines. For the operation frequency of 2㎓, the inductance of about 3nH, and the MOSIS HP 0.5 CMOS process with the metal thickness of 0.8${\mu}{\textrm}{m}$, oxide thickness of 3${\mu}{\textrm}{m}$, the optimal width of metal lines is about 20${\mu}{\textrm}{m}$ for the maximum Quality factor. With the optimized spiral inductor, the VCO with LC tuning tank was designed, fabricated and measured. The measurements were peformed on-wafer using the HP8593E spectrum analyzer. The oscillation frequency was about 1.610Hz, the frequency variation of 250MHz(15%) with control voltage of 0V - 2V, and the phase noise of -108.4㏈c(@600KHz) from output spectrum.