• 복식
• /
• 제5권
• /
• pp.65-81
• /
• 1981

I referred to documents to study the origin and the progressing process of textiles. Cotton seeds were first imported from China by Mun, Ik Jem at the end of the era of Koryeo, and cotton had several different names such as mok-myen, cho-myen, gil-pae, baek-chep-za, tap-po, ban-ki-wha, dong-yep-po and so on. Since the era of the Three Kingdoms, people had heard of cloth of superior quality but it was not certain whether it was imported from China or made in our country. It seems that cotton was not made during that period, white silk, hemp cloth, and ramie fabric were produced. At that time, linen was called cotton by mistake. After importing cotton seeds from China, all the people began to plant them and made their clothes from them. At the beginning of the Yi Dynasty, the weaving technique was dependent on China. However, the government persuaded farmers to plant them. At that time cotton was used as a means of purchasing instead of money. Silkworms raising started during the era of the Three Kingdoms and it was widely spread at the beginning of the Yi Dynasty. In order to encourage sericulture' spinning and weaving instruments were installed in the royal palace and the queen with sher court maids demonstrated how to spin and weave. The activity was named "chin-jam-ye." Linen was the representative of all textiles and it was also very popular. The technique of weaving had already been highly developed at the era of Silla. During the era of the Three Kingdoms people used "bang-chu-cha" as a weaving instrument. They discovered several new hand machines in the period of the Yi Dynasty: they were instrument of removing seeds, spinning wheel, hemp cloth loom and so on, and we find the remains of them these days.

• 수산해양기술연구
• /
• 제43권4호
• /
• pp.281-290
• /
• 2007

This study was aimed not only to develop the gill net and trap made of biodegradable monofilaments in order to prevent a ghost fishing and to protect marine ecosystem, but also to analyze their spinning process and physical properties. Results showed that the spinning speed of biodegradable polybutylene succinate(PBS) monofilament was estimated to be approximately 100m/min when spinning temperature and cooling water temperature were adjusted at $180^{\circ}C$ and $3^{\circ}C$, respectively. The breaking loads of PBS monofilaments were estimated to be $35.3kg/mm^2$ at ${\phi}0.2mm$, $46.5kg/mm^2$ at ${\phi}0.3mm$, and $49.7kg/mm^2$ at ${\phi}0.4mm$ in the dry condition, respectively. However, its breaking loads in the wet condition were reduced by 2.4-5.5%, compared to those in the dry condition. The knotted strength of PBS monofilament at ${\phi}0.2mm$ was estimated to be 98.6% of PE in the dry condition. The breaking load of PBS monofilament at ${\phi}0.3mm$ was evaluated to be 81.8% of PA, and its softness showed 3 times less than that of PA in the wet condition. The breaking load of PBS monofilament at ${\phi}0.4mm$ was 95.3% of PA, and its softness showed 1.6 times less than that of PA in the wet state. However, the load elastic elongations of two kinds of monofilaments were estimated to be 1% higher than that of PA.

• 한국세라믹학회지
• /
• 제32권2호
• /
• pp.197-208
• /
• 1995

${\gamma}$-LiAlO2 fibers for fiber reinforced molten carbonate fuel cell (MCFC) matrix have been produced from LiAlO2 complex polymeric sols using the sol-gel process. The stable and spinnable LiAlO2 sols could be synthesized by mixing LiNO3 alcohol solutions in aluminum complex polymeric sols prepared through the condensationpolymerization reaction of 1 more of aluminum tri-sec-butoxide with 0.55 mole of mixed chelates (mole ratio of acetylaceton/triethanolamine=0.25/0.3). It was found that the viscosity range for fiber-spinning should be higher than 30 poise. The defect-free flexible ${\gamma}$-LiAlO2 fibers with the average tensile strength of 350 MPa could be obtained when the spinned fibers were heat-treated to 120$0^{\circ}C$ on the specified heating schedule after dried at room temperature.

• 유변학
• /
• 제1권1호
• /
• pp.71-79
• /
• 1989

임계연신비로 특징지어지는 비등온 방사공정에서의 Draw Resonance 발생을, White 의 변형속도에 따라 변하는 물질의 이완시간 모델에 의한 convected Maxwell 유체의 방사 모형을 사용해서 연구했다. 임계연신비의 계산에는 다른 연구자들이 이용하는 통상의 복잡 한 수치계산인 eigenvalue 방법을 쓰지 않고 전파하는 동적 waves 에 근거한 간단한 Hyun 의 이론을 사용했다. 그 결과 Staton Number와 냉각 공기온도로서 나타내지는 방사공정의 냉각이 공정을 안정시킨다는 것이 밝혀졌다. 다시 말해서 연신점도가 변형후화인 유체이거 나 변형박화인 유체이거난 상관없이 항상 Stanton Number가 켜지거나 또는 냉각공기온도 가 낮아질수록(즉냉각효과가 커질 때) 임계연신비가 커지는 것이다(단변형박화 dvcp의 빌부 구간을 제외하고) 한편 Draw Resonacnce 에 미치는 냉각의 효과는 무차원 이완시간(a Weissenberg Number 혹은 a Deborah number)이 커질수록 작아진다는 것도 발견됐다. 이 것은 process Time 이 작아지면 열전달이 작아지기 때문이다. 이러한 내용들은 다른 연구 자들의 결과와도 잘 부합된다.

• 한국정밀공학회지
• /
• 제24권12호
• /
• pp.128-135
• /
• 2007

Micro-channels for a wave micropump have been fabricated using the Stereolithography and UV Photolithography. The micro-channel with a channel height of $500\;{\mu}m$ was fabricated with stereolithography. UV photolithography was used for producing micro-channels with a channel length less than $100\;{\mu}m$. The fabrication process data including spinning rpm, pre-bake and post-bake time, and develop time for single layer and multiple layer 3D micro-structures using SU-8 photo resist are experimentally found. A film mask printed with a 40,000 dpi laser printer was used for UV lithography and micro-structures in the order of tens of micrometers in dimension were successfully fabricated.

• 한국자기공명학회논문지
• /
• 제9권1호
• /
• pp.67-73
• /
• 2005

$^{27}AI$ triple quantum magic angle spinning (3QMAS) NMR spectra of several mordenite (MOR) sample were simulated with the point charge model method and compared with experimental 3QMAS spectra. Signal positions from different tetrahedral (T) sites in 3QMAS spectra are mainly governed by local structures of T sites such as T-O-T angles and T-O bond lengths. When preparation methods, cations in addition to Si/Al rations vary, the local structures of T sites in MOR change enough to alter signal patterns in 3QMAS of MOR. This inhibits to study the of Al distribution variation over 4 different T sites in mordenite during process such as dealumination by 3QMAS spectra.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.209-209
• /
• 2006

Ultra-fine fibers are spun by expensive fiber spinning technology using special spinnerets. Ultra-fine fibrous materials have attracted considerable attentions because of their potential applications as high performance wiping cloths, water absorbent sound proofing materials and moisture transfer sporting good. However, production expense of ultra-fine fibers is 5 to 7 times higher than general textile materials. The objective of this research is to develop cost-effective recycling process to produce multi-functional ultra-fine fibrous material in terms of the development of garnetting and carding machines for ultra-fine fibrous material waste and scrap. The efficiency of sound absorption for the recycled polyester nonwoven increased with decreasing length and thickness of component fibers, which was attributed to the reduction of air permeability. It is expected that high value and cost-effective textile products are developed using ultra-fine fibrous wastes and that sound proofing material and oil absorbent f

• 한국군사과학기술학회지
• /
• 제13권2호
• /
• pp.304-312
• /
• 2010

The function of IRCM(Infrared Countermeasures) jamming is to cause the missile to miss its intended target by disturbing the seeker tracking process. This paper analyzes the jamming effect of IRCM jamming for a stationary reticle seeker. The phase error containing the azimuth angle information of target is analyzed for the intensity, frequency and duty ratio variation of the jammer pulse signal. We confirmed that the more the jammer frequency is similar to the spinning frequency of the stationary seeker, the more jamming effect is high.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1432-1435
• /
• 2006

We report on carbon nano-fibers (CNFs) for applying to epoxy as a highly thermal conductive adhesive. In order to fabricate CNFs, electro-spinning process was performed with polyacrylonitrile (PAN) solutions. The sample was stabilized at the annealing temperature of $360^{\circ}C$, and carbonized from 900 to $1100^{\circ}C$. It is shown that the synthesized CNFs have a good thermal conductivity of several hundred W/m K. LED backlight units (BLUs) fabricated with MPCB using CNF-mixed epoxy give a better heat dissipation and higher performance than normal LED BLUs. On the basis of SEM, XRD, and FTIR, the characteristics of CNFs are described.

• 한국세라믹학회지
• /
• 제32권1호
• /
• pp.17-24
• /
• 1995

The TEA complex polymeric sol was prepared by the alkoxide sol-gel method. The purpsoe of this experiment was to vefity the particle shape in the sol from the investigation of the rheological properties. TEA retarded hydrolysis rate by the reaction with alkoxide enough to make a stable transparent sol in the wide range of composition. From the results of the viscosity change with time, the optimum mole ratio for spinning was selected as 0.5 mole of TEA, 3 mole of H2O and the optimum viscosity was 104 cPs. The rheological behavior of the sol showed that the particle shape in the sol was linear, which was adequate for fiber drawing.