• Journal of Korean Neurosurgical Society
• /
• v.60 no.5
• /
• pp.560-566
• /
• 2017

Objectvie : The global sagittal postural patterns as characterized by Roussouly classification have been previously described in various ethnicities, there were no studies investigated in Koreans. To analyze the distribution of the global sagittal postural patterns in Korean adults using Roussouly classification, the author prospectively studied. Methods : 252 asymptomatic Korean adults was recruited. Data was obtained by reviewing the films for each subject. Spinopelvic parameters were measured and sagittal postural patterns were then determined according to Roussouly classification. We compared the data across different ethnicities from our study and a previous study to further characterize Korean sagittal postures. Results : The subject included 151 males and 101 females, with mean age of $33.2{\pm}8.2years$. The average descriptive results were as below : thoracic kyphosis $28.6{\pm}7.7^{\circ}$, lumbar lordosis $48.3{\pm}10.2^{\circ}$, sacral slope $37.8{\pm}5.8^{\circ}$, pelvic incidence $45.1{\pm}7.5^{\circ}$, pelvic tilt $9.4{\pm}6.7^{\circ}$, spinosacral angle $130.1{\pm}5.4^{\circ}$, and sagittal vertical axis $16.25{\pm}22.5mm$. 125 subjects among 252 (49.6%) belonged to Roussouly type 3 (namely neutral). There were also 58 (23%), 33 (13.1%), and 36 (14.3) subjects in type 1, 2, and 4 (namely non-neutral), respectively. Conclusion : Enrolling 252 asymptomatic Korean adults, this prospective study found that 49.6% of asymptomatic Korean adults possessed a sagittal posture of Roussouly type 3. All radiologic parameters follows general concept of spinal sagittal balance pattern. Overall, this study might be a basis for further investigation of spinal sagittal balance.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.4
• /
• pp.227-235
• /
• 2019

The purpose of this study was to investigate the effects of cervical vertebral height and shoulder stabilization on anterior head posture in people with turtle neck. The subjects of this study consisted of normal and healthy people with 30 turtle necks. Subjects were randomly assigned to shoulder stabilization exercise and cervical vertebrae exercise (30 men, 15 men and 15 women, height: $168.67{\pm}6.51$, $22.33{\pm}8.27$, $65.03{\pm}11.98$, and $28.66{\pm}1.91$), In the experimental group, shoulder stabilization exercise and cervical spine exercise were performed for 4 weeks. Deep neck flexor, leavator scapular, upper trapezius, rhomboid, and lower trapezius showed significant differences in shoulder stabilization and cervical vertebrae before and after the experiment. As a result, the CVA value decreased significantly and the muscle activity value increased significantly when exercise and Mckenzie program were applied. These results show that exercise and Mckenzie programs have a positive effect on turtle neck improvement.

• Journal of The Korean Society of Integrative Medicine
• /
• v.7 no.2
• /
• pp.189-195
• /
• 2019

Purpose : The purpose of this study was to investigate the effects of chin tuck exercise (CTE) on the craniovertebral angle (CVA), strength and endurance of deep cervical flexor (DCF) muscles in subjects with forward head posture(FHP). This study was performed on 30 subjects with FHP. Method : Thirty subjects were divided into two groups; modified CTE (n=15), conventional CTE (n=15). Both of the group performed the exercise 4 times a week for 6 weeks. The subjects performed CTE in two different methods; modified CTE, with device designed that help keep cervical lordois curve, and coventional CTE, without using device. The CVA was measured using Image software version. A pressure biofeedback unit was used to measure the strength and endurance of the DCF muscles. The data was analyzed by the paired t-test for comparing before and after changes of variables in each group and the independent t-test for comparing the between groups. Result : There was statistically significant difference of before and after strength and endurance of DCF muscles in modified CTE (p<0.05). There was statistically significant difference of before and after only endurance of DCF muscles in conventional CTE (p<0.05). There was statistically significant difference of between the two group in strength of DCF muscles (p<0.05). Conclusion : Muscle strength to stabilize the spine plays an important role in maintaining a good posture. Therefore, we suggest that the application of CTE with a device designed to maintain the lordotic curvature in the neck is likely to yield better outcomes in FHP subjects in future studies.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.369-372
• /
• 2021

These days, people spend more time sitting at a desk for studies or work. Also, because people continue to use computers, smartphones, and tablet PCs often during break times, their posture is getting worse. Maintaining a position of bad posture for an extended period of time causes problems with the musculoskeletal system related to the neck, shoulders, and spine. Additionally, problems such as physical fatigue and posture deformation are predicted to expand to a wide range of age groups. Therefore, the core function of the system we are developing is to ensure correct sitting posture and to receive alert notifications via the created mobile application. To create the system, a flex sensor, pressure sensor, and tilt sensor are attached to a chair and utilized. The flex sensor detects and compares the amount of bending in the chair's posture and transmits this value to an Arduino Uno R3 board. Additionally, information such as body balance and incline angle are collected to determine whether or not the current sitting posture is correct. When the posture is incorrect, a notification is sent through the mobile application to indicate to the user and the monitoring app that their posture is not correct. The system proposed in this study is expected to be of great help in future posture-related research.

• Journal of the Institute of Convergence Signal Processing
• /
• v.24 no.1
• /
• pp.15-20
• /
• 2023

In general, maintaining an incorrect sitting posture for a long time is widely known to adversely affect the spine. Recently, several researchers have been interested in the causal relationship between incorrect sitting posture and spinal diseases, and have been studying methods to precisely measure changes in sitting or standing posture to prevent spinal diseases. In previous studies, we have developed a sensor device capable of measuring real-time posture change, applied a momentum calculation algorithm to improve the accuracy of real-time posture change measurement, and verified the accuracy of the postural change measurement sensor. In this study, we developed a posture measurement and analysis device that considers changes in the center of body pressure through the developed sitting pressure measurement, and it confirmed the sensor as an auxiliary tool to increase the accuracy of posture correction training with improving the user's visual feedback.

• Journal of the Korean Orthopaedic Association
• /
• v.55 no.6
• /
• pp.520-526
• /
• 2020

Purpose: The need for revision fusion surgery after spinal fusion has increased. A revision rod that connects to the previous rod was newly developed for revision surgery. The purpose of this study was to analyze the clinical and radiological results after spinal fusion revision surgery using revision rods. Materials and Methods: Twenty-one patients who underwent revision fusion surgery after spinal fusion in two university hospitals with minimum 1 year follow-up were reviewed. This study assessed 16 cases of adjacent-segment disease, four cases of thoracolumbar fracture, and one case of ossification of ligament flavum. The Oswestry Disability Index (ODI) and numerical rating scale (NRS) were evaluated as clinical outcomes, and the union rate, lordosis or kyphosis of the revision level, lumbar lordosis, T5-12 kyphosis, and proximal junctional kyphosis angle were evaluated as the radiological outcomes. Results: The average ODI was 54.6±12.5 before surgery and improved to 29.8±16.5 at the final follow-up. The NRS for back pain and leg pain was 5.0±1.7 and 6.4±2.0 before surgery, which changed to 2.9±1.6 and 2.9±2.2 at the final follow-up. Lumbar lordosis was 18.1°±11.9° before surgery and 21.1°±10.3° at the final follow-up. Proximal junctional kyphosis was 10.8°±10.1° before surgery, and 9.2°±10.5° at the final follow-up. These angles were not changed significantly after surgery. Bony union was successful in all cases except for one case who underwent posterolateral fusion. Conclusion: Revision surgery using a newly developed revision rod on the thoracolumbar spine achieved good clinical outcomes with successful bony union. No problems with the newly developed revision rod were encountered.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.6 no.1
• /
• pp.15-26
• /
• 2000

Purpose : This study was done to examine the actual effect of the scapular position in these flexibility tests. The purpose of this study was to examine the differences between the measurement of SRT(Sit-and-Reach Test) without intentional abduction of the scapular (pre-test) and with intentional abduction of the scapular (post-test). The hypothesis is: 1. There is no differences in the SRT result of the pre-test and the post-test. 2. There is no differences in the HJA(Hip Joint Angle) result of the pre-test and the post-test. 3. There is no differences in the Spine Motion Test(SMT) result of the pre-test and the post-test. Method : The total 60 people (30 men, 30 women) were participated in this study. In the pre-test, the subjects were asked to sit on the examination table and try the SRT motion; and then the HJA, SRT and the SMT numerical values were taken. In the post-test. the subjects were instructed to intentionally bring the scapula outward from the midline; and the HJA, SRT and the SMT numerical values were taken. Result : In the pre-test. the SRT result averaged 34.17cm. and in the post-test. the SRT result averaged 36.68cm. The difference was about 2.81cm which showed a significant mean statistically (p<0.01). The measurement increased by 8.22%. The HJA was $85.9^{\circ}$ in pre-test, and it was $85.5^{\circ}$ in post-test. giving the $0.4^{\circ}$ differences. Therefore, it didn't have a statistical mean (p>0.05). The SMT value was 69.56cm in the pre-test. and it was 69.28cm in the post-test, about 0.28cm decreased. Therefore, it didn't have a statistical mean (p>0.05). SRT values and HJA values were correlated (p<0.01). SMT values and SRT values (p<0.01), and SMT values and HJA values(p<0.05) were each in counter correlation. Conclusion : The result of the SRT without intentional scapular abduction (34.17cm) and with intentional scapular abduction (36.68cm) showed a significant increase about 8.22% (p<0.01). In SRT, the effect of the intentional scapular abduction on SMT showed no significant means, the pretest value being 69.56cm and the post-test value being 69.28cm (p>0.05).

• Journal of Korean Neurosurgical Society
• /
• v.30 no.8
• /
• pp.998-1003
• /
• 2001

Objective : The maintenance of the correction of kyphotic deformity is one of the difficult problem in tuberculous spondylitis after anterior debriment and fusion with tricortical bone graft. The goal of this study is to find out the efficacy of titanium mesh cage impacted with autogenous bone chip in tuberculous spondylitis treated with anterior intervertebral fusion. Materials and Method : Twelve patients were treated with anterior intervertebral fusion using titanium mesh cage for tuberculous spondylitis from January 1996 to June 1999. We analized the changes in the correction of kyphotic deformity, changes of ESR and CRP, fusion state and recurrence after anterior intervertebral fusion with titanium mesh cage. Results : Clinical symptoms were improved in all twelve patients without any neurologic complications. The mean kyphotic angle corrected was 7.3 degrees immediately after operation, but the loss of correction of kyphotic angle was 2.2 degrees after 3 months and 2.6 degrees after 6 months. We found that the loss of correction of kyphotic deformity occurred mainly within the first 3 months after surgery. Only one patient, suffered from acute hepatic failure after first operation and had an insufficient anti-tuberculous medication therapy, showed recurrence of tuberculous spondylitis after 6 months. The patient underwent a second operation with posterior fixation procedure with good outcome. The changes of ESR and CRP were not specifically important factor to reveal recurrence of tuberculosis of the spine in our series. Conclusion : The surgical procedure of tuberculous spondylitis using titanium mesh cage with bone chip seems to be an effective procedure to minimize loss of the correction of kyphotic deformity without any aggravating inflammatory change and recurrence with titanium mesh cage, when sufficient debridement and anti-tuberculous chemotherapy are achieved.

• Archives of Plastic Surgery
• /
• v.33 no.6
• /
• pp.681-687
• /
• 2006

Purpose: The nose of most Koreans is characterized as a low nasal dorsum, retracted columella, and an acute columella-labial angle. For the surgical correction of the tip and columella, a modified septal extension graft, along with augmentation rhinoplasty has been developed. Methods: With this technique, a septal extension graft is fixed on the entire caudal margin of the septum (the cephalic-caudal axis) and at the same time, it is placed above the anterior nasal spine, in the membranous portion of the septum and at the base of the columella(the anterior-posterior axis). The present report describes the results obtained in 13 patients and offers an analysis of the results as judged by the columella-labial angle and 4 proportional indices(nose height index, nasal bridge length index, nasal tip projection index, columella length index), measured by photogrammetry. Results: The postoperative values obtained in these 5 categories increased significantly compared to the preoperative ones, thus confirming that the projection of tip was augmented, the nose was lengthened, and the columella was advanced caudally and lengthened. Moreover, these positive outcomes were still maintained during the follow-up period, and no side effects, such as saddle nose deformity, were reported. Conclusion: A modified septal extension graft can be considered as an effective method for the surgical correction of the nasal tip and columella in Koreans.

• Journal of Korean Neurosurgical Society
• /
• v.56 no.1
• /
• pp.5-10
• /
• 2014

Objective : When the pedicle screw insertion technique is failed or not applicable, C7 intralaminar screw insertion method has been used as an alternative or salvage fixation method recently. However, profound understanding of anatomy is required for safe application of the bilaterally crossing laminar screw at C7 in clinic. In this cadaveric study, we evaluated the anatomic feasibility of the bilateral crossing intralaminar screw insertion and especially focused on determination of proper screw entry point. Methods : The C7 vertebrae from 18 adult specimens were studied. Morphometric measurements of the mid-laminar height, the minimum laminar thickness, the maximal screw length, and spino-laminar angle were performed and cross-sectioned vertically at the screw entry point (spino-laminar junction). The sectioned surface was equally divided into 3 parts and maximal thickness and surface area of the parts were measured. All measurements were obtained bilaterally. Results : The mean mid-laminar height was 13.7 mm, mean minimal laminar thickness was 6.6 mm, mean maximal screw length was 24.6 mm, and mean spinolaminar angle was $50.8{\pm}4.7^{\circ}$. Based on the measured laminar thickness, the feasibility of 3.5 mm diameter intralaminar screw application was 83.3% (30 sides laminae out of total 36) when assuming a tolerance of 1 mm on each side. Cross-sectional measurement results showed that the mean maximal thickness of upper, middle, and lower thirds was 5.0 mm, 7.5 mm, and 7.3 mm, respectively, and mean surface area for each part was $21.2mm^2$, $46.8mm^2$, and $34.7mm^2$, respectively. Fourteen (38.9%) sides of laminae would be feasible for 3.5 mm intralaminar screw insertion when upper thirds of C7 spino-laminar junction is the screw entry point. In case of middle and lower thirds of C7 spino-laminar junction, 32 (88.9%) and 28 (77.8%) sides of laminae were feasible for 3.5 mm screw insertion, respectively. Conclusion : The vertical cross-sectioned area of middle thirds at C7 spinolaminar junction was the largest area and 3.5 mm screw can be accommodated with 77.8 % of feasibility when lower thirds were the screw entry point. Thus, selection of middle and lower thirds for each side of screw entry point in spino-laminar junction would be the safest way to place bilateral crossing laminar screw within the entire lamina. This anatomic study result will help surgeons to place the screw safely and accurately.