• Proceedings of the Korean Magnestics Society Conference
• /
• 2008.12a
• /
• pp.306.1-306.1
• /
• 2008

• Journal of the Korean Magnetics Society
• /
• v.4 no.1
• /
• pp.1-6
• /
• 1994

The magnetization dynamics was investigated by solving possible origins of overdamped susceptibility observed in ultra-soft magnetic amorphous thin films. The experimental high frequency spectrum and computational spectrum calculated from Gilbert's equation of motion were compared in order to find proper damping factor $\alpha{\approx}20$ and demagnetizing coefficients $D_{x}{\approx}D_{y}{\approx}D_{z}{\approx}0$ for ultra-soft magnetic films. A magnetization vortex mode was, then, proposed to explain the origin of the reversible susceptibility and other anomalies of the ultra-soft magnetic heterogeneous thin films. In this mode it is suggested that there occur, within the nanoscale structural features of the ultra-soft films, incoherent rotational spin motions that are highly damped by the energy transfer from short wavelength spin wave modes and local defect structure mode interactions.

• Journal of Auto-vehicle Safety Association
• /
• v.5 no.1
• /
• pp.16-24
• /
• 2013

Some GM (General Motors) vehicles are using a GMLAN (General Motors Local Area Network) communication protocol for control and diagnostics. The airbag control module uses vehicle speed information from the GMLAN to record the vehicle speed as pre-crash information. In order to use the vehicle speed information for crash reconstruction purposes, it helps to be able to understand the accuracy of the data. The actual vehicle speed is not expected to be the same as the GMLAN indicated speed in some situations like a spin or if there is hard braking. This paper compares the actual vehicle speed and vehicle speed information during specific vehicle maneuvers. Actual vehicle speed is calculated from a GPS sensor, while GMLAN vehicle speed is calculated from transmission output sensor by the Engine control module (ECM). Vehicle maneuvers defined as Mode #1, Mode #2, Mode #3. The Mode #1 maneuver simulates wheel lock-up and skidding f by hard-braking at a specific speed. The Mode #2 maneuver simulates a 90degree turn using a J-turn maneuver at a specific speed. The Mode#3 maneuver simulates a 180 degree turn using a spin type of maneuver at a specific speed. The study then compares the GMLAN speed and GPS speed to see what speed difference exists between them. The results of this paper are applicable to GM vehicles only. This paper catalogs the performance and limitations of two vehicles as useful reference for crash reconstructions where there is a need to understand the speed indicated in the pre-crash section of the SDM data.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.2
• /
• pp.325-329
• /
• 2002

In this study, the dependency of the behavior of propagating front on the reaction condition in frontal polymerization reaction has been studied. We have used some multifunctional acrylates as a monomer and ammonium persulfate as an initiator for the polymerization reactions. In frontal polymerization, a method of producing polymeric materials via a thermal front that propagates through the unreacted monomer/initiator solution, the behavior of self propagating front shows various dynamic patterns depending on the reaction condition. We have obtained some spin modes of propagating front in the number of 'hot spots' or 'spin heads' by changing the reaction condition. The effect of the reactor tube diameter on the mode of propagating front has also been studied by using some reactor tubes with different size of tube diameter and it has been examined in some detail by adopting an experimental method of two-tubes system.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.45.2-45.2
• /
• 2019

The main-belt asteroid (5247) Krylov is known as a Non-Principal Axis (NPA) rotator. However, the shape model and spin state of this asteroid were not revealed. The physical model of an asteroid including spin state and shape is regarded to be important to understand its physical properties and dynamical evolution. Thus, in order to reconstruct the physical model of Kryolv, we applied the light curve inversion method using not only the optical light curves observed with ground-based telescopes in three apparitions during 2006, 2016, and 2017, but also the infrared light curves obtained with the Wide-field Infrared Survey Explorer (WISE) in 2010. We found that it is rotating in Short Axis Mode (SAM) with the rotation and precession periods of 368.71 hr and 67.277 hr, respectively. The orientation of the angular momentum vector is (298°, -58°) in the ecliptic coordinate system. The ratio of moments of inertia of the longest axis to the shortest axis is I_a/I_c = 0.36; the ratio of moments of inertia of the intermediate axis to the shortest axis is I_b/I_c = 0.96. Finally, the excitation level of this asteroid is found to be rather low with a ratio of the rotational kinetic energy to the basic spin state energy as E/E₀ ≃ 1.024. We will briefly discuss the possible evolutionary process of Krylov in this presentation.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.50.1-50.1
• /
• 2017

The Non-Principal Axis (NPA) rotators can be clues to spin evolutionary processes of asteroids because their excited spin states evolve due to either internal or external forces. The NPA rotation of (5247) Krylov was confirmed by Lee et al. (2017) based on KMTNet photometric observations during the 2016 apparition. We conducted follow-up observations in 2017 apparition using the 0.6-2.1m telescopes in the northern hemisphere to determine the spin state and shape model of this asteroid. We found that it is rotating in the Short Axis Mode (SAM) based on the determined rotation period ($P_{\psi}=374.6hr$) and precession period ($P_{\phi}=67.48hr$). The greatest and intermediate principal inertia moments are nearly the same as $I_b/I_c=0.94$, but the smallest principal inertia moments are nearly half that of the others, $I_a/I_c=0.43$. This ratio of principal inertia moments suggests that dynamically equivalent shape of this asteroid is close to that of a prolate ellipsoid. In this presentation, we will provide the physical model of (5247) Krylov to discuss its possible spin evolutionary processes that acted on its spin.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.5
• /
• pp.863-869
• /
• 2008

In this paper, a system with sensor network security mechanism which can be applied to home network structure is designed and it is implemented on a virtual network of a home network middleware. The basic structure of home networking middleware supports one-to-one (unicast) or broadcast communication mode between the lookup server and service nodes on the network. Confidentiality and authentication are key security factors of the one-to-one communication and user authentication is crucial for broadcasting mode. One of the sensor network's security techniques SPINS consists of SNEP and ${\mu}TESLA$. The SNEP ensures confidentiality and authentication, and ${\mu}TESLA$ provides broadcast authentication. We propose a SPIN based home network middleware and it is implemented by using the CBC-MAC for MAC generation, the counter mode (CTR) for message freshness, the pseudo random function (PRF) and RC5 as encryption algorithm. The implementation result shows that an attacker cannot decrypt the message though he gets the secure key because of CTR mode. In addition, we confirmed that a received message of the server is authenticated using MAC.

• Korean Journal of Food Science and Technology
• /
• v.34 no.6
• /
• pp.1140-1144
• /
• 2002

Molecular relaxation behaviors of crystalline glucose anhydrous, crystalline glucose monohydrate, and amorphous glucose with different particle sizes were observed by measuring spin-spin relaxation time constant $(T_2)$ at the temperature range of $-20\;to\;110^{\circ}C$ using temperature-controlled low field nuclear magnetic resonance spectroscopy. No change in $T_2$ values of crystalline glucose anhydrous was observed throughout the temperature range, whereas $T_2$ values of crystalline glucose monohydrate and amorphous glucose increased from around $45\;and\;65^{\circ}C$, respectively. These results indicate that molecular mobility of crystalline glucose anhydrous does not change even at temperature higher than $100^{\circ}C$ and that the stability of powdered glucose could be improved by increasing the particle size of materials.

• Journal of Magnetics
• /
• v.15 no.2
• /
• pp.61-63
• /
• 2010

We used $^1H$ nuclear magnetic resonance (NMR) to study the phase transitions and molecular dynamics in a characteristic ferroelectric liquid crystal with a carbon number n = 7, S-2-methylbutyl 4-n-heptyloxybiphenyl-4'-carboxylate (C7). The results were compared with those of our recent work on S-2-methylbutyl 4-n-octanoyloxybiphenyl-4'-carboxylate (C8), with a carbon number n = 8. While the recrystallization and isotropic phase transitions exhibited a first-order nature in the $^1H$ NMR spin-lattice and spin-spin relaxation measurements, a second-order nature was shown at the Sm-A - Sm-$C^*$ liquid crystalline phase transition. A soft-mode anomaly arising from the tilt angle amplitude fluctuation of the director, of which only a hint had been noticed in the C8 system, was manifested in the C7 system at this transition.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.12
• /
• pp.1106-1110
• /
• 2005

We fabricated (110) silicon hard master by using anisotropic wet etching for embossing. The etching chemical for the silicon wafer was a TMAH $25\%$ solution. The anisotropic wet etching produces a smooth sidewall surface and the surface roughness of the fabricated master is about 3 nm. After spin coating an organic-inorganic sol-gel hybrid material on a silicon substrate, we employed hot embossing technique operated at a low pressure and temperature to form patterns on the silicon substrate by using the fabricated master. We successfully fabricated the multi-mode planar optical waveguides showing low propagation loss of 0.4 dB/cm. The surface roughness of embossed patterns was uniform for more than 10 times of the embossing processes with a single hydrophobic surface treatment of the silicon hard master.