• Journal of the Korean Ceramic Society
• /
• v.28 no.11
• /
• pp.843-850
• /
• 1991

There is a growing demend for absorptive electromagentic shielding materials for wide band frequency application. In this study, the absorber which consists of a rubber plus Ni-Zn ferrite which have been prepared by direct-wet method. A rubber ferrite composite for electromagnetic shielding, it is most importan facter the homogeneous ultra fine size and high dispersitive ferrite powder. Direct-wet method and solid-solid reaction method for preparing of ultra fine ferrite powder was used. It has been experimentally verified that the powder which prepared by direct-wet method was very fine and almost same size spherical powder, the composite ferrite have excellent electromagnetic wave absorption in X-band.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.4
• /
• pp.56-62
• /
• 1994

Far-zone electric fields radiated by a coaxial cable through an aperture in a perfectly conducting ground plane are calculated utilizing the dyadic Green's function and vector wave functions. In this paper the outer radius $\alpha$ is assumed to be less than 0.02 so that the aperture fields is well approximated by the dominant TEM mode in the coaxial cable. The result of present approach is compared with the readily obtained solution. The present solution is valid outside of the spherical regions with radius `$\alpha$' from the center of coaxial cable.

• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.160-161
• /
• 2005

Using a Shack-Hartmann sensor, we construct an optical testing system measuring the wavefront error of small optical components. The systematic error of the sensor is compensated with a reference plane-wave system that produces almost perfect plane waves. Several types of lenses are tested using a point source that generates spherical waves emitted from a pinhole. The results of the optical testing obtained with the Shack- Hartman sensor are compared with those measured with Zygo interferometer.

• Nuclear Engineering and Technology
• /
• v.34 no.6
• /
• pp.533-544
• /
• 2002

The neutron induced nuclear data for Mo-95, Tc-99, Ru-101 and Rh-103 was calculated and evaluated in the fast energy region. The energy dependent optical model potential parameters were extracted based on the recent experimental data and applied up to 20 MeV. The s-wave strength function was calculated from the parameters. Spherical optical model, statistical model in equilibrium energy, multistep direct and multistep compound model in pre-equilibrium energy and direct capture model were used in the calculation. The theoretically calculated cross sections were compared with the experimental data and the evaluated files The model- calculated total and capture cross sections were in good agreement with the reference experimental data. The direct capture contribution improved the capture cross sections in pre- equilibrium region. The evaluated cross section results were compiled to ENDF-6 format and will improve the ENDF/B-Vl.

• Korean Journal of Optics and Photonics
• /
• v.6 no.4
• /
• pp.274-281
• /
• 1995

The new method of recording and reconstructing a synthetic object, which was called as scannedobject holography (SOH), was proposed and its feasibility was demonstrated theoretically and experimentally. The hologram was recorded by interfering the fixed reference beam with spherical waves emitting from a moving point source, whose trajectory determined the shape of the synthetic object to be recorded. The end face of an optical fiber and the output from a pulsed laser were utilized in order to implement a moving point source experimentally. tally.

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.02a
• /
• pp.197-198
• /
• 2008

본 논문에서는 Iterative Fourier Transform Algorithm $Method(IFTA)^{(1)}$를 사용하여 Diffractive Optical Element(DOE)를 통과한 빛의 Shape이 Input Beam의 각 조건에 따라 얼마나 원하는 형태에 가까워지는지를 Input 대비 Output의 Efficiency와 Signal to Noise Ratio(SNR) Simulation 을 통해 알아보았다. Input beam의 종류는 Gaussian, Supergaussian, Plane, Spherical, Quadratic wave 으로 하고 각각의 경우에 대해 Beam Diameter, Polarization, Wavelength를 변화시키며 DOE에서의 회절 현상을 simulation하였다. 이때 Polarization은 Linear, Circular, Elliptical 형태로 변화시켰고 Wavelength는 332.8nm에서 832.8nm까지의 범위에 대해 연구하였다. 또한 relative edge가 있을 때와 없을 때를 비교하여 가장 효율이 높은 Input Beam의 형태와 그 parameter에 대해 연구하였다.

• Geomechanics and Engineering
• /
• v.21 no.1
• /
• pp.1-9
• /
• 2020

In this article, an analytical solution for the effect of the rotation on thermo-viscoelastic non-homogeneous medium with a spherical cavity subjected to periodic loading is studied. The distribution of displacements, temperature, redial stress, and hoop stress in non-homogeneous medium, in the context of generalized thermo-viscoelasticity using the GL theory, is discussed and obtained. The results are displayed graphically to illustrate the effect of the rotation. Comparisons with the previous work in the absence of rotation and viscosity are made.

• Journal of electromagnetic engineering and science
• /
• v.15 no.1
• /
• pp.44-52
• /
• 2015

A worst-case estimate of an envelope correlation coefficient (ECC) is obtained for small multiple-input multiple-output (MIMO) mobile antennas operating below 1 GHz. The worst-case estimate is numerically derived in this paper using spherical and exponential wave functions. The derived result confirms that the worst-case ECC can be easily obtained from the rotation angle between the radiation patterns of two MIMO elements, which are attained directly from the amplitude of 2D electric field patterns without any additional phase and polarization information. As a practical example, MIMO mobile antennas with different antenna element arrangements are compared to verify the validity of the proposed worst-case estimate. Moreover, based on these analyses, we also suggest an effective approach to reduce the ECC of a small MIMO mobile antenna operating below 1 GHz by properly locating the antenna elements to make the radiation patterns perpendicular to each other.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.2
• /
• pp.126-129
• /
• 1995

Linear and nonlinear optical properties of CuCl nanocrystals in silica glass have been studied using low temperature absorption, degenerate four wave mixing (DFWM), and time-resolved photoluminescence spectroscopy. Assuming a spherical shape, effective radius of the CuCl quantum dots was estimated to be 2.5 nm, which is obtained from low temperature absorption data. The DFWM experiment was performed in 380-386 nm wavelength region, and the diffracted signal was measured as a function of wavelength with 1.0 nm interval. Time-resolved photoluminescence measurement was also carried out at 77 K to obtain the time response of CuCl nanocrystals. The experimental results on the large third order nonlinear optical of CuCl quantum dots are explained in terms of crystal size and oscillator strength of quantum spheres.

• Nuclear Engineering and Technology
• /
• v.34 no.4
• /
• pp.370-381
• /
• 2002

The neutron induced nuclear data for Pr-141, Nd-143, Nd-145, Sm-147 and Sm-149 were calculated and evaluated from 10 keV to 20 MeV. The energy dependent optical model potential parameters were extracted based on the recent experimental data and applied up to 20 MeV. The s-wave strength function was calculated. Spherical optical model , statistical model in equilibrium energy, multistep direct and multistep compound model in pre-equilibrium energy and direct capture model were introduced in Empire calculation. The theoretically calculated cross sections were compared with the experimental data and the evaluated files. The model calculated total and capture cross sections were in good agreement with the reference experimental data. The capture cross sections in pre-equilibrium were enhanced in recent released Empire version. The evaluated cross section results were compiled to ENDF-6 format and will improve the ENDF/B-Vl.