• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.393-398
• /
• 2004

From the research which it sees the noise of the high-speed railroad use nation it gave and the vehicle sound arresting tile masturbation which is a sound arresting unit standard it slept and in an environment noise standard side from it classified. The case foreign nation vehicle of the KTX vehicle where vehicle sound arresting from the side the high speed railroad use nations from the open ground with 64-68 dBA are used first of all from domestic and it compares and the efficiency almost is a possibility of knowing the beginning of history box from the interior sound arresting side. Also it will be developed from domestic and to case of the position KHST vehicle the speed 50 km/h is more speed up the KTX vehicle than in spite of the standard which is equal will pay with 350 km/h and it will be having and the possibility the strong point is knowing very from the interior sound arresting side it was. For railroad area along resident at the comfort improvement of the second the environment noise standard which it presents from the nation of most the patronage standard inland conforms in the law standard and the case high speed railroad of the place comparing domestic which is presented is not in spite of still prepared 2004 April commerce is operated standard easily not to be, it appeared with the fact that the speed governing one standard establishment by law is necessary.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.6
• /
• pp.2378-2387
• /
• 2017

Violinists learn to make better sounds by hearing and evaluating their own playing though numerous practice. This study proposes a new method of auditory feedback, which mimics this violinists' step and verifies its efficiency using experiments. Making the desired sound quality of a violin is difficult without auditory feedback even though an expert violinist plays. An algorithm for controlling a robot arm of violin playing robot is determined based on correlations with bowing speed, bowing force, and sound point that determine the sound quality of a violin. The bowing speed is estimated by the control command of the robot arm, where the bowing force and the sound point are recognized by using a two-axis load cell and a photo interrupter, respectively. To improve the sound quality of a violin playing robot, the sounds information is obtained by auditory feedback system applied Short Time Fourier Transform (STFT) to the sounds from a violin. This study suggests Gaussian-Harmonic-Quality (GHQ) uses sounds' clarity, accuracy, and harmonic structure in order to decide sound quality, objectively. Through the experiments, the auditory feedback system improved the performance quality by the robot accordingly, changing the bowing speed, bowing force, and sound point and determining the quality of robot sounds by GHQ sound quality evaluation system.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1026-1032
• /
• 2010

In this paper, To estimate the train exterior noise and environment noise which are occur when High-Speed EMU is driving with the speed of 370km/h, Estimated sound source about noise that is appeared during operation based upon noise SPL values. Based on aero-dynamic noise source and wheel-rail noise source, these were already used to the existed research, we have estimated each sound power about measured noise, and computed the sound source to apply on the High-Speed EMU, and also calculated the sound power in case of the maximum operation speed of 370km/h.

• Journal of Industrial Technology
• /
• v.20 no.B
• /
• pp.9-14
• /
• 2000

Sound insulation performance is investigated on the corrugated panel used for a rail way vehicle. Random incidence sound transmission loss is calculated by using the equivalent orthotropic plate model. Analysis results on several kinds of corrugated panels are in good agreement with the measured data. The analysis method is applied to predict the sound transmission loss of the corrugated panel used for Korean high speed train.

• Journal of the Korea Convergence Society
• /
• v.6 no.5
• /
• pp.233-240
• /
• 2015

In this paper, we present an algorithm that estimates the speed of a moving object only using its sound information. In general, the speed gun projects the incident light onto a moving object and measures the frequency variation of the scattered light. Then the speed is measured by this frequency difference. In our study, instead of light information, we measure the speed by sound frequency difference when the object is coming and moving away. In our experiments on the speed measurement, on average the error of 6.08% was obtained. Utilizing this algorithm for smart device, we can measure the speed of a moving object without sensor that measures the frequency of the light.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.1601-1602
• /
• 2013

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.818-821
• /
• 2005

The sound measurement procedures of IEC 61400-11 are applied to field test and evaluation of noise emission from 1.5 MW wind turbine generator (WTG) at Yongdang and 660 kW WTG at Hangwon in Jeju Island. Apparent sound power level, wind speed dependence and third-octave band levels are evaluated for both of WTGs. 1.5 MW WTG at Yongdang is found to emit lower sound power than 660 kW one at Hangwon, which seems to be due to lower rotating speed of the rotor of WTG at Yongdang. Equivalent continuous sound pressure levels (ECSPL) of 660 kW WTG at Hangwon vary more widely with wind speed than those of 1.5 MW WTG at Yongdang. The reason for this is believed to be the fixed blade rotating speed of WTG at Yongdang. One-third octave band analysis of the measured data show that the band components around 400-500 Hz are dominant for 1.5 MW WTG at Yongdang and those around 1K Hz are dominant for 660 kW WTG at Hangwon.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.1
• /
• pp.33-39
• /
• 2008

Void fraction of air bubble in the seagrass bed by photosynthesis was estimated with sound speed dispersion. A field experiment was conducted at Seagrasss bed of which bottom type is sandy mud and 120 kHz CW waveform was transmitted to obtain backscattered signals from seagrass bed. The differences of the arrival time of received signal from seagrass bed were observed between day and night. The diurnal variation of arrival time was caused by sound speed dispersion of air bubble generated by photosynthesis of seagrass.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.11a
• /
• pp.579-582
• /
• 2005

The sound measurement techniques in IEC 61400-11 are applied to field test and evaluation of noise emission from 1.5 MW wind turbine generator (WTG) at Yongdang-Lee and 650 kW WTG at Hangwon-Lee in Jeju Island. Apparent sound power level, wind speed dependence and third-octave band levels are evaluated for both of WTGs. 1.5 MW WTG at Yongdang is found to emit lower sound power than 660 kW one at Hangwon, which seems to be due to lower rotating speed of the rotor of WTG at Yongdang. Equivalent continuous sound pressure level s (ECSPL) of 650 kW WTG at Hangwon vary more widely with speed than those of 1.5 MW WTG at Yongdang. The reason for this is believed to be the fixed blade-rotating speed of WTG at Yongdang. One-third octave band analysis of the measured data show that the band components around 400-500 Hz are dominant for 1.5 MW WTG at Yongdang and those around 1K Hz are dominant for 660 kW WTG at Hangwon.

• Proceedings of the KSR Conference
• /
• 1998.05a
• /
• pp.249-256
• /
• 1998

Design target values of transmission loss in a high-speed train wall are suggested by calculating the difference between interior and exterior noise levels of it. Exterior noise level distribution on the boundary of train wall is calculated by Sysnoise, with sound source input prepared by experiments. Two kinds of exterior sound sources are considered, the rolling noise of train wheels on the rail and the aerodynamic noise from the pantograph. Interior noise level is provided by high-speed design target. Transmission loss characteristics according to the frequency band are examined.