• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(II)
• /
• pp.948-953
• /
• 2002

As the delay of the Kyungbu High Speed Railroad, HST should use conventional line through Daegoo to Pusan until the new railroad build. High speed railroad noise is one of the main causes of environmental impact. Whenever HST on conventional railroad line is planned or a housing project near an existing railroad is proposed, an estimate of the relevant noise levels is usually required. For this, it is necessary to quantify those parameters that affect the railroad noise. This paper deals with an estimation of high speed railroad noise on conventional line.

• 전기학회논문지P
• /
• 제52권4호
• /
• pp.154-160
• /
• 2003

This paper is proposed a ANN-based rotor position and speed estimation method for IPMSM by measuring the currents. Because the proposed estimator treats the estimated motor speed as the weights, it is possible to estimate motor speed to adapt back propagation algorithm with 2 layered neural network. The proposed control algorithm is applied to IPMSM drive system. The operating characteristics controlled by neural networks are examined in detail.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.9-11
• /
• 1998

Most of sensorless algorithms are based on motor equations including electrical and mechanical parameters. However, parameter variation and uncertain error decrease the accuracy of speed estimation of PMSM. This paper investigates the sensorless speed control of PMSM considering parameter variation. The proposed algorithm use the speed compensator which is robust in parameter variation and error. The simulation and experimental results indicate good performances.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.660-662
• /
• 2004

This paper proposes an Intelligent Speed Estimator in order to realize the speed-sensorless vector control of an induction motor. Intelligent Speed Estimator used Model Reference Adaptive System which has Fuzzy-Neural adaptive mechanism as Speed Estimation method. The Intelligent Speed Estimator estimates the speed of an induction motor with a rotor flux of a reference model and adjustable model in MRAS. The Intelligent Speed Estimator reduces the error of the rotor flux between the voltage flux model and the current flux model using the error and the change of error as input of the Estimator. The computer simulation is executed to verify the propriety and the effectiveness of the proposed speed estimator.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 정기총회 및 추계학술대회 논문집 학회본부
• /
• pp.100-102
• /
• 1993

This paper proposes a control method of induction machine at a low speed range. When an encoder is used for speed detection, we usually obtain speed information from the increased pulse number. At low speed range, however, we can get only average speed between encoder pulses and it makes speed controller unstable. By using a disturbance observer and torque current, it is possible to estimate accurate speed information. The simulation and experiment show that the stable speed control is performed at a low speed with proposed algorithm.

• 한국항해항만학회지
• /
• 제28권3호
• /
• pp.227-232
• /
• 2004

차량동역학제어시스템은 복잡하고 비선형이므로 잠금방지 제동시스템 및 자동주행시스템 개발에 어려움이 있다. 차량절대속도를 추정하기 위해 퍼지 로직 기법이 최근 적용되어 정상적인 조건에서 만족할 만한 결과를 얻고 있다. 그러나 급격한 제동시 추정오차가 크게 발생되었다. 본 논문에서는 휠 속도 센서를 이용하여 무인 컨테이너 운송차량의 절대속도를 추정하기 위해, 뉴럴 네트워크 모델의 방사대칭 기저함수와 주성분 분석법을 적용하여 10개의 추정 알고리즘중 오차를 4％ 이내로 추정할 수 있는 알고리즘을 제시하였다.

• 전기전자학회논문지
• /
• 제1권1호
• /
• pp.64-72
• /
• 1997

일반적으로 유도 진동기의 속도는 엔코더를 사용하여 측정되며, 측정된 평균 속도는 필연적인 시간 지연과 시스템 노이즈 등을 포함하고, 저속 운전시에는 운전 성능을 감소시킬 뿐 아니라 시스템 안정성에도 문제를 일으킨다. 또한 인버터의 데드 타임 효과, 스위칭 소자의 순전압 강하등의 영향으로 발생하는 부정확한 인버터 출력 전압은 토크 리플을 발생시키고 이는 저속 영역에서 더욱 크게 나타난다. 따라서 유도 전동기의 저속 영역에서의 운전 성능을 향상시키기 위하여는 위의 두가지 문제점을 해결하여야 한다. 본 논문에서는 칼만 필터를 이용한 유도 전동기의 정확한 순시 속도 추정과, 데드 타임 및 스위칭 소자의 순전압 강하 보상을 통한 인버터 출력 특성의 개선 방법을 제안하고, 유도 전동기의 극저속 운전 성능을 개선하였다.

• 한국철도학회논문집
• /
• 제20권5호
• /
• pp.577-587
• /
• 2017

철도차량이 고속화될수록 동적특성 설계에 있어 주행안정성 해석, 시험 및 평가 기법의 중요성이 커지고 있다. 특히 철도차량이 실제 선로에서 임계속도에 도달하면 헌팅에 의한 윤축의 과도한 진동으로 탈선 등의 중대 사고가 발생할 가능성이 높아 거의 대부분의 임계속도 시험 및 평가는 해석으로 대체하거나 주행시험대 같은 특수한 장비를 이용하여 수행되고 있다. 본 논문에서는 철도차량의 임계속도를 시험하고 평가하는 방법을 고찰하고 그 유용성을 실제 주행시험대 시험을 통해 확인하였다. 시험결과로부터 UIC 518에서 제시한 대차 가속도를 이용한 안전성 및 불안정 평가는 임계속도와 상관관계가 낮아 임계속도를 추정하는데 직접적으로 활용되기 어려우며, 등가감쇠비의 변화를 이용한 추정방법이 더 유효한 것으로 분석되었다.

• 신재생에너지
• /
• 제17권4호
• /
• pp.1-8
• /
• 2021

To determine the wind turbine class in the offshore of the Korean Peninsula, the reference wind speed for a 50-y return period at the hub height of a wind turbine was estimated using the reanalysis data sets. The most recent reanalysis data, ERA5, showed the highest correlation coefficient (R) of 0.82 with the wind speed measured by the Southwest offshore meteorological tower. However, most of the reanaysis data sets except CFSR underestimated the annual maximum wind speed. The gust factor of converting the 1 h-average into the 10 min-average wind speed was 1.03, which is the same as the WMO reference, using several meteorological towers and lidar measurements. Because the period, frequency, and path of typhoons invading the Korean Peninsula has been changing owing to the climate effect, significant differences occurred in the estimation of the extreme wind speed. Depending on the past data period and length, the extreme wind speed differed by more than 30% and the extreme wind speed decreased as the data period became longer. Finally, a reference wind speed map around the Korean Peninsula was drawn using the data of the last 10 years at the general hub-height of 100 m above the sea level.

• 플랜트 저널
• /
• 제8권1호
• /
• pp.50-59
• /
• 2012

The current dual-watchdog estimation system has individually calculated the construction, the engineering and the procurement cost. The dual-watchdog estimation system is inefficient and prolonged estimation period because of the lack of the interoperability and the difference of material unit cost and construction unit cost. In order to resolve this problem, new estimation software was developed. The estimation software is developed by making up for the weak points in existing estimation method. The cost data with the same standard is the key point. And this software enhanced accuracy and speed of the data search in stylized estimation standard. A summary of the construction, the engineering and the procurement cost was generated in this estimation software. The unit rate about the labor cost, equipment and expense through a sheet was handled. The developed estimation software has five categories on engineering cost, procurement cost, construction cost and subcontractor management sheet. In this study, the estimation software to supplement the faults of the existing estimation method was developed. And estimation software on petrochemical projects increases an efficiency of the estimation work.