• 한국산업융합학회 논문집
• /
• 제25권3호
• /
• pp.433-441
• /
• 2022

In general, in an emergency generator system for an electric facility including an induction motor load, an emergency power generation facility larger than the facility load capacity is built due to the initial starting current of the induction motor. In order to reduce this economic burden, various methods to reduce the inrush current of induction motors are applied to suppress the additional expansion of generators due to the reduction of power generation facilities and the increase in electrical facilities. Among these methods, when a system with a built-in soft start function of an induction motor using an inverter is built, it is the best way to reduce the inrush current of the induction motor to less than the rated current. However, in this case, the installation cost of the inverter to drive the induction motor increases. This paper proposes a soft start method of an induction motor by expanding the frequency and voltage control operation area of an emergency generator. In addition, proposed a speed calculation method based on power factor information, which is essential information for stable soft start of an induction motor, and a method for generating a speed command value of the governor for starting with maximum torque.

• 한국도로학회논문집
• /
• 제15권2호
• /
• pp.159-167
• /
• 2013

PURPOSES : In this study, the effects of when median exclusive bus lanes were applied to Daejeon trunk road (Wolpyeng crossway~Seodaejeon crossway, 6.3km) and (Daeduck Bridge 4~Kyeryong 4, 2.6km) by Microscopic Simulation VISSIM (5.0) was studied. The median exclusive bus lanes are one of the measures of transportation system manage techniques that can especially improve the efficiency of public transportation facilities. METHODS : According to the analysis of VISSIM on the Gyerong mainroad and Daedeok mainroad, when the median exclusive bus lanes were applied unlike when the roadside bus-only lanes were applied, the average travel speed of vehicles decreased but the average delay time and travel time increased. This arised from the changes in the geometric structure of the road which occurred the reduction of vehicle lane in the center of the road. RESULTS : In the case of bus, on the other hand, the average travel speed increased but the average delay time and travel time decreased. This is because the problems such as illegal parking and stopping, secondary road in out vehicle, and conflict of intersection right turn that roadside bus-only lanes occurred was solved. CONCLUSIONS : Although the introduction of median exclusive bus lanes will have a negative effect on general traffic flow due to the aggravation of travel, decrease of passenger car usage will lead to decrease of traffic volume. Therefore, smooth vehicle travel is expected.

• 한국도로학회논문집
• /
• 제15권2호
• /
• pp.149-157
• /
• 2013

PURPOSES : This study is to analysis for benefit and construction cost in underpass for small vehicles. METHODS : The study was performed using the traffic software VISSIM 5.20 for analysis on a variety of traffic conditions and analysed of benefits of changes through analysis of travel speed and travel time after modeling of existing underpass and small vehicle underpass. RESULTS : Results of this study, the benefits will be reduced by the introduction underpass for small vehicles were analyzed because heavy vehicles use the intersection above the underpass. However, it was required economic analysis considering both the benefits reduction and the construction costs reduction because it has the effect of reducing the construction cost. Showed that the difference in benefit changes depending on the v/c and heavy vehicles ratio and construction cost was difference by types of underpass. As a result of performing economic analysis with total benefits and construction cost, it was analyzed to be economical in underpass over a certain size. CONCLUSIONS : The result of this study are expected to be able to contribute to reviewing for feasibility due to the small vehicles underpass introduction and economic analysis. The study is case study to the underpass in Daegu. Therefore, the future requires the calculation of benefits reflect a wider range of traffic conditions and the economic analysis to construction cost calculation for various types of grad separation facilities.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.80-97
• /
• 2010

인천공항철도는 인천공항철도의 허브화 전략에 따라 당시 경쟁공항(간사이, 첵랩콕 등) 수준의 접근성 확보를 위해 건설을 추진하였으며, 현재 1단계(인천공항~김포공항, 40.3km)는 '07.3월 개통하여 운영중이며, 2단계(김포공항~서울역, 20.7km)는 '10.10월말에 개통예정으로 있으나, 인천공항철도가 서울역에서만 이용이 가능하도록 계획되어 있어 접근성이 불리하고, 운행속도가 최대 110km/h 수준으로 공항버스 등과 비교할 때 시간경쟁력이 부족하며, 현재 운행 중인 고속철도와 서울역에서 추가적으로 환승하여야 하는 등의 이유로 현재 1단계 운영구간의 공항철도 이용수요가 저조(7%)하며, 수요에 대한 재예측 결과 또한 협약대비 수요가 부족한 것으로 분석되어 국가가 부담하여야할 보조금이 연평균 4천억원 수준에 달하여, 국가에서는 한국철도공사가 민간지분을 매입 보조금 규모를 축소하는 대책을 마련하였음에도 불구하고, 상당한 규모의 보조금지급(연평균 2천억원)이 불가피한 실정에 있어 수요증대를 위한 인천공항철도 활성화 방안이 절실하다. 따라서, 본 고에서는 현재 KTX의 직결운행, 인천공항철도 운행열차의 고속열차(EMU 180 km/h급)대체를 통한 Speed UP을 통한 수요창출을 위한 시설계획 및 운영계획 등을 제언하여, 국가의 관문인 인천공항을 이용하는 승객들에게 신속하고 편리한 운행수단을 제공하고, 아울러 수요창출을 통한 국가보조금의 축소에도 기여할 것으로 기대된다.

• 문화기술의 융합
• /
• 제9권4호
• /
• pp.549-555
• /
• 2023

공용중인 고속철도의 PSC Box 교량의 긴장력 관리는 교량 성능에 있어 매우 중요한 기능으로 교량 유지관리시 세밀한 관리가 필요하다. 이에 본 연구에서는 열차(활하중) 재하시험 없이 측정한 상시처짐 결과를 이용하여 PSC Box girder 내부의 긴장력 감소 수준과 긴장력 손실에 다른 재긴장 예측 시기를 연구하고자 한다. PSC Box 거더의 긴장력 감소에 따른 재긴장 시기 예측결과, 준공 이후 약 17년 이전에서는 긴장력 감소(Jacking force loss) 곡선이 완만한 것으로 나나낫다. 그러나 17년 이후에서는 긴장력 감소 곡선이 급격하게 변화되는 것으로 나타났다. 따라서 공용연수 증가에 따라 긴장력이 감소하는 것으로 확인되었고, 구조물의 노후화가 진행될수록 긴장재의 손신을 더 급격하게 증가되는 것으로 분석되었다. 향후 공용중인 PSC Box 교량중에서 준공 이후 18년 이상 경과된 구조물의 경우 긴장재 및 주변 손상에 대한 정밀조사가 필요할 것으로 판단된다.

• 한국습지학회지
• /
• 제22권2호
• /
• pp.145-152
• /
• 2020

고속도로는 많은 자동차 운행대수와 함께 높은 주행속도 및 급격한 주행속도 변화구간(휴게소, 영업소 등)으로 인하여 비점오염물질의 배출이 높은 지역에 해당한다. 국내 고속도로는 절토층 및 성토층에 조성됨으로써 적정 토양침투량 확보가 어려워 다양한 종류의 비점오염저감시설이 설치되지 못하고 있다. 본 연구는 토양치환 기법에 대한 연구를 통해 고속도로에 설치 가능한 시설의 종류를 확대하고 비용효율적 침투시설의 설계를 유도하기 위하여 수행되었다. 침투율이 낮은 원지반에 토양치환을 수행할 경우 시설 내 체류시간이 약 30% 지연되고, 시설 내 침투 및 저류율은 약 20% 증대하며, 비점오염물질 Total Suspend Soiled (TSS), Chemical Oxygen Demand (COD), Biological Oxygen Demand(BOD), Total Nitrogen(TN) 및 Total Phosphorus(TP) 제거효율이 약 20% 증가하는 것으로 나타났다. 원지반 내 침투율이 낮은 곳에 토양치환을 수행할 경우 저류량, 체류시간 및 침투면적이 증가하여 침투율이 향상되는 것으로 나타났다. 원지반 토양의 침투능이 낮은 토양에 침투시설을 적용하기 위해서는 물환경보전법 시행규칙 별표17(비점오염저감시설의 설치기준)의 개선이 필요하며, 이 경우 토양 침투율이 시간당 13 mm 이하일 때 토양치환을 통해 법적 처리용량을 확보하도록 요구할 수 있다.

• 한국소음진동공학회논문집
• /
• 제24권9호
• /
• pp.682-686
• /
• 2014

Nowadays, the needs to revise the classification criteria for noise emission facilities have been suggested by the related industries. Because there existed many reasonable factors in the criteria regarding the noise emission facilities. And the noise emission facility classification criterion of the print machine changed from 50 HP to 100 HP in 2013. But the increasement of the noise emission facility classification criterion of the print machine can cause adverse effects like the bigger noise. So, in this paper, we measured the print machine's sound power level according to the changes of the print machine's power to assess the adverse effects. The measurement method applied with KS I ISO 9614-2(1996). The corelation between the sound power level and the power of print machines was analyzed by regression analysis. In this paper, we found that the sound power level of the print machines can increase about 1.3 dB in the condition of that the power of print machine increases from 50 HP to 100 HP. And we found that the sound power level of the print machines can increase about 1.0 dB for a increasement of 1,000 SPH(sheet per hour) of printing speed. The noise emission characteristics of print machine stuied in this paper will be useful to design the noise reduction plan in the future.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2007년도 학술대회
• /
• pp.64-68
• /
• 2007

Commercial WiBro and 3G HSDPA services are launched last year in order to provide high speed wireless Internet access and multimedia service. Currently mobile communication service providers concentrate on the deployment of indoor mobile network since indoor traffic is remarkably increased. For fine indoor wireless communication, an installation of access point system via Public IP network which is called Femtocell is required. The development of indoor Femtocell system must be considered in the viewpoint of low hardware complexity, cost reduction, interlocking with WiBro/HSDPA network without change of network component and easy element management. In this paper, we review the implementation issue and technology of dual mode AP which provides WiBro and HSDPA signal to the user simultaneously. Especially, we describe on the HSDPA Femtocell standardization status and possible 3 types of HSDPA communication module development design. Furthermore we analyze the merits and demerits of each HSDPA Femtocell design type and propose a system which enables handover between indoor HSDPA Femtocell and outdoor commercial HSDPA mobile network.

• 디지털산업정보학회논문지
• /
• 제10권1호
• /
• pp.73-79
• /
• 2014

In this study, the unmanned vehicle to develop a preliminary step, we were facilities for Automated Guided Vehicle (AGV) simulator is designed and implemented. Industry is increasingly the more advanced automation and management systems need to be efficient. These studies are at least 24-hour continuous unmanned vehicles and personnel can result in reduction of labor costs. In addition, safety accidents can be minimized in the industry as an effect of intelligent AGV is essential. This study is the initial step for the development of AGV. manufactured simulator to Simulation and drives the performance of the system is evaluated. The configuration of the simulator, ultrasonic sensors, infrared sensors, and using the obstacle were to follow a given path. In addition, two-way communication between the host computer and the main processor that was. communication method that IEE802.11 meets the standard is applied to high-speed wireless LAN systems, each of the sensor information is calculated. AGV having a drive shaft 4 of the four wheels are respectively independent structure. AGV's main processor is driven using a high-performance DSP, and the controller controls the steering device of the load could be significantly reduced.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.389-393
• /
• 2008

OFDM (Orthogonal Frequency Division Multiplexing) modulation using the orthogonal subcarriers reduces the delay spread by increasing robustness to multipath fading and can use overlapped bandwidth due to orthogonality on frequency domain. Thus data rate and spectral efficiency are increased. Because of these reason, OFDM is used for high speed data transmission for multimedia transmission as HSDPA, WiBro, WLAN. However OFDM also has drawbacks that have the high PAPR (Peak to Average Power Ratio). This high PAPR takes place because of parallel processing a number of data at once using a FFT processor. By high PAPR, amplifier doesn't act in dynamic range, so that BER performance is worse. In this paper, we reduce the PAPR using SLM(Selective Mapping). SLM doesn't effect on BER performance, but should transmit the side information for demodulation [2]. Also PAPR is higher as the number of FFT processor is larger. Thus SLM has high complexity. In this paper, we analyze the performance of SLM using scaling for no side information.