• 한국공작기계학회논문집
• /
• 제11권6호
• /
• pp.31-37
• /
• 2002

This paper presents a new motion control strategy for singularity avoidance in 6 DOF articulated robot manipulators, based on a speed limiting algorithm for joint positions and velocities. For a given task, the robot is controlled so that the joints move with acceptable velocities and positions within the reachable range of each joint by considering the velocity limit. This paper aims at the development of a new efficient method to control robot motion near and at singularities. The proposed method has focused on generating the optimal joint trajectory for a Cartesian end-effector path within the speed limit of each joint by using the speed limit avoidance as well as the acceleration/deceleration scheme. The proposed method was verified using MATLAB-based simulations.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.454-457
• /
• 2002

This paper presents a new motion control for singularity avoidance in 6 DOF articulated robot manipulators, based on a speed limiting algorithm for joint positions and velocities. For a given task, the robot is controlled so that the joints move with acceptable velocities and positions within the reachable range of each joint by considering the velocity limit. The proposed method was verified using MATLAB-based simulations.

• 한국항해항만학회지
• /
• 제30권10호
• /
• pp.779-785
• /
• 2006

선박의 충돌회피 방법을 제시하는 관점에 있어, 두 선박의 조우각도에 따라 속력이 충분히 고려되어야 할 것이다. 하지만 선박의 충돌회피를 위해 새롭게 연구된 근접상황 선박충돌회피지원 모델의 안전경계영역(Safe-Guard Ring) 설정은 본선과 상대선박의 속력비가 약 1.7이하로 제한되어 있으므로 제한된 범위 이외의 경우에서 충돌 위험이 존재 할 수 있다. 따라서 본 연구에서는 두 선박이 조우하는 각도 및 속력을 고려한 안전경계영역 설정을 연구함으로써 안전한 충돌회피 조종을 위한 선박충돌회피모델을 제시하고자 한다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 추계학술대회 논문집(제1권)
• /
• pp.23-29
• /
• 2006

선박의 충돌회피 방법을 제시하는 관점에 있어, 두 선박의 조우각도에 따른 속력이 충분히 고려되어야 할 것이다. 하지만 선박의 충돌회피를 위해 새롭게 연구된 근접상황 선박충돌회피지원 모델의 Safe-Guard Ring 설정은 본선과 상대선박의 속력비가 약 1.7 이하로 제한되어 있으므로 제한된 범위 이외의 경우에서 충돌 위험이 존재 할 수 있다. 따라서 본 연구에서는 두 선박이 조우하는 각도 및 속력을 고려한 Safe-Guard Ring 설정을 연구함으로써 안전한 충돌회피 조종을 위한 선박충돌회피모델을 제시하고자 한다.

• 한국항해항만학회지
• /
• 제31권5호
• /
• pp.333-338
• /
• 2007

본 논문에서는 선박충돌사고의 주요한 원인이 되는 인적운항과실의 감소 및 효과적인 선박충돌회피를 지원하기 위해 새로이 제안된 '속력을 고려한 선박충돌회피지원 모델'을 기반으로 한 선박충돌회피지원 프로그램 개발에 관하여 연구하였다. 이 프로그램은 선행 연구에서 고려되지 않은 상대선박의 속력이 고려되었으며, 자선의 선회특성을 이용하여 상대선박의 침로, 속도에 대한 충돌회피 가능영역과 방법을 표시함으로써, 근접상황에서도 효과적인 충돌회피 조종을 지원할 것이다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제5권2호
• /
• pp.188-198
• /
• 2013

In constructing a collision avoidance system, it is important to determine the time for starting collision avoidance maneuver. Many researchers have attempted to formulate various indices by applying a range of techniques. Among these indices, collision risk obtained by combining Distance to the Closest Point of Approach (DCPA) and Time to the Closest Point of Approach (TCPA) information with fuzzy theory is mostly used. However, the collision risk has a limit, in that membership functions of DCPA and TCPA are empirically determined. In addition, the collision risk is not able to consider several critical collision conditions where the target ship fails to take appropriate actions. It is therefore necessary to design a new concept based on logical approaches. In this paper, a collision ratio is proposed, which is the expected ratio of unavoidable paths to total paths under suitably characterized operation conditions. Total paths are determined by considering categories such as action space and methodology of avoidance. The International Regulations for Preventing Collisions at Sea (1972) and collision avoidance rules (2001) are considered to solve the slower ship's dilemma. Different methods which are based on a constant speed model and simulated speed model are used to calculate the relative positions between own ship and target ship. In the simulated speed model, fuzzy control is applied to determination of command rudder angle. At various encounter situations, the time histories of the collision ratio based on the simulated speed model are compared with those based on the constant speed model.

• 한국생산제조학회지
• /
• 제7권1호
• /
• pp.9-21
• /
• 1998

This paper a new solution approach to moving obstacle avoidance problem of a mobile robot. A new concept avoidability measure (AVM) is defined to describe the state of a pair of a robot and an obstacle regarding the collision between them. As an AVM, virtual distance function (VDF), is derived as a function of the distance from the obstacle to the robot and outward speed of the obstacle relative to the robot. By keeping the virtual distance above some positive limit value, the robot avoids the obstacle. In terms of the VDF ,an artificial potential field is constructed to repel the robot away from the obstacle and to attract the robot toward a goal location. At every sampling time, the artificial potential field is updated and the force driving the robot is derived from the gradient of the artificial potential field. The suggested algorithm drives the robot to avoid moving obstacles in real time. Since the algorithm considers the mobility of the obstacle as well as the distance, it is effective for moving obstacle avoidance. Some simulation studies show the effectiveness of the proposed approach.

• 제어로봇시스템학회논문지
• /
• 제3권2호
• /
• pp.169-178
• /
• 1997

This paper presents a new solution approach to moving obstacle avoidance problem of a robot. A new concept, avoidability measure(AVM) is defined to describe the state of a pair of a robot and an obstacle regarding the collision between them. As an AVM, virtual distance function(VDF) is derived as a function of three state variables: the distance from the obstacle to the robot, outward speed of the obstacle relative to the robot, and outward speed of the robot relative to the obstacle. By keeping the virtual distance above some positive limit value, the robot avoids the obstacle. In terms of the VDF, an artificial potential is constructed to repel the robot away from the obstacle and to attract the robot toward a goal location. At every sampling time, the artificial potential field is updated and the force driving the robot is derived from the gradient of the artificial potential field. The suggested algorithm drives the robot to avoid a moving obstacle in real time. Since the algorithm considers the mobility of the obstacle and robot as well as the distance, it is effective for moving obstacle avoidance. Some simulation studies show the effectiveness of the proposed approach.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 춘계학술대회 논문집
• /
• pp.88-93
• /
• 1998

This paper presents a new solution approach to moving obstacle avoidance problem for a mobile robot. A new concept avoidability measure(AVM) is defined to describe the state of a pair of a robot and an obstacle regarding the collision between them. As an AVM, virtual distance function(VDF) is derived as a function of the distance from the obstacle to the robot and outward speed of the obstacle relative to the robot. By keeping the virtual distance above some positive limit value, the robot avoids the obstacle. In terns of the VDF, an artificial potential field is constructed to repel the robot away from the obstacle and to attract the robot toward a goal location. At every sampling time, the artificial potential field is updated and the force driving the robot is derived form the gradient of the artificial potential field. The suggested algorithm drives the robot to avoid moving obstacles in real time. Since the algorithm considers the mobility of the obstacle as well as the distance, it is effective for moving obstacle avoidance. Some simulation studies show the effectiveness of the proposed approach.

• 한국ITS학회 논문지
• /
• 제15권5호
• /
• pp.71-82
• /
• 2016

C-ITS 단위 서비스 중 차량 추돌방지 지원 서비스는 위험상황 교통안전을 지원하나, 교통량이 많아 주변에 V2V 통신대상 차량이 많은 경우 V2V 통신부하로 인한 통신 지연 및 실패 가능성이 존재하여 서비스 효용성이 변화할 수 있다. 본 연구는 교통량이 증가하여 혼잡한 도로에서 V2V 통신 과다로 인한 차량 추돌방지 지원 서비스가 실패에 따른 도로 네트워크 영향을 모의실험으로 분석한 정량적 결과를 제시한다. 교통량 조건을 낮은 수준(서비스 수준 A) 높은 수준(서비스 수준 E)까지 변화하며, V2V 통신 실패율을 0%에서 100%까지 극단적인 상황을 포함하여 10% 씩 증가시키면서 차량 추돌방지 지원 서비스 효용성을 잠재상충 발생 건수를 지표로 분석하였다. 분석 결과 차량 1대당 잠재상충 발생 건수가 낮은 교통량 상황 대비 높은 교통량 상황에서 30% 수준 증가하는 것으로 확인되었다. 교통량이 충분히 증가하는 경우 통신 실패율 10% 증가에 따라 잠재상충 발생 건수가 14%씩 증가하는 것으로 분석되었다. C-ITS 단위 서비스 구현을 위한 기존 장비중심의 연구와 더불어 서비스의 효용성을 높일 수 있는 도로교통 운영분야 연구가 병행될 필요가 있음을 제언한다.