• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 1998년도 추계학술발표 논문집
• /
• pp.225-229
• /
• 1998

The purpose of the current study was comparative analysis of autonomic and electrocortical responses to passive and active touch of the tektites with different subjective emotional preference. Perspective goal of the project is development of a template for classification of tactile stimuli according to subjective comfort and associated physiological manifestations. The study was carried out on 36 female college students. Physiological signals were acquired by Grass and B10PAC 100 systems with AcqKnowledge III software. Frontal, parietal and occipital EEG (relative power spectrum /percents/ of EEG bands - delta, theta, slow and fast alpha, low and fast beta), and autonomic variables, namely heart rate (HR), respiratory sinus arrhythmia (RSA), pulse transit time (PTT), respiration rate (RSP) and skin conductance parameters (SCL, amplitude, rise time and number of SCRs) were analyzed for rest baseline and stimulation conditions. Analysis of the overall pattern of reaction indicated that autonomic response to tactile stimulation was manifested in a form of moderate HR acceleration, RSP increase, RSA decrease (lowered vagal tone), decreased n and increased electrodermal activity (increased SCL, several SCRs) that reflects general sympathetic activation. Parietal EEG effects (on contra-lateral side to stimulated hand) were featured by short-term alpha-blocking, slightly reduced theta and significantly increased delta and enhanced fast beta activity with few variations across stimuli. The main finding of the study was that most and least preferred textures exhibited significant differences in autonomic (HR, RSP, PTT, SCR, and at less extent in RSA and SCL) and electrocortical responses (delta, slow and fast alpha, fast beta relative power). These differences were recorded both in passive and active stimulation modes, thus demonstrating reproducibility of distinction between most and least emotionally preferred tactile stimuli, suggesting influence of psychological factors, such as emotional property of stimulus, on physiological outcome. Nevertheless, development of sufficiently sensitive .and reliable template for classification of emotional responses to tactile stimulation based on physiological response pattern may require more extensive empirical database.

• Journal of Biosystems Engineering
• /
• 제42권4호
• /
• pp.251-257
• /
• 2017

Purpose: A chisel mounted on working implement, such as agricultural machinery used in irregular farming conditions, is subjected to highly variable fatigue loading during work. To ensure the safety of the chisel on a working implement for the duration of its service life, fatigue testing must be performed with the proper fatigue test load conditions. In this study, working loads for a chisel were developed by reconstructing loads from strain gage data collected during field tests and used to conduct fatigue tests on the chisel component. Methods: FE analysis with nCode software was utilized to select the proper quantity and locations of strain gages for load measurements. A fatigue test was performed to experimentally verify the fatigue strength of the chisel and to evaluate the validity of the load history developed with the load reconstruction technique. Results: A strain history for the chisel was obtained from data collected during field tests. The data was filtered for the 14-16 km/h speed range, connected, and merged. The chisel load history was developed using the load reconstruction technique. The resulting load history was expressed as a load spectrum using the rain-flow counting method. Conclusions: A fatigue test was conducted on a chisel under a constant load condition with an equivalent load amplitude and number of cycles, as calculated by Miner's Rule for linear damage accumulation. During the fatigue test, there were no cracks at any position. It is concluded that the fatigue test method proposed in this study can be utilized successfully as a durability evaluation method for the chisel.

• 한국전자파학회논문지
• /
• 제10권6호
• /
• pp.847-854
• /
• 1999

본 논문에서는 2차원 유한차분 시간영역 방법을 사용하여 균일 평변 전송선로의 고차 모드 주파수 분산 특성을 해석하였다. 전자계 스펙트럼의 크기만을 사용하는 기존 방볍과는 달리, 퓨리에 계수의 크기 및 위상 특성을 동시에 사용함으로써, 다른 공진모드에 비하여 스펙트럼의 크기가 상대적으로 착을 경우에도 모드 식 별이 용이하도록 하였다. 수치해석 결과, 20 GHz 이내에서 스트립 선로에서는 고차 모드가 몇 개 발생되지 않았지만, 접지된 coplanar waveguide에서는 상당히 많은 고차 모드가 발생되며, 특히, 첫 번째 고차 모드가 기본 모드에 매우 근접해 았었다 이와 같이, 기본 모드와 고차 모드가 매우 근접하여 있는 경우 또는 고차 모드가 매우 많이 발생되는 평변형 전송선로의 해석에 본 연구에서 해석 방볍이 효과적으로 적용될 수 있다.

• 한국지반공학회논문집
• /
• 제34권1호
• /
• pp.25-35
• /
• 2018

구조물-지반-구조물 상호작용을 확인하기 위하여 다양한 크기를 가지는 얕은 기초에 대하여 원심모형실험에 의한 진동대실험을 실시하고 결과를 분석하였다. 낙사법을 이용하여 지반을 조성하였으며, 두 기초의 이격 거리 및 매립에 따른 거동을 평가하였다. 원심모형실험 시 측정된 깊이별 지반 가속도는 입력 지진파의 크기가 증가함에 따라 증가하는 경향을 보였으며, 증폭 현상에 의하여 지표면에서 가장 큰 값을 보였다. 두 기초의 이격 거리가 줄어듦에 따라 구조물-지반-구조물 상호작용에 의하여 가속도 응답 스펙트럼 비(RRS)의 크기는 커지며, RRS 값이 최대가 되는 주기는 줄어 들었다. 동일한 이격 거리에서 기초가 지반에 매립될 경우, 두 기초의 RRS는 감소하는 경향을 보였다.

• 대한공업교육학회지
• /
• 제31권1호
• /
• pp.185-199
• /
• 2006

본 연구에서는 구조물이 횡방향으로 음압을 받을 경우 이를 감지하기 위하여 Fabry-Perot형 광섬유 배열 센서를 제작하고 실험하였다. 이는 한 개의 광원으로 두 개의 센서가 병렬로 연결되고 센서의 출력신호를 보기 위한 별도의 신호처리기가 필요 없는 구조이다. 횡방향 음압을 임의의 음원 주파수인 100Hz, 200Hz 및 655Hz의 주파수를 무지향성 스피커에 인가하였으며 $60cm{\times}60cm{\times}60cm$의 격자 구조물에 부착된 두 개의 배열 센서가 잡은 신호를 분석하였다. 시간 영역에서 두 개의 센서 신호는 진폭에 약간의 차이는 있으나 음원 주파수를 잘 감지함을 확인 하였다. 센서가 실제로 양단이 지지된 구조의 배열 센서를 모델링하고 그 해를 실험결과와 비교하였다. 2kHz의 음원을 배열 센서에 인가하였더니 이론 해석과 비교적 잘 일치하는 측정 결과를 얻었다.

• Wind and Structures
• /
• 제10권3호
• /
• pp.233-247
• /
• 2007

The insertion of steel braces has become a common technique to limit the deformability of steel framed buildings subjected to wind loads. However, when this technique is inadequate to keep floor accelerations within acceptable levels of human comfort, dampers placed in series with the steel braces can be adopted. To check the effectiveness of braces equipped with viscoelastic (VEDs) or friction dampers (FRDs), a numerical investigation is carried out focusing attention on a three-bay fifteen-storey steel framed building with K-braces. More precisely, three alternative structural solutions are examined for the purpose of controlling wind-induced vibrations: the insertion of additional diagonal braces; the insertion of additional diagonal braces equipped with dampers; the insertion of both additional diagonal braces and dampers supported by the existing K-braces. Additional braces and dampers are designed according to a simplified procedure based on a proportional stiffness criterion. A dynamic analysis is carried out in the time domain using a step-by-step initial-stress-like iterative procedure. Along-wind loads are considered at each storey assuming the time histories of the wind velocity, for a return period $T_r=5$ years, according to an equivalent wind spectrum technique. The behaviour of the structural members, except dampers, is assumed linear elastic. A VED and an FRD are idealized by a six-element generalized model and a bilinear (rigid-plastic) model, respectively. The results show that the structure with damped additional braces can be considered, among those examined, the most effective to control vibrations due to wind, particularly the floor accelerations. Moreover, once the stiffness of the additional braces is selected, the VEDs are slightly more efficient than the FRDs, because they, unlike the FRDs, dissipate energy also for small amplitude vibrations.

• Ocean Systems Engineering
• /
• 제10권1호
• /
• pp.87-110
• /
• 2020

Catamaran has recently been a choice to support a typical vertical axis turbine in floating tidal current energy conversion system. However, motion responses associated with the catamaran can reduce the turbines efficiency. The possibility to overcome this problem isto change the catamaran parameter by varying and simulating the demi-hull separations to have lower motion responses. This simulation was undertaken by Computational Fluid Dynamic (CFD) using potential flow analysis. Cases of demi-hull separation were considered, with ratios of demi-hull separation (S) to the breadth of demi-hull (B), ^S/_B of 3.45, 4.95, 6.45, 7.2 and 7.95. In order to compare to the previous works in the literature, the regular wave was set with wave height of 0.8 m. Furthermore, the analysis was carried out by irregular waves with significant wave height, H_s, of about 0.09 to 1.5 m and the wave period, T, of about 1.5 to 6 s or corresponding to the wave frequency, ω, of about 1.1 to 4.2 rad/s. The wave spectrum was derived from the equation of the International Towing Tank Conference (ITTC). For the case of turbines-loaded catamaran under consideration, the new finding is that the least significant amplitude response can be satisfied at the ratio ^S/_B of 7.2. This study indicates that selecting a right choice of demi-hull separation ratio could contribute in reducing motion responses of the tidal current turbines-loaded catamaran.

• 지구물리와물리탐사
• /
• 제19권2호
• /
• pp.84-90
• /
• 2016

신규 센서의 성능과 노후화된 센서의 성능 평가를 하는 것은 지진 감시 및 지진연구에 있어서 매우 중요하다고 할 수 있다. 특히 센서 주파수 응답은 지진자료의 보정을 위해서 필수적으로 사용되고 있다. 이 연구에서는 주파수 스펙트럼비를 이용한 지진 기록계의 보정 방법과 시간영역 대역통과필터(bandpass filter)와 힐버트(Hilbert) 변환을 이용한 지진계 주파수 응답을 계산하는 방법을 제시하고자 하였다. 실내 진동대 실험에서 가속도 센서(CMG-5T 1g, 2g 센서)를 설치하고 제안된 방법으로 센서 주파수 응답스펙트럼을 구하였을 때 좋은 결과를 얻을 수 있었다. 또한 2011년 도호쿠 대지진에 대하여 서울대학교 관측소(SNU)의 STS-2와 ES-T에서 얻어진 자료에 대하여 제안된 방법을 적용한 결과 STS-2 광대역 센서의 저주파수 대역에 대한 주파수 응답을 얻을 수 있었다. 대역통과필터와 힐버트 변환 방법을 이용할 경우, 주파수 스펙트럼비를 이용한 방법보다 신호대 잡음이 낮은 부분에서도 명확한 주파수 응답스펙트럼을 보여주었다.

• 한국지진공학회논문집
• /
• 제24권5호
• /
• pp.219-232
• /
• 2020

The slip-weakening model developed by Ohnaka and Yamashita is extended over the breakdown zone by equating the scaling relationships for the breakdown zone and the whole rupture area. For the extension, the study uses the relationship between rupture velocity and radiation efficiency, which was derived in the theory of linear elastic fracture mechanics, and the definition of f_max given in the specific barrier model proposed by Papageorgiou and Aki. The results clearly show that the extended scaling relationship is governed by the ratio of rupture velocity to S wave velocity, and the velocity ratio can be determined by the ratio of characteristic frequencies of a Fourier amplitude spectrum, which are corner frequency, f_c, and source-controlled cut-off frequency, f_max, or vice versa. The derived relationship is tested by using the characteristic frequencies extracted from previous studies of more than 130 shallow crustal events (focal depth less than 25 km, M_W 3.0~7.5) that occurred in Japan. Under the assumption of a dynamic similarity, the rupture velocity estimated from f_max/f_c and the modified integral timescale give quite similar scale-dependence of the rupture area to that given by Kanamori and Anderson. Also, the results for large earthquakes show good agreement to the values from a kinematic inversion in previous studies. The test results also indicate the unavailability of the spectral self-similarity proposed by Aki because of the scale-dependent rupture velocity and the rupture velocity-dependent f_max/f_c; however, the results do support the local similarity asserted by Ohnaka. It is also remarkable that the relationship between the rupture velocity and f_max/f_c is quite similar to Kolmogorov's hypothesis on a similarity in the theory of isotropic turbulence.

• 천문학논총
• /
• 제30권2호
• /
• pp.219-221
• /
• 2015

We present our recent observations of SDSS J102102.25+174439.9, a new eclipsing white dwarf - main sequence WDMS binary with an orbital period of 0.14 days. This system belongs to the post common-envelope binary group as shown by the spectrum from the Sloan Digital Sky Survey. We obtained our data using the ULTRASPEC instrument installed on the 2.4-m telescope at the Thai National Observatory (TNO). Our multi-band observations reveal an unusual and persistent drop in brightness after the primary eclipse. These dips, which appear to show variations in amplitude, also have a complex shape that changes within days. Dips in WDMS systems have been observed on only one other occasion, in the light curve of QS Vir prior to the eclipse of the white dwarf. The dips in SDSS J1021+1744 are unique because they are present at different wavelengths and they occur approximately at similar phases. Hosting a DA white dwarf and an M4 companion star, this system is known to be the only WDMS to show these kind of dips in its light curve. It is possible that these dips are caused by ejected materials from an active companion star, such as in QS Vir. The light curve in the g' filter exhibits deep and narrow features, implying that the material which passes in front of the white dwarf in SDSS J1021 must be dense and small in size. Furthermore, we try to constrain the stellar and orbital parameters of SDSS J1021+1744 using the Binary Maker 3 software. We use g' and r' data for our light curve analysis to have a better approximation for the red dwarf star.