• Korean Journal of Optics and Photonics
• /
• v.14 no.6
• /
• pp.594-599
• /
• 2003

By using the spectroscopic ellipsometry, we have measured and analyzed the optical characteristics of P $r^3$$^{+}$-doped selenide glasses of Ge-Sb-Se system, a strong candidate material for U band fiber amplifiers. The ellipsometric spectra measured in the transparent wavelengths range of the material were all fitted to a model consisting of ambient/roughness/thin fil $m_strate structures to obtain simultaneously the optical properties such as refractive index, in terms of Sellmeier parameters and film structure of P $r^3$$^{+}$-doped selenide glasses. Repeated measurements on different positions in both polished faces rendered to verify positional dependence of measured spectre-ellipsometric data. Hence, the model made possible the analysis of the optical characteristics of the glasses. Even though surface roughness was mainly responsible for the position dependencies, the averaged refractive indexes were as precise as to reflect the minute compositional change tantamount to 1 mol%. The measured refractive indexes are useful for design of core and clad compositions of single-mode selenide optical fibers.

• Proceedings of the Optical Society of Korea Conference
• /
• 2004.02a
• /
• pp.148-149
• /
• 2004

• Transactions of the Korean hydrogen and new energy society
• /
• v.17 no.1
• /
• pp.109-116
• /
• 2006

The heat treatment characteristics of natural talc sample was investigated in diverse analytical view point. The mass decrease comes to heat treatment was resulted by the continuous and the discontinuous process and the obtained result show very similar two step profiles with 8.9 % mass decrease. The dehydroxylation of -OH groups contained talc crystal was analyzed by spectroscopic method and the crystallographic variations was also observed after heat treatment. According to XPS result, the magnesium hydroxide($Mg(OH)_2$) of untreated talc powder changed to magnesium oxides(MgO) after heat treatment.

• Korean Journal of Optics and Photonics
• /
• v.14 no.5
• /
• pp.565-569
• /
• 2003

We designed a transflective-type LCD using a twisted VA mode. Generally, a VA mode had a blue shift due to intrinsic properties. We solved this problem using spectroscopic compensation film. We used the front scattering film and negative C-plate to improve characteristics of the viewing angle and contrast ratio. As a result, we found that proposed the transflective-type TVA mode had a contrast ratio of about 80:1, a response time of 22 ms, and a reflectance of 25% in comparison with the standard MgO reflector.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1998.06a
• /
• pp.49-54
• /
• 1998

The growth of diamond films in plasma enhanced chemical vapor deposition(PECVD) processes requires high substrate temperatures and gas pressures, as well as high-power excitation of the gas source. Thus determining the substrate temperature in this severe environment is a challenge. The issue is a critical one since substrate temperature is a key parameter for understanding and optimizing diamond film growth. The precise Si substrate temperature calibration based on rapid-scanning spectroscopic ellipsometry have been developed and utilized. Using the true temperature of the top 200 ${\AA}$ of the Si substrate under diamond growth conditions, real time spectroellipsometry (RTSE) has been performed during the nucleation and growth of nanocrystallind thin films prepared by PECVD. RTSE shows that a significant volume fraction of nondiamond(or{{{{ {sp }^{2 } -bonded}}}}) carbon forms during thin film coalescence and is trapped near the substrate interface between ∼300 ${\AA}$ diamond nuclei.

• Publications of The Korean Astronomical Society
• /
• v.15 no.spc1
• /
• pp.127-132
• /
• 2000

The purposes of spectroscopy in astronomy are to measure the radiation flux of the spectroscopic emission or absorption line and to measure the dynamical parameters of the line profile. In order to use an appropriate instrument for the scientific purpose, we need to understand the characteristics of various spectrometers, e.g., a prism spectrometer, a grating spectrometer, and a Fabry-Perot spectrometer (FPS), which are being used in ultra-violet, optical, and infrared bands. The Fabry­Perot spectrometer is not very popular compared to the grating spectrometer, because of its complex and tricky operations. The Fabry-Perot spectrometer, however, can get a two-dimensional image at one exposure, so we can study radiation mechanisms and dynamical properties of extended sources, e.g., clusters, nebula, and galaxies.

• Publications of The Korean Astronomical Society
• /
• v.9 no.1
• /
• pp.111-166
• /
• 1994

I have developed a UV and visible spectroscopic database (UVSD) for atoms and molecules, which are found in interstellar medium, stars, galaxies, and in the atmospheres of the earth, planets, satellites, and comets. This UV and visible database, which is machine-readable, consists of three different sub-databases depending upon the characteristics of the sub-databases: (A) atomic and molecular line listings from laboratory observations or theoretical studies; (B) absorption spectra measured in laboratories; and (C) solar UV, visible, and infrared spectral atlases. The UVSD is in a very initial stage of development compared with other well organized and established infrared and microwave databases. In order to make a good quality and complete database, substantial efforts should be made for the acquisition of scattered important data from laboratories or institutions, and then the acquired heterogeneous data should be peer-reviewed and standardized.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.04a
• /
• pp.397-400
• /
• 2003

In this study, humic and fulvic acids in soils at the vicinity of domestic atomic power plants(NPPs), located in Yungkwang(YK), Uljin(UJ), Kori(KR), Koseong(KS), Wolseong(WS) area, and in volcanic ash soils of the Cheju island(Mt. Hanla(HL), Manjanggul(MJ)) were isolated, and characterized using chemical(elemental analysis, proton exchange capacity, molecular size distribution) and spectroscopic(UV/Vis., IR, FL, $^{13}$ C NMR spectra) methods. The results were compared with one another and compiled for their DB establishments. The humic substances distribution (humic acid, fulvic acid, Humin) in the soils were also determined by IHSS standard method. Main purpose of this study was to provide a basic data needed to evaluate the effect of humic substances on the migrational behaviour of radioactive elements in contaminated surface soil.

• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.699-705
• /
• 1995

Monolayers of hypericin, a photodynamic polycyclic quinoidal compound, were prepared at the air-water interface, and were transferred to metal substrates to form Langmuir-Blodgett (LB) monolayers. The structural characteristics of hypericin LB monolayers and self-assembled (SA) monolayers were investigated using surface-enhanced resonance Raman scattering (SERRS) spectroscopy. Both the spectroscopic data and the surface pressure - area (${\pi}-A$) isotherms suggest that hypericin forms ${\pi}-{\pi}$ aggregates that orient vertically to the subphase surface. Whereas the ordering and orientation of control was less effective in SA monolayers, a higher structural regularity was attained in LB systems. The effect of subphase on the structural integrity of the monolayer was also investigated.

• Journal of the Korean Chemical Society
• /
• v.13 no.1
• /
• pp.75-82
• /
• 1969

4-Ethyltropolone has been prepared in three steps from cyclopentadiene by a dichloroketene process, and at the same time, a comparison has also been made with the case of tropolone synthesis. In the addition reaction of dichloroketene to cyclopentadiene as well as to ethylcyclopentadiene, and also in the separation of cycloadducts from reaction mixture, the best results were given by prevention of the reactants from dimerization. Under these condition, the yields of cycloadducts were around 70% for both. Tropolone and 4-ethyltropolone were obtained in the yield of 51% and 32%, respectively, by hydrolysis of cycloadducts with potassium acetate in aqueous acetic acid. These results revealed that the steric effect of ethylgroup was more sensitive to the hydrolysis than to the cycloaddition reaction. A comparison of UV, IR and NMR spectroscopic results of 4-ethyltropolone with those of tropolone was also made together with a brief discussion of the tropolone ring system and ethylgroup effect.