• Journal of Advanced Navigation Technology
• /
• v.5 no.1
• /
• pp.54-61
• /
• 2001

In conventional Ultra Wide Band(UWB) system, it uses Pulse Positioning Modulation Method to modulate data signal. In this paper, however, we derive power spectral density characteristic of time hopped antipodal signal using stochastic process. UWB signal employes Gaussian monopulse and Rayleigh monopulse which pulse width is 0.5 nsec and interval is 5 nsec. But comb line which produces unintentionally could be evidently reduced by the time hopped code, so this code be used to channelize for multiple access and minimize to different communication system.

• Journal of the Korean Chemical Society
• /
• v.38 no.11
• /
• pp.792-799
• /
• 1994

The spectral changes of 3,3'-diethyl oxacarbocyanine(DOC) in the aqueous solution and in the presence of polyacrylic acid(PAA) were studied by means of absorption and fluorescence spectroscopy. The spectral change of DOC in the aqueous solution with concentration changes is attributed to the formation of dimer. In the presence of PAA, the characteristic changes of metachromatic band with changes of P/D (the ratio between available binding site and the dye concentration) are found and the discussions are made in terms of stacking theory. A kinetic study of the interaction between DOC and PAA was also investigated by the absorption and fluorescence stopped-flow spectroscopy. The observed relaxation effect in PAA-DOC system can be described quantitatively by assuming two relaxation processes occur.

• Journal of Biomedical Engineering Research
• /
• v.28 no.2
• /
• pp.271-279
• /
• 2007

We suggest a novel method for the evaluation of cochlear implant (CI) speech processing strategy based on neural spike train decoding. From formant trajectories of input speech and auditory nerve responses responding to the electrical pulse trains generated from a specific CI speech processing strategy, optimal linear decoding filter was obtained, and used to estimate formant trajectory of incoming speech. Performance of a specific strategy is evaluated by comparing true and estimated formant trajectories. We compared a newly-developed strategy rooted from a closer mimicking of auditory periphery using nonlinear time-varying filter, with a conventional linear-filter-based strategy. It was shown that the formant trajectories could be estimated more exactly in the case of the nonlinear time-varying strategy. The superiority was more prominent when background noise level is high, and the spectral characteristic of the background noise was close to that of speech signals. This confirms the superiority observed from other evaluation methods, such as acoustic simulation and spectral analysis.

• Journal of Biomedical Engineering Research
• /
• v.28 no.6
• /
• pp.750-755
• /
• 2007

The linear SEF (Spectral Edge Frequency) parameter and spectrum analysis method can not reflect the non-linear of EEG. This method can not contribute to acquire real time analysis and obtain a high confidence in the clinic due to low discrimination. To solve the problems, the development of a new index is carried out using the bispectrum analyzing the EEG including the non-linear characteristic. At the bispectrum analysis of the 2 dimension, the most significant's power spectrum density peaks appeared much at the specific area in awake and anesthesia state. Because many peaks are showed at the specific area in the frequency coordinate, these points are used to create the new index. Range of the index is 0-100. At the anesthesia, the index is 20-50 and at the awake, the index is 90-60. New index can discriminate the awake and anesthesia state.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.11
• /
• pp.1074-1083
• /
• 2011

Noise of digital camera has been noticeable to its users. Particularly, noise of a barrel assembly module in zoom in/zoom out operation is recorded while taking a video. Reduction of barrel noise becomes crucial but there are not many studies on noise of digital camera due to its short history of use. In this study, experiment-based analyses are implemented to identify sources of noise and vibration because of complexity and compactness of the barrel system. Output noise is acquired in various operation conditions using synchronization for spectral analysis. Noise sources of a barrel assembly in zoom operating are first identified by the comparison with gear frequency analysis and then correlation analysis between noise and vibration is applied to confirm the generation path of noise. Analysis on noise transfer characteristic of zoom module is also carried out in order to identify the most contributing components. One of possible countermeasures of noise in zoom operating is investigated by an experimental approach.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.999-1002
• /
• 2002

In this paper, we proposes an adaptive method for reducing the computational overhead of fine-to-coarse MRME at the finest resolution level by considering for the spatial and spectral characteristics between wavelet decomposition levels simultaneously. As we know, there is high correlation between the adjacent blocks and it can give the very important clue to estimate motion at finest level. So, in this paper, using the initial motion vector and the adjacent motion vector in the coarsest level, we determine the optimal direction that will be minimized the estimation error in the finest level. In that direction, we define the potential searching region within the full searching region that is caused to increase much computational overhead in the FtC method. Last, in that region, we process the efficient 2-step motion estimation. and estimate the motion vector at finest resolution level. And then, this determined motion vector is scaled to coarser resolutions. As simulation result, this method is similar to computational complexity of the CtF MRME method and very significantly reduces that of the FtC MRME method. In addition, they provide higher quality than CtF MRME, both visually and quantitatively

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.10
• /
• pp.1-6
• /
• 1998

The dielectric effects of plastic packages on GaAs($\varepsilon$$_{r}$=13) MMIC microstrip characteristics are analyzed using the spectral domain method (SDM). As being packaged by typical FR-4 composites ($\varepsilon$$_{r}$=14.2) for PCB substrates and plastic packages, the characteristic impedance is reduced by about 6 %, but the effective dielectric constant is increased by 13 % from those of bare microstrip, respectively. The parasitic effects of the packaging materials can greatly degrade the performance of the packaged MMIC. We also calculated the optimum microstrip width, which maintains the 50 $\Omega$ matching condition after plastic packaging. These calculated results can be used to optimize the plastic packages, and extend the application ranges for low cost MMIC production.n.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.5
• /
• pp.795-801
• /
• 2001

A method of miniaturizing branch line coupler is presented. The method utilizes the microstrip line with overlay(or superstrate). The frequency dependent characteristics, dispersion and characteristic impedance, of this line are obtained by Immitance method in spectral domain and Method of Line. The relevant spectral domain Green's function is given and used to obtain numerical results. The branch line couplers with overlays are designed and fabricated at 2 GHz. The experimental results show that the size of coupler with overlay(${epsilon}_r$=10.2) is 31.4 precent smaller than conventional coupler. This minimized coupler is suitable for Butler Matrix as feeder for mobile communication beam forming antenna.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.2
• /
• pp.186-196
• /
• 2000

In this paper, modified square loop frequency selective surface for dualband communication antenna systems is proposed, and the scattering characteristics is discussed. The analysis for the problem of scattering by periodic structures with a dielectric slab is formulated using the spectral-domain immittance approach and Floquet's theorem. The method of moments which uses rooftop subdomain basis function is employed to solve the equations. Numerical results include the comparison between the transmission characteristic of general square loop and that of modified square loop. Also, the transmission characteristics of modified square loop for arbitrary incident angle and polarization is presented. To verify analysis results, modified square loop frequency selective surface was fabricated and the calculated results were compared with the measured results. The measured results showed good agreement with the calculated results.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.100.1-100.1
• /
• 2012

We present results of AKARI observations toward 8 dense molecular cores which are previously known to be "starless". These cores show some spectral features which may imply characteristic internal motions. The observations were carried out at 8 bands (3, 4, 7, 11, 65, 90, 140, and 160 micron) with IRC and FIS instruments equipped in the AKARI. The archive data of 2MASS and Spitzer were also utilized. We found that 1 (L1582A) of 8 cores has a few embedded young stellar objects (YSOs) while the rest of them are still starless. The YSOs found in L1582A are identified by the slope of the spectral energy distribution or by the AKARI color-color diagram. The unusually broad linewidth toward L1582A, which is twice broader than one of starless cores, is also consistent with the existence of protostars in this core. The physical environment and evolution of the other "starless" cores where any AKARI point source is not detected will be discussed with help of their molecular line observations.