• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.12
• /
• pp.1347-1355
• /
• 2009

This paper demonstrates the validity of spectral element analysis for modeling the high-frequency dynamic behaviors of a beam with a surface-bonded piezoelectric wafer through a laboratory test. In the spectral element analysis, the high-frequency electro-mechanical interaction can be considered properly with relatively low computational cost compared to the finite element analysis. In the verification test, a cantilever beam with a surface-bonded piezoelectric wafer is forced to be in steady-state motion by exerting the harmonic driving voltage signal on the piezoelectric wafer. A laser scanning vibrometer is used to obtain the overall dynamic responses of the structure such as resonance frequencies, the associated mode shapes, and frequency response functions up to 20 kHz. Then, these dynamic responses from the test are compared to those computed by the spectral element analysis. A two-dimensional finite analysis is conducted to obtain the asymptotic solutions for the comparison purpose as well.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.397-400
• /
• 2007

For mapping the distribution of heavy metals in the mining area, field spectroscopy and hyperspectral remote sensing were used in this study. Although heavy metals are spectrally featureless from the visible to the short wave infrared range, possible variations in spectral signal due to heavy metals bound onto minerals can be explained with the metal binding reaction onto the mineral surface. Variations in the spectral absorption shapes of lattice OH and oxygen on the mineral surface due to the combination of heavy metals were surveyed over the range from 420 to 2400 nm. Spectral parameters such as peak ratio and peak area were derived and statistically linked to metal concentration levels in the streambed samples collected from the dry stream channels. The spatial relationships between spectral parameters and concentrations of heavy metals were yielded as well. Based on the observation at a ground level for the relationship between spectral signal and metal concentration levels, the spectral parameters were classified in a hyperspectral image and the spatial distribution patterns of classified pixels were compared with the product of analysis at the ground level. The degree of similarity between ground dataset and image dataset was statistically validated. These techniques are expected to support assessment of dispersion of heavy metal contamination and decision on optimal sampling point.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.4
• /
• pp.442-449
• /
• 1986

본 연구에서는 소음원 및 진동원을 규명하기 위하여 사용되어 온 종래의 주파 수응답함수(Frequency Response Function`FRF)법과 소음원 및 진동원 간에 강한 상관 관계가 존재한 경우에 사용되는 기여도함수(coherence function)법을 이용한 다차원 스텍트럼해석(Multi-Dimensional Spectral Analysis`MDSA)법에 의하여 가속도응답 및 방사음과의 기여관계를 규명하였다.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.411-416
• /
• 2004

This paper introduces a fast Fourier transform (FFT)-based spectral analysis method for the transient responses as well as the steady-state responses of linear dynamic systems with non-proportional damping. The force vibration of a non-proportionally damped three-DOF system is considered as the illustrative numerical example. The proposed spectral analysis method is evaluated by comparing with the numerical solution obtained by the Runge-Kutta method

• Journal of Communications and Networks
• /
• v.1 no.2
• /
• pp.81-85
• /
• 1999

The regrowth of OQPSK power spectral sidelobes from AM/AM and AM/PM amplifier nonlinearity is analyzed. The time-domain expression for amplifier output shows how spectral re-growth will depend on the cubic coefficient of the Taylor's series of the amplifier nonlinearity as well as input amplitude ripple. Closed form spectrum calculations show that the spectral sidelobes produced by AM/PM take the same form as those produced by AM/AM. The rate of growth of AM/PM sidelobes is, however, not as great as for AM/AM.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1158-1159
• /
• 2009

Tri-stimulus values of CIE-XYZ and RGB values obtained by photographic film, CCD camera or scanner depend on the spectral sensitivity of imaging devices and the spectral radiant distribution of the illumination. It is important to record and reproduce the reflectance spectra of the object for true device independent color reproduction and high accurate recording of the scene. In this paper, a method to record the reflection spectra of the object is introduced and its application to spectral endoscopes is presented.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.438-443
• /
• 1998

In this paper, the axial-bending coupled equations of motion for an elastic layered beam are derived. From this equation of motion, the spectral element is formulated for the vibration analysis by use of the spectral element method (SEM). The modal analysis methodology for the present coupled field equations of motion is then developed. As an illustrative example, a cantilevered beam is considered. The correctness of the equations of motion developed herein is verified by gradually reducing the thickness of upper elastic layer to converge to the single layered elastic beam solutions. Also, the accuracy of spectral element is confirmed by comparing its results with the result by modal analysis.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.4 s.235
• /
• pp.578-583
• /
• 2005

This paper introduces a fast Fourier transform (FFT)-based spectral dynamic analysis method for the transient responses as well as the steady-state responses of the linear discrete systems subject to non-zero initial conditions. The forced vibration of a viscously damped three-DOF system is considered as the illustrative numerical example. The proposed spectral analysis method is evaluated by comparing its results with the exact analytical solutions and the numerical solutions obtained by the Runge-Kutta method.

• Wind and Structures
• /
• v.2 no.2
• /
• pp.105-117
• /
• 1999

The various spectral density functions of wind are applied in the wind process simulation by the spectral representation method. In view of the spectral density functions, the characteristics of the simulated processes are compared. The ensemble spectral density functions constructed from the simulated sample processes are revealed to have the similarity not only in global shape but also in the maximum values with the target spectral density functions with a high accuracy. For the correlation structure to be satisfied in the circumferential direction on the cooling tower shell, a new formula is suggested based on the mathematical expression representing the circumferential distribution of the wind pressure on the cooling tower shell. The simulated wind processes are applied in the dynamic analysis of cooling tower shell in the time domain and the fluctuating stochastic behavior of the cooling tower shell is investigated.

• Economic and Environmental Geology
• /
• v.22 no.1
• /
• pp.81-87
• /
• 1989

Many depth estimation techniques for magnetic exploration, such as the slope methods, graphica1 methods, spectral analysis, and Fourier ana1ysis have been published. Nevertheless, it appears that the half-slope method of Peters(1949)and the maximum-slop method of Vacquier et. al. (1951)are more popular and widely used by geophysicists in the hydrocarbon exploration industry. The slope methods are not only simpler and easier to use but are also genera1ly reliable. The spectral method is fast, effective, and powerful in the determination of an average depth. The often unreliable results produced from spectral techniques are attributed to their application to isolated magnetic anomaly cases. The reliability and limitations associated with the method are given in order to minimize problems and increase accuracy in the application of the method.