• International Journal of Computer Science & Network Security
• /
• v.22 no.1
• /
• pp.175-182
• /
• 2022

This work presents a simulation model for a specific UV disinfection system (UVDS) powered by a Photovoltaic System. The global UVDS also includes the electronic converters, Electronic Ballast, UV Lamp and Motor Pump. The equations that model the physical components' behaviour are connected to obtain a dynamic global model. The latter is converted in a Simulink/Matlab model, which allows to carry out simulation series concerning the entire UVDS. The physical parameters: the irradiation G and the temperature T, are considered as inputs. series of measurements carried out in order to show how these parameters affect the current, the voltage of the PVs and especially the value of the current of the UV lamp, on the other hand a study on the behavior and the evolution of the parameters of the motor pump such as the armature current, motor torque, speed of rotation and the water flow. The purpose of all this is to realize how important are the two parameters concerning the lamp current and the water flow because they are two very important factors to keep an adequate water quality.

• Nuclear Engineering and Technology
• /
• v.54 no.8
• /
• pp.2974-2988
• /
• 2022

Implementation of component isolation in nuclear industry is challenging due to gaps in research and the lack of specific guidelines. In this study, parameters affecting component-level isolation of advanced reactor vessels are identified based on a representative numerical model with explicit consideration of nonlinear soil-structure interaction (SSI). The objective of this study is to evaluate the effectiveness of, and to identify potential limitations of using conventional friction pendulum bearings to seismically isolate vessels. It is found that slender vessels or components are particularly vulnerable to rotational accelerations at the isolation interface, which are caused by rotation of the sub-structure and by excitation of higher modes in the horizontal direction of the seismically isolated system. Component isolation is found to be more effective for relatively stiffer vessels and at sites with stiff soil. Considering that conventional isolators are deficient in resisting axial tension, it is observed that the optimum location for supporting a component to achieve seismic isolation, is at a cross-sectional plane passing through the center of mass of the vessel. These findings are corroborated by numerous simulations of the response of seismically isolated reactor vessels at different nuclear power plant sites subject to a variety of ground motions.

• Korean Journal of Pharmacognosy
• /
• v.53 no.3
• /
• pp.119-124
• /
• 2022

Vaginal microbiome deeply influences vaginal health via production of messenger molecules. The healthy vaginal pH ranges between 3.5 and 4.5. However, dysbiosis of vaginal microbiome increases the pH level, leading to the incidence of vaginitis. The commensal vaginal bacterium Dermabacter vaginalis-which was isolated from the vaginal fluid of a Korean female-was incubated in acidic and neutral pH to simulate healthy and vaginitis conditions, respectively. The chemical profiles of the two different cultures were compared using HPLC. The compound showing distinctive difference between the two sets of data was presumed to be a chemical messenger, which was identified as cyclo(L-pro-L-met) by analysis of NMR, MS, and specific rotation data. Synthesis was achieved in three steps (overall yield 15%), enabling structure confirmation and antimicrobial evaluation against vaginal pathogens. Cyclo(L-pro-L-met) showed antifungal activity against Candida albicans, a major cause of vulvovaginal candidiasis.

• The Journal of Korea Robotics Society
• /
• v.17 no.1
• /
• pp.48-57
• /
• 2022

In this paper, we propose a legged landing platform for the quadcopter taking off and landing in the ship environment. In the ship environment with waves and winds, the aircraft has risks being overturned by contact impact and excessive inclination during landing on the ship. This landing platform has four landing legs under the quadcopter for balancing and shock relief. In order to make the quadcopter balanced on ships, the position of each end effector was controlled by PID control. And shocks have mainly happened when quadcopter contacts the ship's surface as well as legs move fast. Hence, impedance control was used to cope with the shocks. The performance of the landing platform was demonstrated by a simulation and a prototype in three sea states based on a specific size of a ship. During landing and tracking the slope of the ship's surface, oscillations of rotation and translation from the shock were mitigated by the controller. As a result, it was verified that transient response and stability got better by adding impedance control in simulation models and prototype experiments.

• Journal of Space Technology and Applications
• /
• v.3 no.4
• /
• pp.322-332
• /
• 2023

Satellite attitude-control actuators are equipped with a reaction wheel for three-axis attitude control. The reaction wheel rotates a motor inside the actuator to generate torque in the vector direction. When using the reaction wheel, there are restrictions on the torque values generated as the motor rotates. The torque value of the reaction wheels mounted on small satellites is approximately 10 mNm, and high values are not used. Therefore, three-axis attitude control of a small satellite is possible using a reaction wheel, but this method is not suitable for missions that require rapid attitude control at a specific time. As a technology to overcome the small torque value of the reaction wheel, the control moment gyro (CMG) is currently in wide use as a rapid attitude-control actuator in space satellites. The CMG has an internal gimbal mounted at a right angle to the rotation motor and generates a large torque value. In general, when the gimbal operates, a torque value approximately 100 times greater is generated, making it suitable for rapid posture maneuvering. Currently, we are developing a technology for mounting a controlled moment gyro on a small satellite, and here we share the development status of an 800 mNm CMG.

• Korean journal of applied entomology
• /
• v.48 no.2
• /
• pp.123-158
• /
• 2009

An attempt was made to stimulate future research by providing exemplary information, which would integrate published knowledge to solve specific pest problem caused by resistance. This review was directed to find a way for delaying resistance development with consideration of chemical(s) nature, of mixture, rotation, or mosaics, and of insecticide(s) compatible with the biological agents in integrated pest management (IPM). The application frequency, related to the resistance development, was influenced by insecticide activity from potentiation, residual period, and the vulnerability to resistance development of chemical, with secondary pest. Chemical affected feeding, locomotion, flight, mating, and predator avoidance. Insecticides with negative cross-resistance by the difference of target sites and mode of action would be adapted to mixture, rotation and mosaic. Mixtures for delaying resistance depend on each component killing very high percentage of the insects, considering allele dominance, cross-resistance, and immigration and fitness disadvantage. Potential disadvantages associated with mixtures include disruption of biological control, resistance in secondary pests, selecting very resistant population, and extending cross-resistance range. The rotation would use insecticides in high and low doses, or with different metabolic mechanisms. Mosaic apply insecticides to the different sectors of a grid for highly mobile insects, spray unrelated insecticides to sedentary aphids in different areas, or mix plots of insecticide-treated and untreated rows. On the evolution of pest resistance, selectivity and resistance of parasitoids and predator decreased the number of generations in which pesticide treatment is required and they could be complementary to refuges from pesticides To enhance the viability of parasitoids, the terms on the insecticides selectivity and factors affecting to the selectivity in field were examined. For establishment of resistant parasitoid, migration, survivorship, refuge, alternative pesticides were considered. To use parasitoids under the pressure of pesticides, resistant or tolerant parasitoids were tested, collected, and/or selected. A parasitoid parasitized more successfully in the susceptible host than the resistant. Factors affecting to selective toxicity of predator are mixing mineral oil, application method, insecticide contaminated prey, trait of individual insecticide, sub-lethal doses, and the developmental stage of predators. To improve the predator/prey ratio in field, application time, method, and formulation of pesticide, reducing dose rate, using mulches and weeds, multicropping and managing of surroundings are suggested. Plant resistance, predator activity, selective insect growth regulator, and alternative prey positively contributed to the increase of the ratio. Using selective insecticides or insecticide resistant predator controlled its phytophagous prey mites, kept them below an economic level, increased yield, and reduced the spray number and fruits damaged.

• Journal of Korean Academy of Nursing
• /
• v.18 no.1
• /
• pp.5-18
• /
• 1988

Herzberg and his associates concluded from their findings that job satisfaction consisted on two independent dimension ; the first dimension was related to job satisfaction, the second to job dissatisfaction. According to the Herzberg theory, the satisfiers are related to the nature of the work itself and the rewards that flow directly from the performance of that work. The dissatisfaction factors are associated with the individual's relation to the context or environment in which he works. The purpose of this study was to investigate selected factors which result in job satisfaction / dissatisfaction of nurses employed in general hospital. In a study of this nature, it is important that the population be as homogenous as possible in order to reduce the effects of the different environments and backgrounds on job satisfaction. A job satisfaction questionnaire developed by Slabitt et als. was used for this study. It contains 45 statements and utilizes a Likert type scale of 5. Participants were asked to select response which were congruent with their perceptions of the item. It was decided to conduct the study in one general hospital in Seoul. A sample of 505 clinical nurses were selected to participate in this study. The results of this study were as follows ; 1. The overall mean score for the 45 five-point scales of job satisfaction items was 2.945, showing that the subjects of this study were neither satisfied nor dissatisfied. 2. To identify the specific job related factors that result in Job satisfaction / dissatisfaction, the 45 items of job satisfaction were divided into 6 areas and the mean scores and % of agreement were compared. The specific job related factor that resulted in job satisfaction was the job status and those that resulted in job dissatisfaction were salaries, task requirements and organization requirements. But the areas of autonomy and interaction did not belong to either side of the specific job related factors. 3. To identify the relationship between the job satisfaction and the subject's general characteristic, data was analyzed using the t-test and the Pearson correlation coefficient. It was found that the relationship between the job satisfaction and the request for rotation and intention to remain on the job were statistically significant at .05 level, but the relationship between the job satisfaction and age, work experience, and educational background were nor statistically significant at the .05 level.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.1
• /
• pp.5-14
• /
• 2003

Principles of a novel pulse growing method are described. The method realized in the crystal growing on a seed from melts under raw melt feeding provided a more reliable control of the crystallization process when producing large alkali halide crystals. The slow natural convection of the melt in the crucible at a constant melt level is intensified by rotating the crucible, while the crystal rotation favors a more symmetrical distribution of thermal stresses over the crystal cross-section. Optimum rotation parameters for the crucible and crystal have been determined. The spatial position oi the solid/liquid phase interface relatively to the melt surface, heaters and the crucible elements are considered. Basing on that consideration, a novel criterion is stated, that is, the immersion extent of the crystallization front (CF) convex toward the melt. When the crystal grows at a <> CF immersion, the raised CF may tear off from the melt partially or completely due to its weight. This results in avoid formation in the crystal. Experimental data on the radial crystal growth speed are discussed. This speed defines the formation of a gas phase layer at the crystal surface. The layer thickness il a function of time a temperature at specific values of pressure in the furnace and the free melt surface dimensions in the gap between the crystal and crucible wall. Analytical expressions have been derived for the impurity component mass transfer at the steady-state growth stage describing two independent processes, the impurity mass transfer along the <> path and its transit along the <> one. The heater (and thus the melt) temperature variation is inherent in any control system. It has been shown that when random temperature changes occur causing its lowering at a rate exceeding $0.5^{\circ}C/min$, a kind of the CF decoration by foreign impurities or by gas bubbles takes place. Short-term temperature changes at one heater or both result in local (i.e., at the front) redistribution of the preset axial growth speed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.192-199
• /
• 2020

The blower erosion phenomenon was investigated to develop a long-life blower with a volume flow rate of 10,000 ㎥/min with the required total pressure efficiency of 83% or more. The blower performance and blower erosion were predicted through numerical analysis by computational fluid dynamics(CFD). The conditions used for numerical analysis were an air volume of 16,200 ㎥/min, a rotation speed of 893 rpm, and a temperature of 330℃. The specific gravity, particle size, and amount of the dust was 3.15, 90 ㎛~212 ㎛, and is 265 kg/min, respectively. To examine the effects of a dust deflector on erosion, erosion analysis was performed by comparing the models with and without a dust deflector. Numerical analysis showed that when the dust deflector is installed, the average tended to decrease by 167% in the impeller and 133% in the boss. CFD using the Finne's model for erosion revealed a parallel restitution coefficient of 1 and a perpendicular restitution coefficient of 0.1. The blower performance of case 5 was 691.7 mmAq, and the efficiency was 83.3% when the rotation speed and the air volume flow rate were 880 rpm and 16,200 ㎥/min, respectively.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.21 no.2
• /
• pp.367-375
• /
• 1991

The clinical and radiographic features of 1,171 mesiodenses were studied with periapical radiograms and/or pantomograms in 942 persons visited the Department of Oral Radiology, School of Dentistry, Kyung Hee University during January 1980 to December 1989. The obrained results were as follows; 1. The incidence of mesiodens was higher in males (75.4%) than in females (24.6%). 2. In number of mesiodenses per individual, a single mesiodens was found to be 75.9%, 2-mesiodenses to be 23.8%, and 3-mesiodenses to be 0.2%. 3. In mesiodenses according to erupted and impacted status, the erupted mesiodens was found to be 16.5%, the impacted mesiodens in the interdental alveolar bone to be 66.6%, and in the region below root apex to be 16.9%. 4. In impacted mesiodenses according to direction of tooth crown, the inverted impaction was found to be 68.8%, the vertical impaction to be 15.1%, and the angulated impaction to be 16.1%. Among the impacted mesiodenses, a palatally located impaction was 87.5%, a middle 4.9%, and a labially 7.6%. 5. In mesiodenses according to shape of the tooth crown, a incisor-like type was found to be 1.6%, a canine-like type to be 6.8%, a conical type to be 79.2%, and a tuberculated type to e 12.4%. 6. In effect of mesiodens on adjacent tooth, non-specific influences were found to be 73.4%, crowding to be 0.3%, diastema to be 11.8%, rotation to be 5.7%, delayed eruption to be 3.8%, root resorption to be 2.6%, and dentigerous cyst to be 2.4%.