• Journal of Biosystems Engineering
• /
• v.24 no.3
• /
• pp.195-208
• /
• 1999

A computer simulation was carried out to investigate draft characteristics of Korean paddy field for obtaining the basic reference to the selection of optimum moldboard type suitable for Korean paddy field conditions. Cylindrical, cylindroidal, semihelical moldboard plows, and one type of oriental Janggi were used for simulation. A series of soil bin experiments was conducted to compare the experimental results with the predicted drafts from computer simulation using the cylindroidal moldboard plow. The computer model predicted draft force with 1~12% error at 12~16cm plowing depth which is the most conventional plowing depth in the rural area in Korea. Thus, the computer model was considered to be good enough for simulation. Due to the different plowing width of experimental plows, specific draft was selected for comparison by computer simulations. Specific draft of cylindrical moldboard plow was ranged from 3 to 6 N/$\textrm{cm}^2$ according to the soil conditions, plowing speed and plowing depth, 2.5~3.0 N/$\textrm{cm}^2$ for semihelical moldboard plow.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.12 no.3
• /
• pp.2035-2042
• /
• 1970

Korean Janggi and Western plow to have developed for a long time in the east and west were tested and compared in their draft resistance. The charaderistic of Korean Janggi and plow to be able to make deep plowing, on of the most important factors influeneed the increased yield, were ofserved. The study was undertaken to obtain these basic factors' to device and construct the deep plowing Janggi. The results were as follow; 1. The draft resistance of Korean Janggi far less than that of plow and on the dry field, the influence of soil moisture contant to the draft resistance was larger in the Korean Janggi than in the western plow, but on the rice paddy, there was not differences between them. 2. The plow was more stable than that of Janggi in their operation. 3. The relation ship between the specific draft resistance and plowing depth was shown bygthe carved equation. $$K=Ax+\frac{B}{x}+C$$(K ; specific draft restance, x; plowing depth) A, B, C; Constant controled by soil and instrument factor) 4. Minimam values of the specific draft resistance were as follow; a. On the dry field; Korean Janggi; x = $8{\sim}14cm$ $4K=280{\sim}330gr/cm^2$$ Westean plow; x=$10{\sim}12cm$ $$K=480{\sim}490gr/cm^2$$ 6. On the rice paddy; Korean Janggi; x=$8{\sim}12cm$ $$K=255{\sim}280gr/cm^2$ Western plow; x=$7{\sim}10cm$ $$K=415{\sim}420grc/m^2$$

• Plant Journal
• /
• v.8 no.4
• /
• pp.34-39
• /
• 2012

This study presents how low quality coal combustion affects the desulfurizer draft system by correlating of draft loss in a coal-fired thermal power plant and predicts the stall occurrence time of a booster fan. In case of low quality coal, a lot of coal is needed to generate equivalent output power, thereby the rating of increasing draft loss was faster than designed amount of coal. We surely confirmed that draft loss affects the specific energy of a booster fan strongly. On this basis, it is possible to predict the occurring time of stall for a booster fan from current operation specific energy to stall limit specific energy. This study suggests increasing speed of draft loss in each caloric value and the impact of specific energy at a booster fan, it expects to help safe operating in a thermal power plant.

• The Plant Pathology Journal
• /
• v.31 no.3
• /
• pp.212-218
• /
• 2015

In this study, we developed a species-specific PCR assay for rapid and accurate detection of three Xanthomonas species, X. axonopodis pv. poinsettiicola (XAP), X. hyacinthi (XH) and X. campestris pv. zantedeschiae (XCZ), based on their draft genome sequences. XAP, XH and XCZ genomes consist of single chromosomes that contain 5,221, 4,395 and 7,986 protein coding genes, respectively. Species-specific primers were designed from variable regions of the draft genome sequence data and assessed by a PCR-based detection method. These primers were also tested for specificity against 17 allied Xanthomonas species as well as against the host DNA and the microbial community of the host surface. Three primer sets were found to be very specific and no amplification product was obtained with the host DNA and the microbial community of the host surface. In addition, a detection limit of $1pg/{\mu}l$ per PCR reaction was detected when these primer sets were used to amplify corresponding bacterial DNAs. Therefore, these primer sets and the developed species-specific PCR assay represent a valuable, sensitive, and rapid diagnostic tool that can be used to detect three specific pathogens at early stages of infection and may help control diseases.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.20
• /
• pp.387-421
• /
• 2003

On the above, a comparison between preliminary draft conventions and comments by the Int'l Chamber of Commerce, contents of preliminary draft convention, problems and alternative are discussed. The conclusions are as follows thereof : The laws of MLEC and MLES made preparation for electronic era of CISG. But electronic circumstances are more changed than the time of regulation of them. Therefore the business world needs a stand-alone convention dealing broadly with the issues of contract formation in electronic commerce. At last, preliminary draft convention delivered a second round. But the base of the instrument was also MLEC and MLES. The revised preliminary draft convention is much amended beyond preliminary draft convention. At its forty-one sessions, the working group reviewed articles 1-11 of the revised preliminary draft convention presented by the secretariat. The remainder was pending until the time of its forty-two sessions. Therefore, on the base of deliberations and decisions of that sessions and them of thirty-six sessions of UNCITRAL, which will be held on comming november, the draft convention which will be prepared by the secretariate, be re-revised preliminary draft convention. According to review of working group on them, preliminary draft convention will officially be draft convention or revise by secretariate. Under these situations, my points of view on draft convention are as follows : As though e-UCP is used carring out side by side with UCP, after e-CISG making in order to adjust CISG to "on" transaction, it is very easy and prompt for business worked to use CISG with e-CISG. This will facilitate ratification of the CISG. For this case, I already presented contents of e-CISG. It is very important for the preliminary draft convention to deal specially with issues related to electronic contracting or to electronic transaction, because according to which way, its contents and scope of application will be different. But the revised draft convention is regretably compromising both them. Consequently, its contents are very confusing and we could not expect its success. If e-CISG will regulate, it is desirable that, if possible, working group has to make the general rule, and the making of useful, practical, affordable rule for electronic commerce, for example Uniform Customs and Practices for Electronic Commerce(e-UEC) in order to solve the specific practical problems, if any, which business currently faces regarding electronic contracting, has to entrust ICC. If working group want to make e-CISG, it is important not to hesitate and take a significant amount of time.

• Fibers and Polymers
• /
• v.7 no.1
• /
• pp.62-65
• /
• 2006

Making a good model is one of the most important aspects in the field of a control system. If one makes a good model, one is now ready to make a good controller for the system. The focus of this thesis lies on system modeling, the draft system in specific. In modeling for a draft system, one of the most common methods is the 'least-square method'; however, this method can only be applied to linear systems. For this reason, the draft system, which is non-linear and a time-varying system, needs a new method. This thesis proposes a new method (the MLS method) and demonstrates a possible way of modeling even though a system has input noise and system noise. This thesis proved the adaptability and convergence of the MLS method.

• International Journal of Fluid Machinery and Systems
• /
• v.2 no.2
• /
• pp.102-109
• /
• 2009

A design optimization system for Francis turbine was developed. The system consists of design program and CFD solver. Flow passage shapes are optimized automatically by using the system with Multi-Objective Genetic Algorithm (MOGA). In this study, the system was applied to a high specific speed Francis turbine (nSP = 250m-kW). The runner profile and the draft tube shape were optimized to decrease hydraulic losses. As the results, it was shown that the turbine efficiency was improved in wide operating range, furthermore, the height of draft tube was reduced with the hydraulic performance kept.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.4 no.2
• /
• pp.119-128
• /
• 1975

Natural draft and flow which low temperature moist gas produces in the chimney of an Ondol heating system were numerically analysed. Among several factors involved inlet gas temperature has the strongest influence on the chimney performance and then next specific humidity of the gas. Thermal conductivity of the chimney wall, however, has little influence on the performance of such a low temperature chimney. Under given flow conditions there exists an optimum chimney height which gives a maximum flow rate for a given chimney diameter. This optimum value of chimney height inereases with increase in chimney diameter, inlet gas temperature and specific humidity.

• Journal of Power System Engineering
• /
• v.14 no.5
• /
• pp.30-35
• /
• 2010

Recently, the large capacity draft fans in power plants had been changed to variable speed type to educe the power consumption. But the fan experienced the unexpected vibration at specific speed regions. In this study, the high vibration frequency of the fan was confirmed and the natural frequency of the rotor were measured and analyzed by FEM programs. It was analyzed that the vibration was caused by the resonance at the frequency, 30.7Hz. So, the rotor vibration characteristic was changed by adjusting the distance between the shaft bearings. It was conformed the high vibration was disappeared over the all operation speeds.

• International Journal of Fluid Machinery and Systems
• /
• v.2 no.4
• /
• pp.392-399
• /
• 2009

The paper concerns the description of the step by step development process of the new fixed blade runner called "Mixer" suitable for the uprating of the Francis turbines units installed at the older low head hydropower plants. In the paper the details of hydraulic and mechanical design are presented. Since the rotational speed of the new runner is significantly higher then the rotational speed of the original Francis one, the direct coupling of the turbine to the generator can be applied. The maximum efficiency at prescribed operational point was reached by the geometry optimization of two most important components. In the first step the optimization of the draft tube geometry was carried out. The condition for the draft tube geometry optimization was to design the new geometry of the draft tube within the original bad draft tube shape without any extensive civil works. The runner blade geometry optimization was carried out on the runner coupled with the draft tube domain. The blade geometry of the runner was optimized using automatic direct search optimization procedure. The method used for the objective function minimum search is a kind of the Nelder-Mead simplex method. The objective function concerns efficiency, required net head and cavitation features. After successful hydraulic design the modal and stress analysis was carried out on the prototype scale runner. The static pressure distribution from flow simulation was used as a load condition. The modal analysis in air and in water was carried out and the results were compared. The final runner was manufactured in model scale and it is going to be tested in hydraulic laboratory. Since the turbine with the fixed blade runner does not allow double regulation like in case of full Kaplan turbine, it can be profitably used mainly at power plants with smaller changes of operational conditions or in case with more units installed. The advantages are simple manufacturing, installation and therefore lower expenses and short delivery time for turbine uprating.