• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2835-2838
• /
• 2003

We study the characteristics of oscillating in non-autonomous condition and the conducted noise generation in a RL-photocoupler circuit. This circuit may be shown a period-doubling and a chaos dynamics under any specific conditions of input circuit. But, the relationship between input signals and output signals is different according to the amplitude of driving input voltage. Then, the oscillation noise was analyzed with respect to both the frequency and the amplitude of an external ac signal and do values. The results show that the noise-induced oscillations for falling and rising cycles induced by kick-back effect in an inductor, nonlinear capacitance, nonlinear resistance and charge storage time in a diode and an LED. We also compared the simulation with the experimental results.

• Journal of Electrochemical Science and Technology
• /
• v.6 no.3
• /
• pp.81-87
• /
• 2015

This study introduces a facile strategy to prepare metal oxide/conducting polymer nanocomposites that may have promising applications in energy storage devices. Ploy aniline/nano wire manganese dioxide (PANI/NwMnO₂) was synthesized by cyclic voltammetry on glassy carbon electrode. Morphology and structure of the composite, pure PANI, MnO₂ nanowires were fully characterized using XRD and SEM analysis. Electrochemical studies shows excellent synergistic effect between PANI and MnO₂ nanowires which results in its capacitance increase and cycle stability against PANI electrode. Specific capacitances of PANI/NwMnO₂ and PANI were 456 and 190 F/g respectively. The electrochemical performance of electrodes studied using cyclic voltammetry, Galvanostatic charge/discharge and impedance spectroscopy.

• Journal of Electrochemical Science and Technology
• /
• v.3 no.3
• /
• pp.143-148
• /
• 2012

The unique effects of highly conductive conducting polymer/SWNT (single walled carbon nanotube) composite nanoparticles in electric double layer capacitors are studied for the enhancement of the adhesive properties, specific capacitance and power characteristics of the electrode. Because the conducting polymer/SWNT composite material, which is believed to act as a polymer binder, an active material for charge storage and a conducting agent, is well distributed on the activated carbon, greatly enhanced adhesion properties, cell capacitance and power characteristics were obtained.

• Korean System Dynamics Review
• /
• v.8 no.1
• /
• pp.49-66
• /
• 2007

Due to criminal aspects spreading nation wide, their intelligence level increasing and becoming digitalized, the citizens' interest in and desire for crime security have increased. Until now, the preceding researches have been focused on finding the specific variables that have direct effects on the demand for police manpower through regression analysis and attempted to predict number of needs. However, there have never been any researches producing the accurate number of demands for crimes and human resources needed for each work load. Therefore, this research have analyzed each police station functions by interviewing the persons in charge and selected the main duty for each functions. From this, by using the method of system dynamics, this research was able to predict the standard number of manpower needed for each police station functions. Also, by making a model for each 235 police stations, the best efficient employment plan for police stations and district agencies have been further discussed based on the computer simulation results.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.1
• /
• pp.65-69
• /
• 2010

Supercapacitors as novel energy storage devices between conventional capacitors and batteries, with more specific capacitance and energy densities than conventional capacitors and more power densities than batteries are to be used in many fields. And, social demand on fuel economy and reducing pollution needs equipment of new function such as energy storage system with good power performance, high cyclability and good energy efficiency. Supercapacitor is regarded as one of good alternatives for meeting the requirement of market with excellent power performance and high cyclability. This paper deals with the fundamental characteristics of supercapacitor unit and charge and discharge behavior of supercapacitor module for developing 42V hybrid energy storage system with lead acid battery and supercapacitor in order to adopt to 42V power net for vehicle.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2001.12a
• /
• pp.242-246
• /
• 2001

본 논문은 유전자알고리즘과 영상처리기법을 이용해 특정 대상물의 절단위치를 추출하는 방법을 제시한 것으로서, 최근에는 기존의 아날로그 센서를 사용하여 단지 대상의 명암으로 물체를 구분한 대신에 CCD(Charge-Couple Device)카메라로부터 얻어진 화상 데이터를 이용해 물체의 정보를 추출해 이용하는 방법이 많이 응용되고 있고, 영상의 형태학, 지식기반의 영상 해석 시스템에 대한 관심이 많이 높아 졌다. 그리고 지금에는 거의 모든 분야에서 화상처리기법들이 사용되어지고 있다. 따라서 본 논문에서는 실시간 그레이 레벨의 입력 화상에 대하여 특정 물체의 특정위치를 유전 알고리즘과 영상처리기법을 이용해 검출 방법을 제안하고, 실제의 시스템에 적용한 예를 제시하려고 한다.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.64 no.4
• /
• pp.273-276
• /
• 2015

In this paper, ESS capacity installed in industrial customer is calculated using economic analysis. To do this, electric charge for industrial customer is analyzed and power management system(PMS) of ESS is selected. Reduction of kW cost and kWh cost are set to 'benefit' according to operation of ESS. Also, installation cost and maintenance cost of ESS are set to 'cost'. Proper ESS capacity is determined as a result of benefit-to-cost(B/C) analysis according to the variation of ESS installation cost. In case study, B/C is analyzed for the specific industrial customer and minimum capacity of ESS to make a profit are proposed for the customer.

• Journal of Korean Society for Quality Management
• /
• v.27 no.4
• /
• pp.241-255
• /
• 1999

This paper concerns Reliability Analysis System(RAS) developed by LG Electronics, Inc. for collecting, classifying, and analyzing field failure data. To develop this system, a database for the management of field failure data was built and several functions were included to analyze and assess the product reliability. Nonparametric estimation and cumulative hazard plotting techniques were applied to estimate the reliability for a specific period. This system serves not only engineers in charge of quality but also designers who wish to monitor the reliability of their own products.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.95.1-95.1
• /
• 2011

In this work, graphene was prepared by modified Hummers method and prepared graphene was applied to electrode materials for supercapacitor. In addition, to enhance the electrochemical performance of graphene, carbon black was deposited onto graphene via chemical reduction. The effect of the carbon black content incorporated on the electrochemical properties of the graphene-based electrodes was investigated. It was found that nano-scaled carbon black aggregates were deposited and dispersed onto the graphene by the chemical reduction of acid treated carbon black and graphite oxide. From the cyclic voltammograms, carbon black-deposited graphene (CB-GR) showed improved electrochemical performance, i.e., current density, quicker response, and better specific capacitance than that of pristine graphene. This indicates that the carbon black deposited onto graphene served as an conductive materials between graphene layers, leading to reducing the contact resistance of graphene and resulted in the increase of the charge transfer between graphene layers by bridge effect.

• Korean Journal of Optics and Photonics
• /
• v.15 no.1
• /
• pp.51-55
• /
• 2004

Surface plasmons (SPs) are charge density oscillations that propagate along an interface between a dielectric and metal. In this paper, the electric field of SPs and the intereference of two SPs are observed by using Near-field Scanning Optical Microscope (NSOM). The excitation condition of SPs is changed as the optical tip approaches the metal surface, because the excitation condition of SPs is very sensitive to surface structures. To measure the microscope field of SPs, the distance between metal surface and optical tip must contain a specific interval.