• Clean Technology
• /
• v.24 no.1
• /
• pp.9-14
• /
• 2018

In this study, Material life cycle evaluation was performed to analyze the environmental impact characteristics of TiN-Zr membrane manufacturing process. The software of MLCA was Gabi. Through this, environmental impact assessment was performed for each process. Transition metal nitrides have been researched extensively because of their properties. Among these, TiN has the most attention. TiN is a ceramic materials which possess the good combination of physical and chemical properties, such as high melting point, high hardness, and relatively low specific gravity, high wear resistance and high corrosion resistance. With these properties, TiN plays an important role in functional materials for application in separation hydrogen from fossil fuel. Precursor TiN was synthesized by sol-gel method and zirconium was coated by ball mill method. The metallurgical, physical and thermodynamic characteristics of the membranes were analyzed by using Scanning Electron Microscope (SEM), Energy Dispersive X-ray (EDS), X-ray Diffraction (XRD), Thermo Gravimetry/Differential Thermal Analysis (TG/DTA), Brunauer, Emmett, Teller (BET) and Gas Chromatograph System (GP). As a result of characterization and normalization, environmental impacts were 94% in MAETP (Marine Aquatic Ecotoxicity), 2% FAETP (Freshwater Aquatic Ecotoxicity), 2% HTP (Human Toxicity Potential). TiN fabrication process appears to have a direct or indirect impact on the human body. It is believed that the greatest impact that HTP can have on human is the carcinogenic properties. This shows that electricity use has a great influence on ecosystem impact. TiN-Zr was analyzed in Eco-Indicator '99 (EI99) and CML 2001 methodology.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.6 s.165
• /
• pp.879-891
• /
• 2007

Forecasting is a critical task for fashion companies because of continuous change in fashion and long process lead-time. Therefore, it is of great importance for both scholars and companies to understand how forecasted fashion styles are accepted by consumers. This research aimed to investigate consumer acceptance of fashion styles in Korea. The study examined and compared oversea collections of women's wear to the street fashion in Korea for seven seasons from 02 s/s to 05 s/s. Information on oversea collections were obtained from the magazine, Fashion Show, and the street fashion information from Seoul Fashion Design Center. The results showed that overall trends presented in oversea collections have been well accepted, while acceptance of specific styles or items varied. During the period of this research, sporty style and feminine style were very strong in the street fashion. Many styles and items were modified and selectively accepted probably because of cultural differences and limitations of mass production. Some styles which were presented in oversea collections were not accepted in Korea, and at the same time some cases were observed only in the street fashion in Korea. The results of this study provide guidelines for Korean apparel companies in merchandise planning and empirical findings to deepen the understanding on Korean society with respect to fashion.

• Journal of Internet Computing and Services
• /
• v.13 no.4
• /
• pp.23-31
• /
• 2012

Nowadays, recognizing human activities is an important subject; it is exploited widely and applied to many fields in real-life, especially in health care and context aware application. Research achievements are mainly focused on activities of daily living which are useful for suggesting advises to health care applications. Falling event is one of the biggest risks to the health and well-being of the elderly especially in independent living because falling accidents may be caused from heart attack. Recognizing this activity still remains in difficult research area. Many systems equipped wearable sensors have been proposed but they are not useful if users forget to wear the clothes or lack ability to adapt themselves to mobile systems without specific wearable sensors. In this paper, we develop a novel method based on analyzing the change of acceleration, orientation when the fall occurs and measure their similarity to featured fall patterns. In this study, we recruit five volunteers in our experiment including various fall categories. The results are effective for recognizing fall activity. Our system is implemented on G1 smart phone which are already plugged accelerometer and orientation sensors. The popular phone is used to get data from accelerometer and results showthe feasibility of our method and significant contribution to fall detection.

• Journal of Digital Convergence
• /
• v.19 no.2
• /
• pp.357-363
• /
• 2021

In general, people choose clothes to wear when they go out, referring to real-time weather and temperature. However, it is difficult for an individual to use real-time weather information and his or her temperature sensitivity information to choose the right clothes from among the clothes he or she owns. Existing clothing recommendation systems developed to help with these problems have problems recommending clothes that are not clearly set in the clothing category and are not in the possession of the user. In addition, user-specific temperature sensitivity is not taken into account, resulting in inappropriate clothing recommendations for users. To solve these problems, this study developed a system that determines and registers clothing categories for the clothing owned by the user, and recommends customized clothing for each user by considering temperature sensitivity and real-time weather information. In the case of weather information, not only weather information such as temperature and wind direction, but also clothes based on temperature sensitivity were recommended based on the calculation of temperature sensitivities. A satisfaction survey of 65 university students was conducted to assess the system. As a result, 80% of the respondents were satisfied with the recommended clothing, indicating that the satisfaction of the system was good. Therefore, it is expected that this system will be highly utilized in real life as it will be recommended based on clothes owned by individuals, reflecting individual temperature sensitivity.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.3
• /
• pp.211-219
• /
• 2021

Chinese Tibetan Opera is a highly comprehensive drama type, which combines the educational aesthetic characteristics of the realism of Western drama and the freehand of Chinese opera, including mask play, square play, ritual play and religious play. Tibetan opera, as a kind of local drama, has high research value, which is determined by its educational aesthetic characteristics. The world's three major dramas include Sanskrit dramas in India, tragic-comedies in ancient Greece and Chinese dramas, which have different forms of expression and educational aesthetic characteristics. Because of the particularity of its birthplace, Tibetan Opera inherits some of the three forms of the above three dramas. Ancient Greek tragedies originate from the sacrificial ritual of the god of wine. In the early ceremonial action performances, the actors were all men and needed to wear masks to perform. In Tibetan opera, men also play a role in masks, which are originated from the folk totem dance and religious pantomime music and dance. Due to the long history of Indian Sanskrit drama, except for the relevant records in dance theory, the specific performance form can not be verified. However, according to the relevant records in dance theory, the three characters "Wenba", "Jialu" and "Lamu" in the opening play of Tibetan opera are similar to the "concept character play" in Sanskrit opera. Tibetan Opera is a very important part of traditional Chinese opera, which inherits the educational aesthetic characteristics of Chinese opera.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.5
• /
• pp.387-401
• /
• 2023

The Earth Pressure Balanced (EPB) Shield Tunnel Boring Machine (TBM) is widely employed for constructing urban underground spaces due to its minimal vibration and low noise levels. The injection of additives offers several advantages, including maintaining shield chamber pressure, reducing shear strength, minimizing cutter wear, and decreasing the permeability of the excavated soil. This technique is known as soil conditioning and involves the application of additives such as foam, polymer, and bentonite slurry. In this study, weathered granite soil commonly encountered at domestic tunnel sites was used as a soil specimen. Foam and polymer were applied as additives to assess the rheological properties of conditioned soils. The workability was evaluated through slump tests, while the rheological properties were assessed through laboratory pressurized vane shear tests conducted under the same conditions. Specially, the polymer was applied under specific conditions with low workability with high slump values, with the aim of evaluating the impact of polymer application. The test results revealed that with an increase in the Foam Injection Ratio (FIR), the slump value also increased, while the torque, peak strength, yield stress, apparent viscosity, and thixotropic area decreased. Conversely, an increase in the Polymer Injection Ratio (PIR) led to results opposite to those of FIR. Additionally, a correlation between the slump value and yield stress was proposed. When comparing conditions with only foam applied to those with both foam and polymer applied, even with similar slump values, the yield stress was found to be lower in the latter conditions.

• Journal of Ecology and Environment
• /
• v.48 no.1
• /
• pp.17-23
• /
• 2024

Background: Honey bees play a crucial role in pollination and ecological balance. Apis mellifera L. colonies, especially those located in specific geographic regions, such as the palm garden in Eastern Thailand, are susceptible to potential threats from microbial contaminants. Understanding and detecting microbial organisms in these beehives is essential for the preservation of bee health, honey production, and the broader ecosystem. However, the problem of microbial infection and antibiotic-resistant bacteria is more severe and continuously increasing, resulting in a health, economic, and social crisis. The purpose of this study is to determine the prevalence of microorganisms in A. mellifera beehives in palm gardens in Rayong province, Eastern Thailand. Results: Ten swabs in transport media were swabbed and obtained from different parts of each beehive (1 swab per beehive), for a total of 10 hives. Traditional microbial culture-based methods, biochemical tests, and antimicrobial susceptibility (disc-diffusion) tests were used to detect microbial organisms and antibiotic resistance in bacteria. The swab tests from nine beehives resulted in the detection of Gram-positive bacteria (63.64%), Gram-negative bacteria (27.27%), and fungi/yeast (9.09%). These microorganisms are classified as a group of coagulase-negative Staphylococcus spp. and made up 40.91% of the bacteria discovered. Other bacteria found were Coryneform bacteria (13.64%), Pantoea spp. (13.64%), Bacillus spp. (9.09%), yeast (9.09%), glucose non-fermentative Gram-negative bacilli (9.09%), and Pseudomonas spp. (4.55%). However, due to the traditional culture-based and 0biochemical tests usually used to identify the microbial organisms in clinical specimens and the limitation of identifying some environmental microbial species, the results of the antimicrobial susceptibility test cannot reveal if the organism is resistant or susceptible to the drug. Nevertheless, drug-sensitive inhibition zones were formed with each antibiotic agent. Conclusions: Overall, the study supports prevention, healthcare, and public health systems. The contamination of microorganisms in the beehives may affect the quality of honey and other bee products or even the health of the beekeeper. To avoid this kind of contamination, it is therefore necessary to wear personal protective equipment while harvesting honey and other bee products.

• Journal of Intelligence and Information Systems
• /
• v.17 no.4
• /
• pp.143-155
• /
• 2011

Lately electronic tagging policy for the sexual offenders was introduced in order to reduce and prevent sexual offences. However, most sexual offences against children happening these days are committed by the tagged offenders whose identities have been released. So, for the crime prevention, we need measures with which we could minimize the suffers more promptly and actively. This paper suggests a new system to relieve the sexual abuse related anxiety of the children and solve the problems that electronic bracelet has. Existing bracelets are only worn by serious criminals, and it's only for risk management and positioning, there is no way to protect the children who are the potential victims of sexual abuse and there actually happened some cases. So we suggest also letting the students(children) wear the LBS(Location Based Service) and USN(Ubiquitous Sensor Network) technology based electronic bracelets to monitor and figure out dangerous situations intelligently, so that we could prevent sexual offences against children beforehand, and while a crime is happening, we could judge the situation of the crime intelligently and take swift action to minimize the suffer. And by checking students' attendance and position, guardians could know where their children are in real time and could protect the children from not only sexual offences but also violent crimes against children like kidnapping. The overall system is like follows : RFID Tag for children monitors the approach of offenders. While an offender's RFID tag is approaching, it will transmit the situation and position as the first warning message to the control center and the guardians. When the offender is going far away, it turns to monitoring mode, and if the tag of the child or the offender is taken off or the child and offender stay at one position for 3~5 minutes or longer, then it will consider this as a dangerous situation, then transmit the emergency situations and position as the second warning message to the control center and the guardians, and ask for the dispatch of police to prevent the crime at the initial stage. The RFID module of criminals' electronic bracelets is RFID TAG, and the RFID module for the children is RFID receiver(reader), so wherever the offenders are, if an offender is at a place within 20m from a child, RFID module for children will transmit the situation every certain periods to the control center by the automatic response of the receiver. As for the positioning module, outdoors GPS or mobile communications module(CELL module)is used and UWB, WI-FI based module is used indoors. The sensor is set under the purpose of making it possible to measure the position coordinates even indoors, so that one could send his real time situation and position to the server of central control center. By using the RFID electronic roll book system of educational institutions and safety system installed at home, children's position and situation can be checked. When the child leaves for school, attendance can be checked through the electronic roll book, and when school is over the information is sent to the guardians. And using RFID access control turnstiles installed at the apartment or entrance of the house, the arrival of the children could be checked and the information is transmitted to the guardians. If the student is absent or didn't arrive at home, the information of the child is sent to the central control center from the electronic roll book or access control turnstiles, and look for the position of the child's electronic bracelet using GPS or mobile communications module, then send the information to the guardians and teacher so that they could report to the police immediately if necessary. Central management and control system is built under the purpose of monitoring dangerous situations and guardians' checking. It saves the warning and pattern data to figure out the areas with dangerous situation, and could help introduce crime prevention systems like CCTV with the highest priority. And by DB establishment personal data could be saved, the frequency of first and second warnings made, the terminal ID of the specific child and offender, warning made position, situation (like approaching, taken off of the electronic bracelet, same position for a certain time) and so on could be recorded, and the data is going to be used for preventing crimes. Even though we've already introduced electronic tagging to prevent recurrence of child sexual offences, but the crimes continuously occur. So I suggest this system to prevent crimes beforehand concerning the children's safety. If we make electronic bracelets easy to use and carry, and set the price reasonably so that many children can use, then lots of criminals could be prevented and we can protect the children easily. By preventing criminals before happening, it is going to be a helpful system for our safe life.