• Composites Research
• /
• 제27권2호
• /
• pp.59-65
• /
• 2014

대부분의 에너지는 전세계적으로 제한되어 있는 석유, 석탄, 천연가스 등 주로 화석연료로부터 얻어지고 있다. 최근, 고유가, 석유자원의 고갈, 기후변화 등이 신재생에너지를 포함한 비화석 연료가 세계적으로 주목을 받고 있는 이유 중의 하나이다. 이 연구에서는 고비강성 및 비강도, 고내부식성 및 내화학성 등을 장점으로 갖고 있는 펄트루젼 FRP(PFRP)를 사용하였다. 따라서 부유식 구조물의 설계와 시공을 위해서는 PFRP 재료가 우선적으로 선택될 수 있다. 추적식 수상 태양광발전 구조물의 설계는 유한요소해석 결과를 사용하여 수행되었으며, 구조물은 조립되어 수상에 설치되었다. 구조물을 설치하기 전에 안전성 문제를 유한요소법을 사용하여 검토하였으며, 그 결과 설계, 제작, 시공된 구조물은 외적으로 작용된 하중을 지지하는데 충분히 안전함을 알 수 있었다.

• Composites Research
• /
• 제33권5호
• /
• pp.288-295
• /
• 2020

섬유강화 복합재 적층판은 높은 비강성과 비강도를 가지고 있으며, 자동차 및 항공과 같은 무게에 민감한 산업에서 경량화에 유용할 것으로 기대되고 있다. 하지만 복합재 적층판의 설계는 적층 개수와 적층 순서를 모두 결정해야 하는 어려움으로 인해 설계자의 축적된 경험과 직관에 의존하는 경우가 많고, 이는 필요 이상으로 제품의 중량이 증가하는 과설계로 이어질 수 있다. 본 연구에서는 주어진 하중을 견디고 최소 무게를 갖는 복합재 적층판의 최적설계를 수행하였다. 나열법을 기반으로, 복합재 적층판의 설계 지침을 만족하는 모든 경우의 적층 조합을 고려하였다. 복합재 적층판을 여러 개의 패널로 나누고, 각 패널의 응력 분포와 인접한 패널 간 연결성을 고려하여 최적의 적층 수와 적층 순서를 결정하였다. 강도를 고려하기 위해 Tsai-Wu 파손 이론으로부터 파손 지수를 최적화하였고, 압축 하중에 대해서는 좌굴 해석을 수행하였다. 적층각은 일반적으로 사용하고 있는 0, ±45, 90°를 사용하였다.

• 대한한의학회지
• /
• 제26권2호
• /
• pp.231-240
• /
• 2005

Objectives: In order to investigate the efficacy and safety of the newly developed herbal medicine Jetongdan, a placebo­controlled, randomized clinical trial of patients with osteoarthritis of the knee was undertaken. Methods: Data were obtained from 80 patients with OA of the knee. After enrollment, they were asked to answer a disease-specific questionnaire (Western Ontario and McMaster Universities (WOMAC) OA index) and analyzed with the erythrocyte sedimentation rate (ESR) in order to evaluate the efficacy of Jetongdan, and analyzed for aspartate transaminase (AST) level, alanine transaminase (ALT) level, blood mea nitrogen (BUN) level, and creatinine (Cr) level in order to evaluate the safety of Jetongdan. Results: The liver function and renal function did not deteriorate after treatment with Jetongdan. Composite WOMAC score and physical function subscale was improved, but pain subscale, stiffness subscale, and ESR were not improved by. This was possibly because the baseline characteristics of the two groups were not homogenized after randomization. Conclusions: Jetongdan could be a promising treatment option for osteoarthritis of the knee. Further study in a larger population with appropriate severity grades is recommended.

• 복합신소재구조학회 논문집
• /
• 제1권3호
• /
• pp.10-16
• /
• 2010

건설분야에서 환경적, 사회적 요구의 변화로 인해 기존의 건설재료와 괸련된 다양한 문제점들을 극복하기 위해 새로운 건설재료가 필요하게 되었다. 따라서, 토목분야에서 토목구조물을 설계할 때 만족시켜야 할 요구조건 또한 다양화 되고 있다. 토목분야의 새로운 건설재료로서 섬유보강플라스틱은 탁월한 부식저항성, 높은 비강도/비강성 등을 갖고 있다. 그러므로 그러한 성질은 기존 건설재료의 사용에 따른 문제점을 완화시키는데 사용할 수 있다. 최근 신규 건설현장에 적용하기 위해 신형식 교각이나 해상파일 등이 연구되고 있으며, 그것들은 보통 섬유보강플라스틱 튜브에 콘크리트를 채우는 형식이다. 이 연구에서 압축 및 휨 강도를 향상시키기 위해 섬유보강플라스틱 튜브에 철근콘크리트를 채운 합성파일을 제안하고 실험과 해석을 바탕으로 하중재하성능에 대하여 검토하였다.

• 복합신소재구조학회 논문집
• /
• 제5권2호
• /
• pp.1-8
• /
• 2014

Fiber reinforced polymeric plastic (FRP) materials have many advantages over conventional structural materials, i.e., high specific strength and stiffness, high corrosion resistance, right weight, etc. Among the various manufacturing methods, pultrusion process is one of the best choices for the mass production of structural plastic members. Since the major reinforcing fibers are placed along the axial direction of the member, this material is usually considered as an orthotropic material. However, pultruded FRP (PFRP) structural members have low modulus of elasticity and are composed of orthotropic thin plate components the members are prone to buckle. Therefore, stability is an important issue in the design of the pultruded FRP structural members. Many researchers have conducted related studies to publish the design method of FRP structures and recently, referred to the previous researches, pre-standard for LRFD of pultruded FRP structures is presented. In this paper, the accuracy and suitability of design equation for the local buckling strength of pultruded FRP I-shape compression members presented by ASCE are estimated. In the estimation, we compared the results obtained by design equation, closed-form solution, and experiments conducted by previous researches.

• 한국의류산업학회지
• /
• 제15권6호
• /
• pp.985-992
• /
• 2013

Polytrimethylene terephthalate(PTT) offers several advantageous properties such as good tensile strength, uniformity, stiffness, toughness, UV stability, resilience, stain resistance, outstanding elastic recovery, and dyeability. The effects of annealing temperature on physical properties and the structure of PTT filaments and yarn were investigated by measuring wide-angle X-ray diffraction (WAXD), density, optical birefringence, dynamic visco elasticity, and tensile testing. The intensity of maximum tan ${\delta}$ decreased and the temperature of maximum tan ${\delta}$ shifted to a higher temperature as the annealing temperature of filaments increased; however, it shifted to a lower temperature when the annealing temperature exceeded $130^{\circ}C$. In addition, crystallinity, density and D-spacing of (010) crystal face increased as the annealing temperature increased. Optical birefringence and specific stress were almost constant up to $100^{\circ}C$ and then decreased above $130^{\circ}C$. The shrinkage of PTT filament is 0 in boiling water when annealed above $130^{\circ}C$; consequently, the use of annealed fiber above $130^{\circ}C$ can remove thermal instability when dyeing PTT fiber. In the case of yarns, the thermal stability and physical properties of yarns showed the best effect when the ply number is less than 5, twist number is less than 400tpm, and the annealing time is 20minutes.

• Composites Research
• /
• 제14권6호
• /
• pp.47-58
• /
• 2001

This paper describes applications of cure monitoring techniques by using embedded fiber optic strain sensors, which are extrinsic Fabry-Perot interoferometric (EFPI) and/or fiber Bra99 grating (FBG) sensors, to three kinds of molding methods of autoclave, FW and RTM molding methods. In these applications, internal strain of high-temperature curing resin was monitored by EFPI sensors. From theme experimental results, it was shown that strain caused by thermal shrink at cooling stage could be measured well. In addition, several specific matters to these molding methods were considered. As thor an autoclave molding of unidirectional FRP laminates, it was confirmed that off-axis strain of unidirectional FRP could be monitored by EFPI sensors. As for FW molding using room-temperature (RT) cured resin, it was found that the strain outputs from EFPI sensors represented curing shrinkage as well as thermal strain and the convergence meant finish of cure reaction. It was also shown that this curing shrinkage should be evaluated with consideration on logarithmic change in stiffness of matrix resin. As for a RTM melding, both EFPI and FBC sensors were employed to measure strain. The results showed that FBG sensors hale also good potential for strain monitoring at cooling stage, while the non-uniform thermal residual strain of textile affected the FBG spectrum after molding. This study has proven that embedded fiber optic strain sensors hale practical ability of cure monitoring of FRP. However, development of automatic installation methods of sensors remains as a problem to be solved for applications to practical products.

• Biomolecules & Therapeutics
• /
• 제22권2호
• /
• pp.122-128
• /
• 2014

The stiffness of cancer cells is attributable to intermediate filaments such as keratin. Perinuclear reorganization via phosphorylation of specific serine residue in keratin is implicated in the deformability of metastatic cancer cells including the human pancreatic carcinoma cell line (PANC-1). 12-O-Tetradecanoylphorbol-13-acetate (TPA) is a potent tumor promoter and protein kinase C (PKC) activator. However, its effects on phosphorylation and reorganization of keratin 8 (K8) are not well known. Therefore, we examined the underlying mechanism and effect of TPA on K8 phosphorylation and reorganization. TPA induced phosphorylation and reorganization of K8 and transglutaminase-2 (Tgase-2) expression in a time- and dose-dependent manner in PANC-1 cells. These effects peaked after 45 min and 100 nM of TPA treatment. We next investigated, using cystamine (CTM), Tgase inhibitor, and Tgase-2 gene silencing, Tgase-2's possible involvement in TPA-induced K8 phosphorylation and reorganization. We found that Tgase-2 gene silencing inhibited K8 phosphorylation and reorganization in PANC-1 cells. Tgase-2 gene silencing, we additionally discovered, suppressed TPA-induced migration of PANC-1 cells and Tgase-2 overexpression induced migration of PANC-1 cells. Overall, these results suggested that TPA induced K8 phosphorylation and reorganization via Tgase-2 expression in PANC-1 cells.

• 한국자동차공학회논문집
• /
• 제15권2호
• /
• pp.126-134
• /
• 2007

Although there has been substantial research on the squeal noise for the automotive brake system, robust design issues with respect to control factors equivalent to design variables in optimization, noise factors due to system uncertainties, and signal factors designed to accommodate a user-adjustable setting still need to be addressed. For the purpose, the robust design applied to the disk brake system has been investigated by DOE (Design of Experiments) based Taguchi analysis with dynamic characteristics. The specific goal of this methodology is to identify a design with linear signal-response relationship, and variability minimization. The finite element models of the disk brake assembly have been constructed, and the squeal noise problems have been solved by complex eigenvalue analysis. As the practical robust design to reduce the brake squeal noise, material properties of pad, disk, and backplate, thickness and geometry of pad are selected as control factors, material properties of pad and disk, and the contact stiffness have been considered as noise factors, and friction coefficient between pad and disk is chosen as a signal factor. Through the DOE based robust design, the signal-to-noise ratio and the sensitivity for each orthogonal array experiment have been analyzed. Also, it has been proved that the proposed robust design is effective and adequate to reduce the brake squeal noise.

• 한국항공우주학회지
• /
• 제33권11호
• /
• pp.24-32
• /
• 2005

본 연구의 목표는 X-band에서 하중지지가 가능한 전자파 흡수 구조(RAS)를 제작하는 것이다. 본 연구에서는 하중을 지지할 수 있도록 비강성비강도가 우수한 유리섬유/에폭시 평직 복합재료에 손실을 일으킬 수 있는 MWNT를 첨가한 재료를 제작하였으며, 미세구조의 관찰과 유전율 측정을 통해 흡수 재료로의 적합성을 확인하였다. 유전자 알고리즘과 다층형 RAS의 전자파 반사/투과 이론을 적용하여 그 복합재료로 이루어진 RAS에 대한 최적설계를 수행하였다. RAS의 제작을 통해 복합재료의 층당 두께가 층수와 MWNT의 함량에 따라 변함을 확인하였다. 이를 고려한 제작 공정을 제안하고 적용하여 설계된 RAS를 제작하였고, 그것의 반사손실의 예측치와 실험치가 잘 일치함을 확인하였다.