Local Buckling Strength of PFRP I-Shape Compression Members Obtained by LRFD Design Method and Closed-Form Solution |
Choi, Jin-Woo
(ISIS E&C)
Seo, Su-Hong (ISIS E&C) Joo, Hyung-Joong (ISIS E&C) Yoon, Soon-Jong (Department of Civil Engineering, Hongik University) |
1 | Choi, J. W., Lee, S., Joo, H. J., Kim, C. W., Ok, D. M., and Yoon, S. J. (2011), "Design Consideration of the Nonuniform Stress Distribution of Pultruded Structural Member under Compression," Advanced Materials Research, Vols. 250-253, pp. 3564-3570. DOI |
2 | Chae, S. H. (2005), A Study on the Analysis and Design of Orthotopic Thin-Walled Columns, PhD Thesis, Hongik University, Seoul. (in Korean). |
3 | Choi, J. W. (2009), Local Buckling Load of Pultruded Structural Members with Material Properties Variations in the Cross-Section, MS Thesis, Hongik University, Seoul. (in Korean). |
4 | Choi, J. W., Lee, K. Y., Park, J. H., and Yoon, S. J. (2012), "An Analytical Study on the Buckling of Orthotropic Plates and Local Buckling of Compression Members," Journal of the Korean Society for Advanced Composite Structures, Vol. 3, No. 1, pp. 21-28. (in Korean). 과학기술학회마을 DOI ScienceOn |
5 | Joo, H. J. (2003), A Study on the Local Buckling Analysis of Orthotropic I-Shape Compression Members, MS Thesis, Hongik University, Seoul. (in Korean). |
6 | Joo, H. J. (2010), Buckling Behavior and Design of Pultruded Thin-Walled Open Section Compression Members, PhD Thesis, Seoul, Hongik University. |
7 | Kollar, L. (2002), "Buckling of Unidirectionally Loaded Composite Plates with One Free and One Rotationally Restrained Unloaded Edge," Journal of Structural Engineering, ASCE, Vol. 128, No. 9, pp. 1202-1211. DOI ScienceOn |
8 | Kollar, L. (2003), "Local Buckling of Fiber-Reinforced Plastic Composite Structural Members with Open and Closed Cross Sections," Journal of Structural Engineering, ASCE, Vol. 129, No. 11, pp. 1503-1513. DOI ScienceOn |
9 | Yoon, S. J. (1993), Local Buckling of Pultruded I-Shape Columns, PhD Thesis, Georgia Institute of Technology, Atlanta, GA. |
10 | Zureick, A. and Steffen, R. (2000), "Behavior and Design of Concentrically Loaded Pultruded Angle Struts," Journal of Structural Engineering, ASCE, Vol. 126, No. 3, pp. 406-416. DOI ScienceOn |
11 | American Society of Civil Engineers (2010), Pre-Standard for Load & Resistance Factor Design of Pultruded Fiber Reinforced Polymer Structures, American Composites Manufacturers Association. |
12 | Lee, S. (2003), Flexural-Torsional Buckling of Pultruded T-Sections, PhD Thesis, Georgia Institute of Technology, Atlanta, GA. |