• Steel and Composite Structures
• /
• 제46권4호
• /
• pp.525-538
• /
• 2023

This paper focuses on the energy absorption of lattice core sandwich structures of different configurations. The diamond lattice unit cell, which has been extensively investigated for energy absorption applications, is the starting point for this research. The energy absorption behaviour of sandwich structures with an expanded metal sheet as the core is investigated at low-velocity impact loading. Numerical simulations were carried out using ABAQUS/EXPLICIT and the results were thoroughly compared with the experimental results, which indicated desirable accuracy. A parametric analysis, using a Box-Behnken design (BBD), as a method for the design of experiments (DOE), was performed. The samples fabricated in three levels of parameters include 0.081, 0.145, and 0.562 mm² Cell sizes, and 0, 45, and 90-degree cell orientation, which were investigated. It was observed from experimental data that the angle of cells orientation had the highest degree of influence on the specific energy absorption. The results showed that the angle of cells orientation has been the most influential parameter to increase the peak forces. The results from using the design expert software showed the optimal specific energy absorption and peak force to be 1786 J/kg and 26314.4 N, respectively. The obtained R2 values and normal probability plots indicated a good agreement between the experimental results and those predicted by the model.

• 대한한의학회지
• /
• 제30권1호
• /
• pp.26-39
• /
• 2009

Objectives: Pulse energy values recorded with an add-pres sure-type pulse apparatus were correlated with Sasang constitutional syndromes in order to match pulse energy values with Sasang prescriptions. Methods: The pulse energy values were measured with Daeyo Pulse Apparatus at the Gwan pulse point of both wrists. Prescriptions were divided into two major categories of interior syndromes or exterior syndromes, and categorized according to major component herbs specific to each of the four Sasang constitutions, and the relationship between the pulse energy and each groups divided by their prescription was studied. Results: About 10% of all people had nonmal pulse energy values. 10% had values over normal range, and $70\sim80%$ had lower values than normal. The normal range of pulse energy was regarded as being between 450 and 700. Conclusions: 1. For patients of the Soeum constitution, prescriptions without Panax ginseng is suitable for patients with high pulse energy, and prescriptions containing Panax ginseng are suitable for patients who have lower pulse energy. 2. All prescriptions for the Soyang constitution containing Rehmannia radix preparata or Comus officinalis are suitable for patients who have lower pulse energy, and prescriptions containing Rehmannia radix or Gypsum fibrosum are applicable to patients with pulse energy values higher than normal. 3. Most prescriptions for the Taeum constitution containing Semen coicis or Semen castaneae are suitable for patients with lower pulse energy, and prescriptions containing Radix puerariae or Radix et rhizoma rhei can be prescribed for patients who have lower pulse energy levels. 4. The Taeyang constitutional prescription Ogapijangcuck-tang is suitable for patients who have higher pulse energy levels and Mihudeungsikjang-tang is better for patients with lower than normal pulse values. As described above, the pulse energy level of each patient can be matched with a specific Sasang constitutional prescription. If this relationship is taken into consideration with other conventional symptoms, it can be helpful in diagnosis, improving efficacy of treatment, and be used as objective evidence.

• Journal of Biosystems Engineering
• /
• 제39권2호
• /
• pp.101-110
• /
• 2014

Purpose: The purpose of this study is to develop a system to optimize drying potential energy of the exhausted hot air by changing relative humidity of the air. This study modified the conventional drying method into a drying method changing exhaust cycle and time in order to control the relative humidity of the exhausted hot air during drying process. Method: A valve on the vent was controlled according to a preset time to change the exhaust cycle and time. This study analyzed the influence of the two different types of drying method on the drying characteristics, required energy, and quality of the dried peppers: conventional drying method exhausting hot air continuously and new drying method controlling exhaust cycle and time. Results: Drying characteristics based on exhaust time showed that drying time increased with exhaust time, and specific energy consumption was reduced by 28% from 18.39 MJ/kg (conventional method) to 13.24 MJ/kg when exhaust time was set to one minute. Drying characteristics based on heating time showed that drying time increased with heating time and specific energy consumption was reduced by 30% from 18.39 MJ/kg (conventional method) to 12.87 MJ/kg when exhaust time was set to 22 minutes. Drying characteristics based on exhaust cycle showed that drying time increased with exhaust cycle, and specific energy consumption was reduced by 31% from 18.39 MJ/kg (conventional method) to 12.69 MJ/kg when exhaust time was set to one minute and exhaust cycle was set to 22 minutes before drying and 40 minutes after drying. The quality of the dried red peppers showed that capsaicin, color, and sugar content were high as 34.87 mg/100g, 66.33, and 11.87%, respectively, when exhaust time was set to one minute and exhaust cycle was set to 22 minutes before drying and 40 minutes after drying. Conclusions: In order to utilize the drying potential energy of the exhausted air during drying process, the conventional drying method was modified into the drying method controlling exhaust cycle and time. The results showed that drying with exhaust cycle of one minute was more efficient in terms of drying time, required energy, and quality of the dried peppers than the one with exhaust cycle of 20~40 minutes.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 춘계학술강연 및 발표대회강연 및 발표논문 초록집
• /
• pp.51-51
• /
• 2006

• 임산에너지
• /
• 제21권2호
• /
• pp.17-24
• /
• 2002

소나무 수피로 부터 수증기 활성화 의하여 활성탄을 제조하였으며, 제조된 활성탄은 세공 구조 및 표면적에 대한 검토를 행하였다. 활성화를 위하여 3종류의 서로 다른 형태의 로(정치식 수직, 수평로 및 회전식 수평로)가 본 실험에 사용되었다. 정치식 수직 및 수평로를 이용하여 수피를 탄화시키고 이를 수증기 활성화시키면, 1,000 ㎡／g이상의 높은 비표면적을 얻기는 어려웠다. 분말상태의 시료를 사용하면 비표면적이 약간 향상되었지만, 여전히 정치식 로의 경우 높은 비표면적의 결과를 얻기는 어려웠다. 로타리식 수평로에서 수피를 수증기 활성화시키면, 시판 1급 활성탄과 유사한 1,000 ㎡／g 이상의 비표면적을 나타내는 활성탄을 제조할 수 있었다. 로타리식 수평로에서 제조된 활성탄은 미세공에서 중세공까지 다양한 공극 분포를 나타내었다.

• 한국재료학회지
• /
• 제28권1호
• /
• pp.62-67
• /
• 2018

Active clay, bentonite and zeolite were used as porous materials for humidity controlling ceramic boards. The specific area and the pore volume of active clay were higher than bentonite and zeolite. The flexible strength of the gypsum board decreased with an increasing amount of porous material, and the flexible strength was lowest when active clay with a higher specific surface area than others porous materials was added. The specific surface area and total pore volume of ceramic boards containing porous material were highest at $102.25m^2/g$, $0.142cm^3/g$, respectively, when the active clay was added. In addition, as the amount of added porous materials increased, the specific surface area and total pore volume of the ceramic board increased, but the average pore diameter decreased. The addition of s porous materials with a high specific area and a large pore volume improved the moisture absorptive and desorptive performance of the ceramic board. Therefore, in this experiment, the moisture absorptive and desorptive properties were the best when active clay was added. Furthermore, as the amount of added porous materials increased, the moisture absorptive and desorptive properties improved. When 70 mass% of active clay was added to ${\alpha}$-type gypsum, the hygroscopicity was the highest, about $300g/m^2$, in this experiment.

• 대한토목학회논문집
• /
• 제31권1B호
• /
• pp.57-62
• /
• 2011

하천에 설치되는 수공구조물은 유수흐름, 소류력 등에 변화를 주어 하천재해의 원인이 된다. 따라서 본 연구에서는 홍수통제 등의 목적으로 설치되는 횡월류위어에 의한 에너지변화와 소류력변화를 수리실험을 통하여 분석하였다. 실험수로는 사다리꼴 형태, 수로경사는 0.1%-1.0% 범위, 유량은 25 l/sec의 조건으로 횡월류위어 설치 전 후에 대한 실험을 수행하였다. 실험결과, 경사가 커질수록 비에너지비가 증가하였고, 경사가 1.0%에서는 비에너지비가 1보다 큰 지점이 나타났다. 소류력비는 경사가 커질수록 작아지지만, 소류력비가 1보다 큰 구간은 하류방향으로 더 넓게 분포하는 것으로 나타났고, 계산된 소류력비는 약 1.3이다.

• 플랜트 저널
• /
• 제8권4호
• /
• pp.34-39
• /
• 2012

석탄화력발전소에서 저품위탄 연소시 통풍저항 변화로 인해 승압송풍기의 운전점에 영향을 주는 것을 분석하여 현재운전점 대비 실속시점을 예측하였다. 연료의 발열량이 낮을수록 통풍저항 증가 속도가 빨라지며, 통풍저항과 승압송풍기의 운전점과는 강한 상관관계가 있음을 확인하였다. 발열량이 낮을수록 통풍저항이 빨리 상승하며 이는 곧 승압송풍기의 운전점이 설계탄 대비해서 실속 한계운전점에 빨리 도달하게 된다. 이를 근거로 현재운전점 대비 한계운전점까지의 운전여유분과 발열량별 통풍저항 증가 속도를 계산하여 실속시점을 예측할 수 있어 송풍기 실속으로 인한 발전출력의 감소나 운전정지에 대비한 정비계획 수립 등 안정운전에 많은 도움이 될 것으로 예상한다.

• Nuclear Engineering and Technology
• /
• 제43권2호
• /
• pp.149-158
• /
• 2011

Metal waste generated from the pyroprocessing of 10 MtU of spent fuel was classified by comparing the specific activity of a relevant radionuclide with the limit value of the specific activity specified in the Korean acceptance criteria for a lowand intermediate-level waste repository. A Korean Optimized Fuel Assembly design with a 17${\times}$17 array, an initial enrichment of 4.5 weight-percent, discharge burn-up of 55 GWD/MtU, and a 10-year cooling time was considered. Initially, the mass and volume of each structural component of the assembly were calculated in detail, and a source term analysis was subsequently performed using ORIGEN-S for these components. An activation cross-section library generated by the KENO-VI/ORIGEN-S module was utilized for top-end and bottom-end pieces. As a result, an Inconel grid plate, a SUS plenum spring, a SUS guide tube subpart, SUS top-end and bottom-end pieces, and an Inconel top-end leaf spring were determined to be unacceptable for the Gyeongju low- and intermediate-level waste repository, as these waste products exceeded the acceptance criteria. In contrast, a Zircaloy grid plate and guide tube can be placed in the Gyeongju repository. Non-contaminated Zircaloy cladding occupying 76% of the metal waste was found to have a lower level of specific activity than the limit value. However, Zircaloy cladding contaminated by fission products and actinides during the decladding process of pyroprocessing was revealed to have 52 and 2 times higher specific activity levels than the limit values for alpha and $^{90}Sr$, respectively. Finally, it was found that 88.7% of the metal waste from the 17${\times}$17 Korean Optimized Fuel Assembly design should be disposed of in a deep geological repository. Therefore, it can be summarized that separation technology with a higher decontamination factor for transuranics and strontium should be developed for the efficient management of metal waste resulting from pyroprocessing.

• 한국항공우주학회지
• /
• 제50권12호
• /
• pp.819-828
• /
• 2022

본 연구는 일반적인 쿼드 틸트 로터 타입의 전기 추진 수직이착륙 항공기에 대하여 배터리의 성능에 따른 기체 사이징의 민감도를 분석하였다. Uber Elevate와 NASA가 제시한 임무 요구도를 기반으로 초기 기체 사이징을 수행하였으며, 200Wh/kg~400Wh/kg의 배터리 팩 기준 비에너지와 4C~5C의 연속 방전율 범위에 대하여 항공기의 총 중량은 5,000lb~11,000lb으로 예측되었다. 기체 총 중량을 7,000lb를 가정 시 가용 출력과 가용 에너지 측면에서 각각 요구되는 배터리 사양을 도출하였으며, 배터리 비에너지와 방전율의 영향을 분석하였다. 배터리 팩 고장 및 프롭 로터 고장과 같은 조건을 고려하여 배터리 최대 방전율 또한 제시하였다.