• Journal of the Korean GEO-environmental Society
• /
• v.13 no.7
• /
• pp.19-29
• /
• 2012

For foundation of Port structure, it is essential geotechnical understanding about feature of ground and the geologic formation which is different to terrestrial ground. What is most important is the understanding of soft ground clay, which is much softer than terrestrial ground. To build foundation of a port structure which is mainly gravity based on the special geographical circumstance that is on the sea, the improvement method of foundation should be applied according to soft clay ground features. Therefore, in this study, the behaviors of improved materials with strength were analyzed on the soft clay foundation where suppose to be located the foundation of port structure. The laboratory model test has been conducted in 2 cases with unconfined compression strength of improved materials, 25kPa and 125kPa. Cement, water, and in-situ soft clay were combined at a fixed rate and made a shape of 5cm diameter ${\times}$ 70cm height column. Improved materials were located with replacement ratio(11%, 35% and 61%) in 38cm diameter ${\times}$ 80cm height cylinder. Finally, the stress distribution ratio on the improved materials and clay, settlement was analyzed by applying a load of 10kPa, 30kPa, and 50kPa.

• The Korean Journal of Emergency Medical Services
• /
• v.13 no.1
• /
• pp.19-33
• /
• 2009

Purpose : To check the legal relation between rescue team and patient as well as legal responsibility for patient's damage intentionally or erroneously caused by rescue member, a public official, in the performance of relevant job ; to prevent legal dispute over rescue team and to present program for fair settlement of dispute and equitable and feasible burden of damage. Method : First, the legal principle of Civil Law, Criminal Law and Administrative Law related to the theme of this research will be investigated around research by literature. Second, the case of dispute related to rescue team will be introduced. Result: 1. If 119 rescue members as a public official intentionally or erroneously cause damage to patient in the performance of job, they shall bear civil, criminal and administrative responsibility. They shall bear civil responsibility for indemnity for damage due to default or tort. The typical criminal responsibility includes accidental homicide arising out of duty, preparing falsified official document, dereliction of duty, etc. In the administrative side, the state is responsible for indemnity for peculiar status of the rescue member, public official. 2. Though raising civil petition or legal dispute over unsatisfactory rescue service may be reasonable to guarantee the right of nation, such action may cause stress to rescue member as well as may lead to mental shrinking and defensive attitude only to take the basic first aid treatment which has low possibility of mistake instead of active first aid treatment so as to avoid legal responsibility. 3. The program that may prevent legal dispute over 119 rescue team includes expansion of manpower specialized in first aid treatment, enhancement of education on legal environment, development and application of standard job guideline, formation of mutual trust with patient, detailed explanation, preparing and keeping minute record, improvement of the rescue members' ability of first aid treatment and development of medical instruction mode. Conclusion : The best policy is to prevent legal dispute. If it is impossible to basically exclude the possibility of dispute, however, we need to make effort to minimize the occurrence, settle fairly and divide damage equitably and feasibly. To improve the preventible death rate of our first aid system to the level of advanced country, 119 rescue team which is in charge of the stage before hospital needs to positively enforce special first aid by improving the qualitative level of rescue service and to strive to prevent legal dispute that may occur in the process.

• Korean Chemical Engineering Research
• /
• v.51 no.2
• /
• pp.214-220
• /
• 2013

Hydrophobic coating on a silicate-based yellow phosphor ($Sr_2SiO_4:Eu^{2+}$) was carried out by using hexamethyldisiloxane (HMDSO) precursor in an atmospheric pressure dielectric barrier discharge plasma reactor, eventually to improve the long-term stability and reliability of the phosphor. The phosphor powder samples were characterized by a scanning electron microscope (SEM), a transmission electron microscope (TEM), a fluorescence spectrophotometer and a contact angle analyzer. After the coating was prepared, the contact angle of the phosphor powder increased to $133.0^{\circ}$ for water and to $140.5^{\circ}$ for glycerol, indicating that a hydrophobic layer was formed on its surface. The phosphor coated with HMDSO exhibited photoluminescence enhancement up to 7.8%. The SEM and TEM images of the phosphor powder revealed that the plasma coating led to a morphological change from grain-like structure to smooth surface with 31~46 nm thick hydrophobic layer. The light emitting diode (3528 1 chip LED) fabricated with the coated phosphor showed a substantial enhancement in the reliability under a special test condition at $85^{\circ}C$ and 85% relative humidity for 1,000 h (85/85 testing). The plasma-mediated method proposed in this work may be applicable to the formation of 3-dimensional coating layer on irregular-shaped phosphor powder, thereby improving the reliability.

• The korean journal of orthodontics
• /
• v.24 no.3 s.46
• /
• pp.673-693
• /
• 1994

Most adults, unlike growing children, have some periodontal problems which can influence the outcome of the orthodontic treatment. In cases where periodontal disease progression resulted in marked reduction of periodontium, orthodontic treatment could result in the worsening of the periodontal conditions, and therefore orthodontic treatment planning in such adult patients requires special considerations for the periodontal problems. This study investigates the effects of horizontal orthodontic tooth movement on the changes in the mesial, distal and furcation areas of the disease affected periodontium of adult dogs with advanced bone loss. Six adult dogs with healthy periodontium were selected, and mandibular 2nd premolars were extracted. In the mandibular 3rd premolars, angular bony defects in the mesial and distal sides, and horizontal bony defects in the furcation areas were created. Those that received the flap operation and plaque control were designated as the control, those that had horizontal tooth movement without plaque control after the flap operation as Experimental group I, those that had horizontal tooth movement under plaque control without the flap operation as Experimental group II, and those that had horizontal tooth movement under plaque control after the flap operation as Experimental group III. The control group was sacrificed 2 months postoperatively, and the experimental groups were sacrificed 5 months after the initiation of tooth movement. Specimens were histologically analyzed under light microscope. The results were as follows; 1. After the horizontal tooth movements, Experimental group I and II showed angular bony defects in the mesial sides of the roots and the distal side of the furcation areas, which correspond to the pressure sides. 2. After the horizontal tooth movements, Experimental group I and II showed decreased level of alveolar bone crest in the distal sides of the roots, which correspond to the tension sides. 3. Long junctional epithelium in the control group has not been replaced by periodontal connective tissue after the horizontal tooth movements. 4. Limited formation of new bone was observed in the angular bony defects in the mesial and distal aspects of the roots in the control group. 5. Inflammatory cell infiltration in the connective tissue was most severe in the Experimental group I, followed by Experimental group II, III, and the control group in that order. These results seem to indicate that plaque control was the most influencing factor in the alteration of the periodontal tissue after the horizontal tooth movements in the periodontal tissue with alveolar bone defects.

• Culinary science and hospitality research
• /
• v.18 no.1
• /
• pp.91-103
• /
• 2012

The study model was designed and the hypothesis was drawn based on precedent studies in order to analyze the effects of teamwork by servant leadership on job attitudes, aiming at full-time regular status employees and contract employees lower than the general manager position at special grade hotels in Busan. The SPSS WIN Version 15.0 integrated package for data process was used to verify the hypothesis through frequency analysis, reliability analysis, factorial analysis and regression analysis. As a result of study, the verification result for the effect of servant leadership on communication among the teamwork factors showed that forming sympathy and community and vision meaningfully affects communication; the verification result for the effect of servant leadership on interdependence among the teamwork factors showed that forming community, stewardship, vision factor meaningfully affects interdependence; The verification result for the effect of the teamwork factor on organizational commitment as a job attitude showed communication and interdependence meaningfully affect organizational commitment, one of job attitudes. Cousequently, the leaders in hotel organizations are expected to need a role of personnel management through organizational dependence and participatory management, to draw harmony and corporation among employees and build organizing systems, presenting a clear vision about the future to them.

• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.1
• /
• pp.43-66
• /
• 1997

Dental implant may be immediately placed in postextraction socket which has alveolar bone defect. The purpose of this study was to compare the bone regeneration and bone quality around defects adjacent to implants that were placed into extraction sockets according to EFEB, GTAM barrier and GTAM barrier with DFDB. Mandibular P2, P3 and P4 were extracted bilaterally in dogs, and buccal defects were created about 4mm in depth and 3.3mm in width. Screwed pure titanium implants, 3.8mm in diameter and 10mm in length, were placed into the extraction sockets. The experimental groups were divided into four groups : the G group was covered with a GTAM barrier on the defective area, the D+G group was filled with DFEB and covered with a GTAM barrier, the D group was filled with DFDB only and the control group was sutured without any special treatment on the defective area. The experimental animals were killed after 12 weeks and specimens were prepared for light microscopic evaluation and fluorescent dyes were administered daily for 2 weeks after implantation, and injected on the 4th and 11th week for fluorescent microscopic examination to observe new bone formation and bone remodeling. The new Bone height of the buccal defect was measured and compared with the another for bone gain and the removal torque for the implant was measured for the comparison of bone density and bone-implant osseointegration. Results obtained were as follows : 1. Experimental groups showed bone regeneration in oder from D+G, G, D group and control. D+G and G group was significantly from D group and control(P<0.01). 2. In the defective area of control the regenerated alveolar bone showed poorly developed lamellated structure and fibrous tissue intervention into the bone-implant interface but the others showed well developed lamellated structure and osseointegration. 3. All implant groups showed no significaant difference in the removal torque for implant(P>0.05) These results suggest that immediate implants placed in defective sockets were successfully osseointegrated and utilizing placed in defective sockets were successfully osseointegrated and utilizing not only the combination of GTAM and DFDB but also only the GTAM was favorable for the predictable regeneration of the defective area.

• Atmosphere
• /
• v.17 no.3
• /
• pp.299-314
• /
• 2007

The purpose of this study is to summarize tropical cyclone activity in 2006. Twenty three tropical cyclones of tropical storm (TS) intensity or higher formed in the western North Pacific and the South China Sea in 2006. The total number is less than the thirty-year (1971~2000) average frequency of 26.7. Out of twenty three tropical cyclones, fifteen cyclones reached typhoon (TY) intensity, while the rest eight cyclones only reached severe tropical storm (STS) and tropical storm (TS) intensity - three STS and five TS storms. The tropical cyclone season in 2006 began in May with the formation of CHANCHU (0601). The convective activity was slightly inactive around the Philippines from late June to early August. In addition, subtropical high was more enhanced than normal over the south of Japan from May to early August. Consequently, most tropical cyclones formed over the sea east of the Philippines after late June, and many of them moved westwards to China. CHANCHU (0601), BILIS (0604), KAEMI (0605), PRAPIROON (0606) and SAOMI (0608) brought damage to China, the Philippines, and Vietnam. On the other hand, EWINIAR (0603) moved northwards and hit the Republic of Korea, causing damage to the country. From late August to early September, convective activity was temporarily inactive over the sea east of the Philippines. However, it turned active again after late September. Subtropical high was weak over the south of Japan after late August. Therefore, most tropical cyclones formed over the sea east of the Philippines and moved northwards. WUKONG (0610) and SHANSHAN (0613) hit Japan to bring damage to the country. On the other hand, XANGSANE (0615) and CIMARON (0619) moved westwards in the South China Sea, causing damage to the Philippines, Thailand, and Vietnam. Another special feature in 2006 tropical cyclone activity is that IOKE (0612) formed in the central North Pacific crossed 180 degree longitude and moved into the western North Pacific. It has been four years since HUKO (0224) in 2002.

• Journal of Mushroom
• /
• v.11 no.1
• /
• pp.1-8
• /
• 2013

In this study, twelve of Lepista nuda were collected from various localities in Korea. Also thirteen exotic L. nuda species were collected from Japan, France, Switzerland and Portugal. Spores were isolated under optical microscope. These spores were placed on the surface of YM medium for inducing to germination. Eleven mating-groups were selected by morphological characters of fruit body such as size, color and stipe patterns. Intra-isolate crosses were made between two single-spore isolates derived from mating-groups. Also, dikaryotic crossing using the isolates from L. nuda were carried out to evaluated tetrakaryon formation. Cross-mating compatibility tests also verified its dikaryotic state by microscopic or molecular genetic observation of clamp connection and Random Amplified Polymorphic DNA (RAPD) band pattern. To analyze the growth rate of hybrids and parents mycelium in dikaryons obtained from compatible mating groups were placed on PDA medium. Intra-isolate crosses determined eleven mating-groups within L. nuda. The typical clamp connection were mostly observed in mating-groups of Korean L. nuda in $K1{\times}K2$, $K1{\times}K3$, $K1{\times}K4$, $K1{\times}K6$, $K1{\times}K5$, $K2{\times}K4$, $K2{\times}K3$, $K2{\times}K6$, $K3{\times}K4$, $K4{\times}K5$, and $K4{\times}K6$. Korean L. nuda type of dikaryon, shown to cross-incompatibility with L. sordida, it seemed that mating induce more rapidly than wild types in a view of growth rate. In conclusion, it would be useful to improve mass production with better morphological characteristics through a special mating of L. nuda.

• 한국해양학회지
• /
• v.9 no.2
• /
• pp.52-58
• /
• 1974

The water temperature distribution and the water movement closely related with it, in the east side of Korea, was condidered. Special emphasis was paid on the low temperature phenomenon near Ulgi. It was known from the temperature distribution in the east side of Korea that the Tsushima current continues to flow northward at the surface near Sokcho. Also the influence of the cold water extends from the North to the South with increasing depth. The formation of the cold core near Ulgi was explained as due mainly to the existence of the boundary layer near the surface, and partly to the effect of the wind. This inclination of the boundary layer has the value of about 3.0m/Km, and the lower cold current velocity computed using this value lies in the range of those observed by Nishida(1926, 1927). The upwelling velocity was computed approximately as 1.4 10$\^$-3/ cm/sec, and the maximum distance to which the boundarylayer can rise or fall from it's equilibrium position was considered as below 10m.

• Horticultural Science & Technology
• /
• v.29 no.6
• /
• pp.617-622
• /
• 2011

The study was conducted to determine the efficiency in producing spontaneous polyploids in some mandarin hybrids with different seed embryony. Seed formation by open pollination, frequency of spontaneous polyploids, and plant growth characteristics were evaluated in four mandarin hybrids with polyembryony such as 'Amakusa', 'Haruka', 'Hayaka', and 'Seminole' and two with monoembryony such as 'Benibae' and 'Harehime'. The mean number of the developed seeds per fruit was 10.0 and frequency of small seeds was 25.1%. Polyploids were selected from plants germinated in vitro by a flow cytometry and confirmed by chromosome analysis. One triploid was produced from 'Harehime', one tetraploid, 'Amakusa', and one tetrapoid, 'Benibae'. There were little differences in leaf shape, thickness, petiole length, and internode length between diploids and polyploids such as tri- or tetraploid. However, polyploids had larger stomata and lower density of stomata in abaxial epidermis than diploids. SPAS indicating chlorophyll content and photosynthetic rate were significantly affected by ploidy level. The results indicated that spontaneous polyploids might be produced by open pollination in some mandarin hybrids and monoembryony had higher frequency in polyploid occurrence than polyembryony.