• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.6C
• /
• pp.506-515
• /
• 2010

In this paper, we compare and analyze the spectral efficiency of representative adaptive MIMO algorithms in indoor environments. We first briefly investigate the modulation and demodulation schemes of MIMO algorithms to be compared and then implement adaptive algorithms by using BPSK and square QAM schemes up to 256QAM. We finally compare the spectral efficiency of adaptive MIMO algorithms employing (2$\times$2) or (4$\times$4) antenna array through the computer simulation in indoor environments.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.12
• /
• pp.75-82
• /
• 1998

Many multiplexing techniques are proposed for high storage densities in a volume hologram. In this paper, we present a hybrid angularly and spatially multiplexed volume holographic memory system. Multiple holograms are recorded by using reference and object waves with different incident angles and positions that are changed by step motors. A hologram is written by exposing the crystal with recording time schedule to the interference pattern of the object beam and a reference plane wave. Finally, we show experimental results of the storage of three layers of 300 multiplexed holograms in a LiNbO$_3$ : Fe crystal.

• Korean Journal of Optics and Photonics
• /
• v.8 no.3
• /
• pp.241-244
• /
• 1997

A speckle pattern from an optical fiber is used for a reference beam in writing and reading a volume hologram. The photorefractive volume hologram with this scheme shows good spatial selectivity for spatial(shift) multiplexing because the speckle pattern in writing and reading a hologram looses correlation with a small spatial shift. This scheme has the insensitivity to axial movement. The data storage system with this scheme will have a high storage density and a good stability in operation. We theoretically analyze the diffracted beam from a volume hologram recorded with the speckle pattern from the optical fiber. Experimental results are presented and compared with numerical analysis.

• Journal of the Optical Society of Korea
• /
• v.11 no.2
• /
• pp.59-62
• /
• 2007

In this paper, we introduce a reliable, scalable, and cost-effective switchless wavelength division multiplexing (WDM) network based on a quality-of-service supporting reservation-based medium access control (MAC) protocol. The protocol not only provides both packet and circuit switching but also supports multicasting. The network efficiency is significantly increased by spatially reusing wavelengths and exploiting multiple free spectral ranges (FSRs) of arrayed waveguide grating (AWG) employed in the architecture. We have demonstrated the feasibility of this architecture by simulating in $Optsim^{TM}$.

• Journal of the Optical Society of Korea
• /
• v.12 no.4
• /
• pp.346-350
• /
• 2008

In this paper, we analyze the performance of a reliable, scalable, and cost-effective switchless wavelength division multiplexing (WDM) network based on an arrayed waveguide grating (AWG). The network efficiency is significantly increased by spatially reusing wavelengths and exploiting multiple free spectral ranges (FSRs) of the AWG employed in the architecture. We have analyzed the performance of this architecture by simulating in $Optsim^{TM}$ with a control channel which exploits the broadband light source, i.e., an LED. The data was successfully transmitted to a distance of 30 km without using any EDFA's in the network, with a reasonable BER of $4.0530{\times}10^{-14}$. We have analyzed the performance of this architecture with a control channel which exploits the broadband light source, i.e., an LED, by simulating in $Optsim^{TM}$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.11A
• /
• pp.1244-1252
• /
• 2004

In this paper, we derive some properties of linear detectors (zero forcing or minimum mean square error) at spatial multiplexing systems with alamouti's space-time block code. Based on the derived properies, this paper proposes low-complexity receivers. Implementing MMSE detector adaptively, the number of weight vectors to be calculated and updated is greatly reduced with the derived properties compared to the conventional methods. In the case of recursive least square algorithm, with the proposed approach computational complexity is reduced to less than the half. We also identify that sorted QR decomposition detector, which reduces the complexity of V-Blast detector, has the same properties for unitary matrix Q and upper triangular matrix R. A complexity reduction of about 50%, for sorted QR decomposition detector, can be achieved by using those properties without the loss of performance.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.7
• /
• pp.55-61
• /
• 2004

This paper proposes an antenna selection and switching system between spatial multiplexing and diversity techniques. The proposed system overcomes spatial correlation by using antenna selection method and improve bit error performance with switching encoding nudes between a spatial multipexing encoder and a diversity encoder. Therefore, in a 4 transmit and 2 receive antenna system first, the proposed system selects 2 transmit antennas, and next, switches encoding modes between Space-Time Transmit Diversity and BLAST according to instantaneous channel information. Computer simulations showed that the proposed system improves about 2 or 3 ㏈ SNR in low correlated channel and about 3 ㏈ SNR in highly correlated channel rather than a 2 by 2 antenna switching system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.6C
• /
• pp.634-641
• /
• 2009

The goal of OSIC-series detection methods is to approach the ML performance with feasible complexity. However, since they sometimes suffer from the empty vector problem, they can not achieve the soft-output ML performance or many candidate vectors are required to achieve the soft-output ML performance. In this paper, we propose the novel detection method, which can generate the reliable soft-outputs without suffering from empty vector problem. The proposed detector can approach the near soft-output ML performance as well as hard-output. Further, the complexity study shows that the proposed detection method has the lowest complexity compared to the other detectors having the near ML performance.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.2
• /
• pp.702-721
• /
• 2012

In the DVB-T2 system with a multiple-input single-output (MISO) transmission mode, Alamouti coded orthogonal frequency division multiplexing (OFDM) signals are transmitted simultaneously from two spatially separated transmitters in a single frequency network (SFN). In such systems, each transmit-receive link may have a distinct carrier frequency offset (CFO) due to the Doppler shift and/or frequency mismatch between the local oscillators. Thus, the received signal experiences dual CFOs. This not only causes dual phase errors in desired data but also introduces inter-carrier interference (ICI), which cannot be removed completely by simply performing a CFO compensation. To overcome this problem, this paper proposes an iterative detection with dual phase errors compensation technique. In addition, we propose a successive-iterative ICI cancellation technique. This technique successively eliminates ICI in the initial iteration by exploiting pre-detected data pairs. Then, in subsequent iterations, it performs a fine interference cancellation using a priori information, iteratively fed back from the channel decoder. In contrast to previous works, the proposed techniques do not require estimates of dual CFOs. Their performances are evaluated via a full DVB-T2 simulator. Simulation results show that the DVB-T2 receiver equipped with the proposed dual phase errors compensation and the successive-iterative ICI cancellation techniques achieves almost the same performance as ideal dual CFOs-free systems, even for large dual CFOs.

• Korean Journal of Optics and Photonics
• /
• v.9 no.6
• /
• pp.368-372
• /
• 1998

A 16-views 3 dimensional imaging system is designed by spatially combinding two 8-views time multiplexed image channels. Each 8-views channel composed of 3 primary color CRTs and a dichroic beam splitter which combining the three CRTs as one channel. Each CRT displays 8-view images time sequentially. These images are projected to a holographic screen of a size 1$\times$0.8 $m^2$ through a projection optics. Characteristics of the three different configurations of projection optics are examined with the optics designing program "DEMOS" to select an optimized projection optics for the system. The configulation of the optimized projection optics is found like following; images from each channel combined by two-fold mirror are projected by a projection objective through a 16-strips LCD shutter. In this configuration, the shutter should be located at the entrance pupil of the objective, and the folded edge of the two-fold mirror should contact symmetrically to the center line of the shutter.e shutter.