• ETRI Journal
• /
• v.25 no.4
• /
• pp.253-257
• /
• 2003

This study investigated the photochromic properties and characterization of acetyl-substituted diarylethene (DAMBTF6)-doped fluoroacrylates media for holographic storage. For the rewritable holographic recording media, we prepared photochromic polymer films using an acrylate matrix by simple photocuring methods. Switching light sources from a visible (532 nm) to an ultraviolet (365 nm) produced transparent films that changed from pale yellow to red. Holographic recording was performed on the photochromic films by two interfering collimated plane wave beams. Excitation with a visible or ultraviolet light completely erased the records, and the film was rewritable either by 532 nm laser or by 325 nm laser within 2 seconds. Images were recorded onto a pixelated spatial light modulator with rectangular pixel apertures and reconstructed on the photochromic films to show recovery of the original images with high resolution.

• ETRI Journal
• /
• v.28 no.6
• /
• pp.697-708
• /
• 2006

Various adaptive mesh refinement techniques are often employed in numerical simulations for increasing spatial and temporal resolution beyond the limits imposed by available CPU time and memory space. Recently, an octree-based adaptive mesh structure was successfully used in fluid animation to place more grid cells efficiently in visually interesting regions of fluids. In an attempt to optimize the use of computational resources further in fluid animation, this paper extends this adaptive technique by modifying the mesh refinement scheme so that the camera's viewing properties are dynamically exploited during the simulation. Based on a simple adaptive mesh structure, we show that the new meshing strategy can save a substantial amount of computation time and memory space by using a view-dependent adaptive approach. The experimental results reveal that the proposed technique provides a good compromise between the computational effort and the simulation's fidelity, and may be used quite effectively in 3D animation production.

• 한국전산유체공학회:학술대회논문집
• /
• 1998.11a
• /
• pp.84-89
• /
• 1998

This paper describes aerodynamic heating on a hypersonic vehicle. For this purpose, the 2-D, and 3-D equilibrium code are developed. In order to obtain an accurate solution, AUSMPW+ is used for spatial discretization. Curve fitting data in NASA Reference Publication 1181, 1260 are used to calculate equilibrium properties. To observe aerodynamic heating phenomena, Reynolds number parametric study for diamond airfoil is done, 3-D full Navier-Stokes equation is computed and wall temperature distribution data are obtained. Analyzing these results, we conclude that Reynolds number and secondary flow are important factors in aerodynamic heating.

• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.404-411
• /
• 2010

The present paper deals with the continuous work of extending multi-dimensional limiting process (MLP), which has been quite successfully proposed on two- and three-dimensional structured grids, onto the unstructured grids. The basic idea of the present limiting strategy is to control the distribution of both cell-centered and cell-vertex physical properties to mimic a multi-dimensional nature of flow physics, which can be formulated as so called the MLP condition. The MLP condition can guarantee a high-order spatial accuracy without yielding spurious oscillations. Recently, MLP slope limiter was proposed based on the MUSCL-type reconstruction in two-dimensional case and it can be readily extended to three-dimensional case. Through various numerical analyses and extensive computations, it is observed that the proposed limiters are quite effective in controlling numerical oscillations and very accurate in capturing both discontinuous and continuous multi-dimensional flow features on 3-D tetrahedral grids.

• 한국전산유체공학회:학술대회논문집
• /
• 2004.10a
• /
• pp.3-6
• /
• 2004

In order to reduce the excessive numerical dissipation which is induced when a grid system is not aligned with a discontinuity, a new spatial treatment of cell-interface fluxes is introduced. The M-AUSMPW+ in this paper has the formula that has an additional procedure of re-defining transferred properties at a cell-interface, based on AUSMPW+. The newly defined transferred property could eliminate numerical dissipation effectively in non-flow aligned grid system of multi-dimensional flows.

• Food Science and Biotechnology
• /
• v.15 no.6
• /
• pp.925-930
• /
• 2006

Chitosan-based nanocomposite films were prepared using a solution intercalation method incorporating varying amounts of organically modified montmorillonite (Cloisite 30B) from 0 to 30 wt%. The nanocomposite films prepared were optically clear despite a slight decrease in the transmittance due to the spatial distribution of nanoclay. X-ray diffraction patterns indicated that a certain degree of intercalation or exfoliation formed when the amount of clay in the film was low and that microscale tactoids formed when the clay content in the sample was high (more than 10 wt%). The tensile strength (TS) of the chitosan film increased when the clay was incorporated up to 10 wt% and then decreased with further increases in the clay content of the film. The elongation at break (E) increased slightly upon the addition of low levels of clay up to 5 wt% and then decreased with further increases in the amount of the clay in the film. The water vapor permeability (WVP) decreased exponentially with increasing clay content. The water solubility (WS) and swelling ratio (SR) of the nanocomposite films decreased slightly, indicating that the water resistance of the chitosan film increased due to the incorporation of the nanoclay.

• Journal of Industrial Technology
• /
• v.21 no.A
• /
• pp.155-166
• /
• 2001

This paper deals with the subsequence searching problem under time-warping. Our work is motivated by the observation that subsequence searches slow down quadratically as the average length of data sequences increases. To resolve this problem, the Segment-Based Approach for Subsequence Searches (SBASS) is proposed. The SBASS divides data and query sequences into a series of segments, and retrieves all data subsequences. Our segmentation scheme allows segments to have different lengths; thus we employ the time warping distance as a similarity measure for each segment pair. For efficient retrieval of similar subsequences, we extract feature vectors from all data segments exploiting their monotonically changing properties, and build a spatial index using feature vectors. The effectiveness of our approach is verified through extensive experiments.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2011.01a
• /
• pp.185-188
• /
• 2011

In order to estimate spatial charging process in the corona charging which has been used to make polymer electret, the electrical properties of polypropylene film were obtained from Thermally Stimulated Current(TSC) measurements after corona charging between knife electrode and cylinder electrode with the voltages of -5, -6, -7 and -8[kV], respectively. And then the electrostatic contour and the electric field vector were also simulated by using Finite Element Method(FEM). The edge effect around edge of knife electrode affected the electrostatic contour on surface of specimen and the electric field concentration inside specimen. The uneven charging state in the electret due to the mistake on design could be calculated and so the optimal design of corona charging device which is appropriate to various materials is come to be practicable.

• School Mathematics
• /
• v.4 no.1
• /
• pp.97-109
• /
• 2002

In this paper, tangram-like puzzles which are made by dissecting square are introduced. Especially, tangram-like puzzles which are consists of five pieces, six pieces, seven pieces, eight pieces, nine pieces, ten pieces, twelve pieces, fourteen pieces are introduced. But, This Introduction is very superficial. It means introduction is focused on each piece's geometrical shape, relative area when each tangram-like puzzles' area is one. With this introduction, six tangram-like puzzles' implication in mathematics education are suggested as followings. (1) Tangram-like puzzles may help fostering spatial senses. (2) Tangram-like puzzles may help teaching polygons, and its properties, congruences, similarities, etc. (3)Tangram-like puzzles may help teaching additions of fractions. (4) Tangram-like puzzles may help fostering mathematical thinking. (5) Tangram-like puzzles may serve as topics for supplement or reinforcement in teaching and learning tangram. (6) Tangram-like puzzles may serve as topics for problem posing in teaching and learning tangram.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1992.10a
• /
• pp.130-135
• /
• 1992

복잡한 구조물의 동특성 해석은 수치 해석적인 방법과 실험적 방법 모두 단 순 구조물의 동특성 해석에 비해 정확도가 떨어지는 반면 계산시간과 노력 은 크게 증가하게 된다. 이 경우 구조물 전체를 여러개의 간단한 부분 구조 계로 부할하고, 각 부분 구조계에 대해서 해석후 그 결과들을 적절한 결합 조건하에서 다시 조합하여 전체 구조계에 대해 동특성 해석을 수행하거나, 고감쇠 처리된 구조물과 같이 고전적 이론 해석기법의 적용이 어려운 경우 실험적인 해석방법과 이론적인 해서방법을 혼합 사용할 수 있는 부분 구조 합성법(Substructural Synthesis Method)을 사용하는 것이 효과적이다. 부분 구조합성법은 1) 응답특성을 이용한 방법 2) 모우드 특성을 이용한 방법 3) 특성행렬을 이용한 방법 등이 있으며 본 연구에서는 부분 구조계 응답함수 로부터 직접 특성행렬을 산출하는 방법을 이용하여 전체 구조계의 동특성을 해석할 수 있는 부분 구조 합성법을 제시하였다.