• Journal of Korean Association for Spatial Structures
• /
• v.20 no.3
• /
• pp.107-116
• /
• 2020

In this paper, the displacement response to seismic loads was analyzed after installing TMD in spatial structures and high-rise buildings. In the case of a spatial structures, since it exhibits complex dynamic behavior under the influence of various vibration modes, it is not possible to effectively control the seismic response by installing only one TMD, unlike ordinary structures. Therefore, after installing eight TMDs in the structure, the correlation between displacement response and mass ratio was examined while changing the mass. The TMD must be designed to have the same frequency as the structure frequency so that the maximum response reduction effect can be exhibited. It can be confirmed that the most important variable is to select the optimal TMD mass in order to install the TMD on the structure and secure excellent control performance against the earthquake load. As a result of analyzing the TMD mass ratio, in the case of high-rise buildings, a mass ratio of 0.4% to 0.6% is preferable. In spatial structures, it is desirable to select a mass ratio of 0.1% to 0.2%. Because this study is based on the theoretical study based on numerical analysis, in order to design a TMD for a real structure, it is necessary to select within a range that does not affect the safety of the structure.

• Journal of Elementary Mathematics Education in Korea
• /
• v.22 no.2
• /
• pp.199-220
• /
• 2018

This is a traditional education content that has been consistently handled in elementary school mathematics textbooks since the first curriculum in Korea. It has been mainly used to find out the properties of the solid figure or to save the surface area. However, as the importance of spatial ability is increasingly emphasized, the nets of solids can be a very suitable learning material for dealing with the spatial ability. Therefore, in this study, we examined how the nets of solids were taught in elementary school mathematics curriculum and textbooks in Korea, and based on the analysis, we analyzed the contents of the nets of solids covered in textbooks of Japan, Singapore, Finland and Hong Kong. Through this study, we suggested the enhancement of activities to find the right nets, the presentation of solid figure from various angles, and the nets of solids with patterns for improvement of spatial visualization and spatial orientation.

• Journal of the Korean Geographical Society
• /
• v.38 no.6
• /
• pp.935-948
• /
• 2003

The State Soil Geographic (STATSGO) database is a valuable source for assessment of soil properties at a state level. Using GIS techniques, eight physical soil properties were extracted from the database, including available water capacity, clay content, soil depth, slope, depth to water table, drainage, texture, and permeability. The influences of these soil properties on drought severity, which was estimated by NDVI departures from normal, were determined over western-central Kansas. Study results showed that seven soil properties had significant relationships with drought severity with correlation coefficients, ranging from -0.89 to 0.85. Thermal emission signals from the Moderate Resolution Imaging Spectroradiometer (MODIS) had a significant relationship with drought severity expressed by NDVI departure from normal and represented spatial progression of drought over time well. High thermal signals, indicating high soil moisture deficit, emerged in the western region and their spatial distribution changed over time. Different sets of soil factors influenced drought severity among early-drying and late-drying areas.

• Smart Structures and Systems
• /
• v.16 no.6
• /
• pp.1049-1068
• /
• 2015

In the paper, the authors propose the application of operational deflection shapes (ODS) for the detection of structural changes in technical objects. The ODS matrix is used to formulate the spatial filter that is further used for damage detection as a classical modal filter (Meirovitch and Baruh 1982, Zhang et al. 1990). The advantage of the approach lies in the fact that no modal analysis is required, even on the reference spatial filter formulation and other components apart from structural ones can be filtered (e.g. harmonics of rotational velocity). The proposed methodology was tested experimentally on a laboratory stand, a frame-like structure, excited from two sources: an impact hammer, which provided a wide-band excitation of all modes, and an electro-dynamic shaker, which simulated a harmonic component in the output spectra. The damage detection capabilities of the proposed method were tested by changing the structural properties of the model and comparing the results with the original ones. The quantitative assessment of damage was performed by employing a damage index (DI) calculation. Comparison of the output of the ODS filter and the classical modal filter is also presented and analyzed in the paper. The closing section of the paper describes the verification of the method on a real structure - a road viaduct.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.138-143
• /
• 2002

This paper describes a framework for extending GIS databases to support moving object data type and query language. The rapid progress of wireless communications, positioning systems, and mobile computing devices have led location-aware applications to be essential components for commercial and industrial systems. Location-aware applications require GIS databases system to represent moving objects and to support querying on the motion properties of objects. For example, fleet management applications may require storage of information about moving vehicles. Also, advanced CRM(Customer Relationship Management) applications may require to store and query the trajectories of mobile phone users. In this trend, maintaining consistent information about the location of continuously moving objects and processing motion-specific queries is challenging problem. We formally define a data model and query language for mobile objects that includes complex evolving spatial structure, and propose core algebra to process the moving object query language. Main profit of proposed moving objects query language and algebra is that proposed model can be constructed on the top of GIS databases.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.118-121
• /
• 2006

Variations in the extent and dispersal of river plume are important in the study of coastal environment. The objectives of this study are to examine relationship between satellite detected plume area and river discharge and to clarify the temporal and spatial dynamic of plume from Tokachi River, Hokaido, Japan. We used 1.1 km spatial resolution of SeaWiFS normalized water-leaving radiance (nLw) images from 1998 to 2002. Supervised maximum likelihood classification was implemented to define classes of surface water optical properties. Satellite observed plume area was correlated to the amount of river discharge from April to October. First mode (44% of variance) of EOF analysis shows the turbid plume distribution resulting from re-suspension by strong wind mixing along the coast during winter. This mode also shows plume distribution along-shelf direction in spring and late summer. Second mode (17% of variance) shows spring pattern across-shelf direction due to strong discharge of snow melting water.

• Geomechanics and Engineering
• /
• v.12 no.3
• /
• pp.483-503
• /
• 2017

Uncertainty is a fact belonging to engineering practice. An important uncertainty that sets geotechnical engineering is the variability associated with the properties of soils or, more precisely, the characterization of soil profiles. The reason is due largely to the complex and varied natural processes associated with the formation of soil. Spatial variability analysis for the study of the stability of natural slopes, complementing conventional analyses, is able to incorporate these uncertainties. In this paper the characterization is performed in back-analysis for a case of landslide occurred to verify afterwards the presence of the conditions of shear strength at failure. This approach may support designers to make more accurate estimates regarding slope failure responding, more consciously, to the legislation dispositions about slope stability evaluation and future design. By applying different kriging techniques used for spatial analysis it has been possible to perform a 3D-slope reconstruction. The predictive analysis and the areal mapping of the soil mechanical characteristics would support the definition of priority interventions in the zones characterized by more critical values as well as slope potential instability. This tool of analysis aims to support decision-making by directing project planning through the efficient allocation of available resources.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11b
• /
• pp.254-261
• /
• 2000

Soil chemical properties, relief of field surface, SPAD values and grain yield were investigated in a 0.5ha paddy field in 1999 to obtain basic field information for precision agriculture. Descriptive statistics of field information showed that the coefficient of variation ranged from 1.63% to 38.7%. Field information showed a high spatial dependence for within paddy field. The ranges of spatial dependence were from 15m to 60m, respectively. Kriged maps enable the visualization and comparison the spatial variability of field information. The causes of spatial variability of the field information could be explained rationally by a field management map. Grain yield was negatively correlated with pH, relief values, whereas, was positively correlated with total C, total N, C/N ratio, mineralizable N, available P and exchangeable K, Ca at the significant level of 1 %.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.12
• /
• pp.35-41
• /
• 2016

In this paper, we propose a new real-time dead pixel detection method based on spatial compare filtering, which are usually used in the small target detection. Actually, the soft dead and the small target are cast in the same mold. Our proposed method detect and remove the dead pixels as applying the spatial compare filtering, into the pixel outputs of a detector after the non-uniformity correction. Therefore, we proposed method can effectively detect and replace the dead pixels regardless of the non-uniformity correction performance. In infrared camera, there are usually many dead detector pixels which produce abnormal output caused by manufactural process or operational environment. There are two kind of dead pixel. one is hard dead pixel which electronically generate abnormal outputs and other is soft dead pixel which changed and generated abnormal outputs by the planning process. Infrared camera have to perform non-uniformity correction because of structural and material properties of infrared detector. The hard dead pixels whose offset values obtained by non-uniformity correction are much larger or smaller than the average can be detected easily as dead pixels. However, some dead pixels(soft dead pixel) can remain, because of the difficulty of uncleared decision whether normal pixel or abnormal pixel.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.12-12
• /
• 2010

By using scanning tunneling microscopy/spectroscopy (STM/S), we can make images of various physical properties in nanometer-scale spatial resolutions. Here, I demonstrate imaging of two electron-correlated subjects; screening and superconductivity by STM/S. The electrostatic potential around a charge is described with the Coulomb potential. When the charge is located in a metal, the potential is modified because of the free electrons in the host. The potential modification, called screening, is one of the fundamental phenomena in the condensed matter physics. Using low-temperature STM we have developed a method to measure electrostatic potential in high spatial and energy resolutions, and observed the potential around external charges screened by two-dimensional surface electronic states. Characteristic potential decay and the Friedel oscillation were clearly observed around the charges [1]. Superconductivity of nano-size materials, whose dimensions are comparable with the coherence length, is quite different from their bulk. We investigated superconductivity of ultra-thin Pb islands by directly measuring the superconducting gaps using STM. The obtained tunneling spectra exhibit a variation of zero bias conductance (ZBC) with a magnetic field, and spatial mappings of ZBC revealed the vortex formation [2]. Size dependence of the vortex formation will be discussed at the presentation.