• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.1
• /
• pp.1-7
• /
• 2005

We propose an effective Landsat TM image compression method using the classified bidirectional prediction (CBP), the classified KLT and the SPIHT. The SPIHT is used to exploit the spatial redundancy of feature bands selected in the visible range and the infrared range separately. Regions of the prediction bands are classified into three classes in the wavelet domain, and then the CBP is performed to exploit the spectral redundancy. Residual bands that consist of difference values between the original band and the predicted band are decorrelated by the spectral KLT Finally, the three dimensional (3-D) SPIHT is used to encode the decorrelated coefficients. Experiment results show that the proposed method reconstructs higher quality Landsat TM image than conventional methods at the same bit rate.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.3
• /
• pp.28-34
• /
• 2002

This paper describes embedding non-linearly watermark data in the components of pixel intensities in the spatial domain of an image. The principle of the proposed method is that when an image is segmented regularly to the blocks, the pixels of the block have the non-linear properties without any similarity. That is, for the block with strong non-linear property human can't feel the visual different to the modified pixel values, on the other hand for the block with weak non-linear property human can feel the visual different to the a little modified pixel values. Thus we could embed the watermark data according to the non-linear property of the blocks. As the result of the simulation, against some general image processing attacks our algorithm could keep robust and be responsible for the copyright certainly. 

• Steel and Composite Structures
• /
• v.35 no.5
• /
• pp.671-685
• /
• 2020

This manuscript presents impacts of gradation of material functions and axial load functions on critical buckling loads and mode shapes of functionally graded (FG) thin and thick beams by using higher order shear deformation theory, for the first time. Volume fractions of metal and ceramic materials are assumed to be distributed through a beam thickness by both sigmoid law and symmetric power functions. Ceramic-metal-ceramic (CMC) and metal-ceramic-metal (MCM) symmetric distributions are proposed relative to mid-plane of the beam structure. The axial compressive load is depicted by constant, linear, and parabolic continuous functions through the axial direction. The equilibrium governing equations are derived by using Hamilton's principles. Numerical differential quadrature method (DQM) is developed to discretize the spatial domain and covert the governing variable coefficients differential equations and boundary conditions to system of algebraic equations. Algebraic equations are formed as a generalized matrix eigenvalue problem, that will be solved to get eigenvalues (buckling loads) and eigenvectors (mode shapes). The proposed model is verified with respectable published work. Numerical results depict influences of gradation function, gradation parameter, axial load function, slenderness ratio and boundary conditions on critical buckling loads and mode-shapes of FG beam structure. It is found that gradation types have different effects on the critical buckling. The proposed model can be effective in analysis and design of structure beam element subject to distributed axial compressive load, such as, spacecraft, nuclear structure, and naval structure.

• Journal of Broadcast Engineering
• /
• v.23 no.1
• /
• pp.146-153
• /
• 2018

This paper presents a superresolution demosaicing technique that can restore high-resolution color image from differently blurred low resolution images in Bayer domain. The proposed superresolution demosaicing algorithm uses an aperture mask wheel to get differently blurred low resolution images, so we just need to estimate point spread function at each frame. In addition, it does not require image registration because there is no translational motion between low resolution images. By using a rotatable aperture mask wheel, consecutive captured images provide sufficiently exclusive information for superresolution. Therefore, the proposed method can reduce the registration error between the low-resolution image as well as the calculation amount for superresolution restoration. The existing lens system of the camera can be extended to obtain a superresolution image by only adding an rotatable aperture mask wheels. Finally, in order to verify the performance of the proposed system, experimental results are performed. The proposed method showed the significant improvements in the sense of spatial and color resolution.

• Korean Journal of Remote Sensing
• /
• v.35 no.6_3
• /
• pp.1299-1312
• /
• 2019

As land remote sensing applications are expanding to the extraction of quantitative information, the importance of atmospheric correction is increasing. Considering the difficulty of atmospheric correction for land images, it should be applied when it is necessary. The quantitative information extraction and time-series analysis on biophysical variables in land surfaces are two major applications that need atmospheric correction. Atmospheric aerosol content and column water vapor, which are very dynamic in spatial and temporal domain, are the most influential elements and obstacles in retrieving accurate surface reflectance. It is difficult to obtain aerosol and water vapor data that have suitable spatio-temporal scale for high- and medium-resolution multispectral imagery. Selection of atmospheric correction method should be based on the availability of appropriate aerosol and water vapor data. Most atmospheric correction of land imagery assumes the Lambertian surface, which is not the case for most natural surfaces. Further BRDF correction should be considered to remove or reduce the anisotropic effects caused by different sun and viewing angles. The atmospheric correction methods of optical imagery over land will be enhanced to meet the need of quantitative remote sensing. Further, imaging sensor system may include pertinent spectral bands that can help to extract atmospheric data simultaneously.

• Korea-Australia Rheology Journal
• /
• v.15 no.3
• /
• pp.131-150
• /
• 2003

A new numerical algorithm of finite element methods is presented to solve high Deborah number flow problems with geometric singularities. The steady inertialess planar 4 : 1 contraction flow is chosen for its test. As a viscoelastic constitutive equation, we have applied the globally stable (dissipative and Hadamard stable) Leonov model that can also properly accommodate important nonlinear viscoelastic phenomena. The streamline upwinding method with discrete elastic-viscous stress splitting is incorporated. New interpolation functions classified as rational interpolation, an alternative formalism to enhance numerical convergence at high Deborah number, are implemented not for the whole set of finite elements but for a few elements attached to the entrance comer, where stress singularity seems to exist. The rational interpolation scheme contains one arbitrary parameter b that controls the singular behavior of the rational functions, and its value is specified to yield the best stabilization effect. The new interpolation method raises the limit of Deborah number by 2∼5 times. Therefore on average, we can obtain convergent solution up to the Deborah number of 200 for which the comer vortex size reaches 1.6 times of the half width of the upstream reservoir. Examining spatial violation of the positive definiteness of the elastic strain tensor, we conjecture that the stabilization effect results from the peculiar behavior of rational functions identified as steep gradient on one domain boundary and linear slope on the other. Whereas the rational interpolation of both elastic strain and velocity distorts solutions significantly, it is shown that the variation of solutions incurred by rational interpolation only of the elastic strain is almost negligible. It is also verified that the rational interpolation deteriorates speed of convergence with respect to mesh refinement.

• Journal of Korea Multimedia Society
• /
• v.14 no.2
• /
• pp.210-218
• /
• 2011

Generally, GIS digital map has been represented and transmitted by ASCII and Binary data forms. Among these forms, Binary form has been widely used in many GIS application fields for the transmission of mass map data. In this paper, we present a hierarchical compression technique of polyline and polygon components for effective storage and transmission of vector map with various degree of decision. These components are core geometric components that represent main layers in vector map. The proposed technique performs firstly the energy compaction of all polyline and polygon components in spatial domain for the lossless compression of detailed vector map and compress independently integer parts and fraction parts of 64bit floating points. From experimental results, we confirmed that the proposed technique has superior compressive performance to the conventional data compression of 7z, zip, rar and gz.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.23 no.2
• /
• pp.307-318
• /
• 2013

Smart grid is composed of variable domains including different systems, and different types of the access control are needed in the multiple domain. Therefore, the access control model suitable for the smart grid environment is required to minimize access control error and deny the unauthorized access. This paper introduce the access control requirements in the smart grid environment and propose the access control model, SG-RBAC, satisfied with the requirements. SG-RBAC model imposes constraints on the access right activation according to the user property, the role property, and the system property. It also imposes constraints on the delegation and the inheritance of access right according to temporal/spatial information and a crisis occurrence.

• Atmosphere
• /
• v.29 no.4
• /
• pp.391-401
• /
• 2019

This study first investigates the changes of the mean and extreme temperatures and precipitation in East Asia (EA) under stabilized 1.5℃ and 2℃ warming conditions above preindustrial levels provided by HAPPI project. Here, five model with 925 members for 10-year historical period (2006~2015) and 1.5/2.0℃ future warming scenarios (2091~2100) have been used and monthly based data have been analyzed. The results show that the spatial distribution fields over EA and domain averaged variables in HAPPI 1.5/2.0℃ hindcast simulations are comparable to observations. It is found that the magnitude of mean temperature warming in EA and Korea is similar to the global mean, but for extreme temperatures local higher warming trend for minimum temperature is significant. In terms of precipitation, most subregion in EA will see more increased precipitation under 1.5/2.0℃ warming compared to the global mean. These attribute for probability density function of analyzed variables to get wider with increasing mean values in 1.5/2.0℃ warming conditions. As the result of vulnerability of 0.5℃ additional warming from 1.5 to 2.0℃, 0.5℃ additional warming contributes to the increases in extreme events and especially the impact over South Korea is slightly larger than EA. Therefore, limiting global warming by 0.5℃ can help avoid the increases in extreme temperature and precipitation events in terms of intensity and frequency.

• Journal of Broadcast Engineering
• /
• v.12 no.2
• /
• pp.185-192
• /
• 2007

The interpolation is used in many image processing applications such as image enhancement, de-interlacing/scan-rate conversion, wavelet transforms based on the lifting scheme, and so on. Among these, de-interlacing and scan-rate conversion are proposed for the digital TV applications. The de-interlacing algorithm can be classified into two categories. The first one uses only one field, called intra-field de-interlacing, and the other uses multiple field, called inter-field de-interlacing. In this paper, an efficient de-interlacing algorithm using spatial domain information is proposed far the interpolation of interlaced images. By efficiently estimating the directional correlations, improved interpolation accuracy has been achieved. In addition, the proposed method is simply structured and is easy to implement. Extensive simulations conducted for various images and video sequences have shown the efficacy of the proposed method with significant improvement over the previous intra-field do-interlacing methods in terms of the objective image quality as well as the subjective image quality.